Standard Svensk standard · SS-EN ISO 8130-1:2019

Pulverfärg - Del 1: Bestämning av partikelstorlek genom siktning (ISO 8130-1:2019)

Status: Gällande

This document specifies a method for the determination of the particle size distribution of coating powders by sieve analysis. Particle size distributions with a maximum of less than 100 µm is determined by laser diffraction, ISO 8130-13. This method is used especially for determining the oversize material or for the presence of contamination and can be used as a quality control procedure ("go"/"no go" test) by checking the amount retained on a single sieve. The following particle sizes are typical for coating powders, however the particle size can deviate depending on the application: — thin-film technology: 1 µm to 63 µm; — electrostatic coating: 10 µm to 200 µm; — fluidizing-bed method: 100 µm and above. NOTE Sieves with a mesh size smaller than 32 µm are not practical and are likely to become blind during use.


Färg och lack (87.040)


Språk: Engelska

Framtagen av: Färg och lack, SIS/TK 433

Internationell titel: Coating powders - Part 1: Determination of particle size distribution by sieving (ISO 8130-1:2019)

Artikelnummer: STD-80011825

Utgåva: 2

Fastställd: 2019-05-14

Antal sidor: 24

Ersätter: SS-EN ISO 8130-1:2010