Järnvägar - Bulleremission - Mätning av buller i förarhytter
Prenumerera på standarder med tjänst SIS Abonnemang. Genom att prenumerera får du effektiv åtkomst till gällande standarder och säkerställer att ditt företag alltid har tillgång till senaste utgåvan.
Läs mer om SIS Abonnemang
This European Standard specifies a type test method to measure noise levels inside the driver's cabs of railway vehicles for assessing compliance with the relevant European legislation. NOTE The relevant European legislation includes Directive 2003/10/EC of 6 February 2003 and the Commission Decisions of 23 December 2005 (Technical specification for interoperability relating to the subsystem ‘rolling stock — noise’ of the trans-European conventional rail system) and of 21 February 2008 (Technical specification for interoperability relating to the ‘rolling stock’ sub-system of the trans-European high-speed rail system). This method is applicable to: - the measurement of noise inside driver's cab resulting from the sounding of external warning horns when the vehicle is stationary; - the measurement of noise inside the driver cab while the vehicle is running. The method is not applicable to: - complementary measurements that can be requested for acceptance tests, but which are not required by the TSIs referred to in this standard; - the measurement of the noise from internal and external audible devices other than external warning horns; - routine monitoring of the noise exposure of train crew. The test procedures specified in this European Standard are of engineering grade (grade 2) with a precision of ± 2 dB, which is the preferred method for noise declaration purposes, as defined in EN ISO 12001.
Järnvägar - Bulleremission - Mätning av buller i förarhytter
Prenumerera på standarder med tjänst SIS Abonnemang. Genom att prenumerera får du effektiv åtkomst till gällande standarder och säkerställer att ditt företag alltid har tillgång till senaste utgåvan.
Läs mer om SIS Abonnemang