EN 1627:2021/prA1, Pedestrian doorsets, windows, curtain walling, grilles and shutters - Burglar resistance - Requirements and classification (40.60)
EN 673:2024/prA1, Glass in building - Determination of thermal transmittance (U value) - Calculation method (40.60)
EN 13116:2024/prA1, Curtain walling - Resistance to wind load - Performance requirements (40.20)
EN 12152:2023/prA1, Curtain walling - Air permeability - Performance requirements and classification (40.20)
EN 12153:2023/prA1, Curtain walling - Air permeability - Test method (40.20)
ISO/DIS 25161, Doors, windows and curtain walling — Watertightness of curtain walling under dynamic pressure — Test method (40.20)
prEN 18473, Industrial, commercial and garage doors, gates and barriers - Environmental Product Declarations - Product category rules complementary to EN 15804 for industrial, commercial and garage doors, gates and barriers (40.10)
SS 810000 (20.99)
prEN 14202 rev, Awnings, Blinds and shutters — Suitability for use of drives — Requirements and test methods (10.99)
prEN 14202 rev, Blinds and shutters - Suitability for use of tubular and square motorizations - Requirements and test methods (10.99)
prEN 12427 rev, Industrial, commercial and garage doors and gates - Air permeability - Test method (10.99)
prEN 12444 rev, Industrial, commercial and garage doors and gates - Resistance to wind load - Testing and calculation (10.99)
prEN 12489 rev, Industrial, commercial and garage doors and gates - Resistance to water penetration - Test method (10.99)
prEN 13241 rev, Industrial, commercial and garage doors, gates and barriers — Product standard, performance characteristics (10.99)
-, Glass in building - In-plane thermally induced stress - calculation method (10.99)
EN 12453:2017+A1:2021/prA2, Industrial, commercial and garage doors and gates — Safety in use of power operated doors — Requirements and test methods (10.99)
EN 12978:2024/prA1, Industrial, commercial and garage doors and gates and pedestrian doorsets - Protective devices for power operated doors and gates - Requirements and test methods (10.99)
EN 16005:2023+A1:2024/prA2, Power operated pedestrian doorsets - Safety in use - Requirements and test methods (10.99)
prEN 1121 rev, Doors - Behaviour between two different climates - Test method (10.99)
EN 17352:2022/prA1, Power operated pedestrian entrance control equipment - Safety in use - Requirements and test methods (10.99)
EN 1993-1-1:2022+A1, Eurocode 3 - Design of steel structures - Part 1-1: General rules and rules for buildings (10.99)
SS 818135, Windows — Glazing material for single glazing – Requirements and testing (10.73)
prEN 1063 rev, Glass in building - Security glazing - Testing and classification of resistance against bullet attack (00.60)
-, Glass in building — Smart CE-marking — Data template for the declaration of performance (00.60)
-, Glass in building — Vacuum insulating glass units — Part 1: Generalities Description, quality requirements, load resistance and Factory Production Control (00.60)
-, Industrial, commercial and garage doors and gates – Burglar resistance – Requirements, classification and test methods (00.60)
-, Glass in building - Vacuum insulating glass - Basic specification of products and evaluation methods of performances (00.60)
prEN 1279-1 rev, Glass in Building - Insulating glass units - Part 1: Generalities, system description, rules for substitution, tolerances and visual quality (00.60)
prEN 1279-2 rev, Glass in building - Insulating glass units - Part 2: Long term test method and requirements for moisture penetration (00.60)
prEN 1279-3 rev, Glass in building - Insulating glass units - Part 3: Long term test method and requirements for gas leakage rate and for gas concentration tolerances (00.60)
prEN 1279-4 rev, Glass in Building - Insulating Glass Units - Part 4: Methods of test for the physical attributes of edge seal components and inserts (00.60)
prEN 1279-6 rev, Glass in building - Insulating glass units - Part 6: Factory production control and periodic tests (00.60)
prEN 1288-6, Glass in building - Determination of the bending strength of glass - Part 6: Test of the edge strength (four point bending – edgewise) (00.60)
prEN 13022-1 rev, Glass in building - Structural sealant glazing - Part 1: Glass products for structural sealant glazing systems for supported and unsupported monolithic and multiple glazing (00.60)
prEN 13022-2 rev, Glass in building - Structural sealant glazing - Part 2: Assembly rules (00.60)
prEN 12150-1 rev, Glass in building - Thermally toughened soda lime silicate safety glass - Part 1: Definition and description (00.60)
prEN 14179-1 rev, Glass in building - Heat soaked thermally toughened soda lime silicate safety glass - Part 1: Definition and description (00.60)
prEN 19102-1-1, Eurocode 12 — Design of tensioned membrane structures – Part 1-1: General rules and rules for buildings, bridges and civil engineering structures (00.60)
prEN 19102-1-2, Eurocode 12 — Design of tensioned membrane structures – Part 1-2: Structural fire design (00.60)
prEN 19102-2, Eurocode 12 — Design of tensioned membrane structures – Part 2: Execution (00.60)
prEN 356 rev, Glass in building - Security glazing - Testing and classification of resistance against manual attack (00.60)
prEN 410-2, EN 410-2 - Glass in building — Determination of luminous and solar characteristics of glazing – Part 2 -Calculation for light-scattering materials (00.60)
prEN 410-3, EN 410-3 - Glass in building — Determination of luminous and solar characteristics of glazing – part 3 - Measurement (00.60)
prEN 572-1 rev, Glass in building - Basic soda-lime silicate glass products - Part 1: Definitions and general physical and mechanical properties (00.60)
prEN 572-2 rev, Glass in building - Basic soda lime silicate glass products - Part 2: Float glass (00.60)
ISO/PWI 15822, Test method of doorset opening performance in diagonal deformation — Seismic aspects (00.00)
ISO/PWI 27179, Profile for doors and windows - Vocabulary (00.00)
