Hydraulik - Filter - Flerstegsmetod för utvärdering av filtreringsegenskaper (ISO 16889:2008, IDT)
Prenumerera på standarder med tjänst SIS Abonnemang. Genom att prenumerera får du effektiv åtkomst till gällande standarder och säkerställer att ditt företag alltid har tillgång till senaste utgåvan.
Läs mer om SIS Abonnemang
This International Standard describes the following: a) a multi-pass filtration performance test with continuous contaminant injection for hydraulic fluid power filter elements; b) a procedure for determining the contaminant capacity, particulate removal and differential pressure characteristics; c) a test currently applicable to hydraulic fluid power filter elements that exhibit an average filtration ratio greater than or equal to 75 for particle sizes u 25 µm(c), and a final reservoir gravimetric level of less than 200 mg/L; NOTE It is necessary to determine by validation the range of flow rates and the lower particle size limit that can be used in test facilities. d) a test using ISO medium test dust contaminant and a test fluid in accordance with Annex A. This International Standard is intended to provide a test procedure that yields reproducible test data for appraising the filtration performance of a hydraulic fluid power filter element without influence of electrostatic charge. This International Standard applies to three test conditions: - test condition 1, with a base upstream gravimetric level of 3 mg/L; - test condition 2, with a base upstream gravimetric level of 10 mg/L; - test condition 3, with a base upstream gravimetric level of 15 mg/L.
Hydraulik - Filter - Flerstegsmetod för utvärdering av filtreringsegenskaper (ISO 16889:2008, IDT)
Prenumerera på standarder med tjänst SIS Abonnemang. Genom att prenumerera får du effektiv åtkomst till gällande standarder och säkerställer att ditt företag alltid har tillgång till senaste utgåvan.
Läs mer om SIS Abonnemang
Internationell titel: Hydraulic fluid power - Filters - Multi-pass method for evaluating filtration performance of a filter element (ISO 16889:2008, IDT)