Standard Svensk standard · SS-EN 1366-3:2022

Provning av brandmotstånd för installationer i byggnader - Del 3: Tätning av genomföringar

Status: Gällande

Köp denna standard

Standard Svensk standard · SS-EN 1366-3:2022

Provning av brandmotstånd för installationer i byggnader - Del 3: Tätning av genomföringar
Prenumerera på standarden - Läs mer Dölj
Pris: 1 838 SEK
standard ikon pdf

PDF

Pris: 1 838 SEK
standard ikon

Papper

Pris: 2 940,80 SEK
standard ikon pdf + standard ikon

PDF + papper

Fler alternativ Färre alternativ
Omfattning
This part of the EN 1366 series specifies a method of test and criteria for the evaluation (including field of direct application rules) of the ability of a penetration seal to maintain the fire resistance of a separating element at the position at which it has been penetrated by a service or services. Penetration seals used to seal gaps around chimneys, air ventilation systems, fire rated ventilation ducts, fire rated service ducts, shafts and smoke extraction ducts as well as combined penetration seals are excluded from this part of the EN 1366 series.
NOTE EN 15882-5 [6] deals with penetration seals including ducts and dampers.
Supporting constructions are used in this part of the EN 1366 series to represent separating elements such as walls or floors. These simulate the interaction between the test specimen and the separating element into which the sealing system is to be installed in practice.
This part of the EN 1366 series is intended to be used in conjunction with EN 1363 1.
The purpose of a test described in this part of the EN 1366 series is to assess the integrity and insulation performance of the penetration seal, of the penetrating service or services and of the separating element in the surrounding area of the penetration seal.
No information can be implied by the test concerning the influence of the inclusion of such penetrations and penetration seals on the loadbearing capacity of the separating element.
It is assumed that in each case the lintel above a penetration seal in the wall is designed in hot and cold state in a way that it does not apply any additional vertical load on the penetration seal.
It is not the intention of this test to provide quantitative information on the rate of leakage of smoke and/or hot gases or on the transmission or generation of fumes. Such phenomena are only noted in the test report in describing the general behaviour of test specimens during the test.
Tests in accordance with this part of the EN 1366 series ...

Ämnesområden

Brandtålighet för byggnadsmaterial (13.220.50)


Köp denna standard

Standard Svensk standard · SS-EN 1366-3:2022

Provning av brandmotstånd för installationer i byggnader - Del 3: Tätning av genomföringar
Prenumerera på standarden - Läs mer Dölj
Pris: 1 838 SEK
standard ikon pdf

PDF

Pris: 1 838 SEK
standard ikon

Papper

Pris: 2 940,80 SEK
standard ikon pdf + standard ikon

PDF + papper

Fler alternativ Färre alternativ

Produktinformation

Språk: Engelska

Framtagen av: Brandsäkerhet, SIS/TK 181

Internationell titel: Fire resistance tests for service installations - Part 3: Penetration seals

Artikelnummer: STD-80033325

Utgåva: 3

Fastställd: 2022-01-03

Antal sidor: 200

Ersätter: SS-EN 1366-3:2009