Standard Tekniska specifikationer · SIS-CEN/TS 16498:2013

Färg och lack - Färger och färgsystem för målning på trä utomhus - Bedömning av missfärgning (tannin)

Status: Gällande

This Technical Specification specifies a test method for assessing the discoloration of coatings on wood by tannin staining due to wood extractives. The method uses an extract from Merbau wood as an indicator. Bleeding of wood extractives is assessed at two specified stages firstly after coating application and secondly after cyclic climate exposure. A qualification of colour differences that can be attributed to three different causes, bleeding of extractives, low opacity of the coating film or general yellowing in climate exposure, is included. This document does not specify acceptance values for colour differences that can be tolerated and it is not applicable to staining caused by knots for which there is a different test method (e. g. CEN/TS 16359).


Färg och lack (87.040)


Språk: Engelska

Framtagen av: Färg och lack, SIS/TK 433

Internationell titel:

Artikelnummer: STD-100237

Utgåva: 1

Fastställd: 2013-12-03

Antal sidor: 20