prEN 14532-1, Welding consumables - Test methods and quality requirements - Part 1: Primary methods and assessment of consumables for steel, nickel and nickel alloys (45.99)
prEN 10160, Non-destructive testing - Ultrasonic testing of steel flat product of thickness equal or greater than 5 mm (reflection method) (45.99)
prEN 10307, Non-destructive testing - Ultrasonic testing of austenitic and austenitic-ferritic stainless steels flat products of thickness equal to or greater than 6 mm (reflection method) (45.99)
prEN ISO 20769-1, Non-destructive testing - Radiographic inspection of corrosion and deposits in pipes by X- and gamma rays - Part 1: Tangential radiographic inspection (ISO/DIS 20769-1:2026) (45.99)
prEN ISO 20769-2, Non-destructive testing - Radiographic inspection of corrosion and deposits in pipes by X- and gamma rays - Part 2: Double wall radiographic inspection (ISO/DIS 20769-2:2026) (45.99)
ISO/DIS 25222-2, Non-destructive testing — Characterization and verification of ultrasonic air-coupled equipment — Part 2: Probes (40.99)
ISO/DIS 16371-1, Non-destructive testing — Industrial computed radiography with storage phosphor imaging plates — Part 1: Classification of systems and long-term stability (40.99)
prEN ISO 16371-1, Non-destructive testing — Industrial computed radiography with storage phosphor imaging plates — Part 1: Classification of systems (40.60)
prEN 13477-1, Non-destructive testing - Acoustic emission testing - Equipment characterization - Part 1: Equipment description (40.60)
prEN ISO 25222-2, Non-destructive testing - Characterization and verification of ultrasonic air-coupled equipment - Part 2: Probes (ISO/DIS 25222-2:2026) (40.60)
prEN ISO 23279, Non-destructive testing of welds - Ultrasonic testing - Characterization of discontinuities in welds (ISO/DIS 23279:2026) (40.20)
prEN ISO 20601, Non-destructive testing of welds - Ultrasonic testing - Phased array technique for thin-walled steel components (ISO/DIS 20601:2026) (40.20)
prEN ISO 17640, Non-destructive testing of welds - Ultrasonic testing - Techniques, testing levels, and assessment (ISO/DIS 17640:2026) (40.20)
prEN ISO 19232-1, Non-destructive testing - Image quality of radiographs - Part 1: Determination of the image quality value using wire-type image quality indicators (ISO/DIS 19232‑1:2026) (40.20)
prEN ISO 11666, Non-destructive testing of welds - Ultrasonic testing - Acceptance levels (ISO/DIS 11666:2026) (40.20)
ISO/DIS 23279, Non-destructive testing of welds — Ultrasonic testing — Characterization of discontinuities in welds (40.20)
ISO/DIS 17640, Non-destructive testing of welds — Ultrasonic testing — Techniques, testing levels, and assessment (40.20)
ISO/DIS 19232-1, Non-destructive testing — Image quality of radiographs — Part 1: Determination of the image quality value using wire-type image quality indicators (40.20)
ISO/DIS 20601, Non-destructive testing of welds — Ultrasonic testing — Phased array technique for thin-walled steel components (40.20)
ISO/DIS 22527-1, Non-destructive testing — Visual testing using industrial endoscopes — Part 1: Method (40.20)
ISO/DIS 22527-2, Non-destructive testing — Visual testing using industrial endoscopes — Part 2: Atlas (40.20)
ISO/DIS 11666, Non-destructive testing of welds — Ultrasonic testing — Acceptance levels (40.20)
prEN ISO 22688, Brazing - Quality requirements for brazing of metallic materials (ISO 22688:2020) (40.10)
prEN ISO 21224, Evaluation of centreline segregation of continuously cast slabs (ISO 21224:2025) (40.10)
prEN ISO 148-4, Metallic materials - Charpy pendulum impact test - Part 4: Testing of miniature Charpy-type V-notch test pieces (ISO 148-4:2026) (40.10)
prEN ISO 4969, Steel - Etching method for macroscopic examination (ISO 4969:2015) (40.10)
ISO/DIS 10863, Non-destructive testing of welds — Ultrasonic testing — Use of time-of-flight diffraction technique (TOFD) (40.00)
ISO/DIS 15626, Non-destructive testing of welds — Time-of-flight diffraction technique (TOFD) — Acceptance levels (40.00)
ISO/DIS 22825, Non-destructive testing of welds — Ultrasonic testing — Testing of welds in austenitic steels and nickel-based alloys (40.00)
ISO/CD 19285, Non-destructive testing of welds — Phased array ultrasonic testing (PAUT) — Acceptance levels (30.99)
ISO/CD 13588, Non-destructive testing of welds — Ultrasonic testing — Phased array technique (30.99)
ISO/CD 25108, Non-destructive testing — NDT personnel training organizations (30.92)
ISO/CD 32543-4, Non-destructive testing — Characteristics of focal spots in industrial X-ray systems — Part 4: Measurement of the effective focal spot size of micro- and nanofocus X-ray tubes with spot sizes < 100 µm using line group test objects (30.60)
ISO/CD 32543-5, Non-destructive testing — Characteristics of focal spots in industrial X-ray systems — Part 5: Focal spot reconstruction technique (30.60)
ISO/CD TS 16829, Non-destructive testing — Automated ultrasonic testing — Selection and application of systems (30.60)
ISO/CD 25818, Non-destructive testing — Magnetic flux leakage testing — General principles (30.20)
ISO/CD 19232-5, Non-destructive testing — Image quality of radiographs — Part 5: Determination of the image unsharpness and basic spatial resolution value using duplex wire-type image quality indicators (30.00)
ISO/WD 23432, Non-destructive testing — Gamma scanning method of highly attenuating container walls — Evaluation of the integrity of various shielding structures by using gamma topography technique (20.60)
ISO/WD 20807, Non-destructive testing — Qualification of personnel for limited application of non-destructive testing (20.60)
ISO/WD 22232-1, Non-destructive testing — Characterization and verification of ultrasonic test equipment — Part 1: Instruments (20.20)
ISO/WD 23243, Non-destructive testing — Ultrasonic testing with arrays — Vocabulary (20.20)
ISO/AWI 15548-2, Non-destructive testing — Equipment for eddy current examination — Part 2: Part 2: Probe characteristics and verification (20.00)
ISO/AWI 17636-2, Non-destructive testing of welds — Radiographic testing — Part 2: X- and gamma-ray techniques with digital detectors (20.00)
ISO/AWI 22232-2, Non-destructive testing — Characterization and verification of ultrasonic test equipment — Part 2: Probes (20.00)
ISO/AWI 22232-3, Non-destructive testing — Characterization and verification of ultrasonic test equipment — Part 3: Combined equipment (20.00)
ISO/AWI 25107, Non-destructive testing — NDT training syllabuses (20.00)
prEN ISO 10113 rev, Metallic materials — Sheet and strip — Determination of plastic strain ratio (10.99)
prEN ISO 10863 rev, Non-destructive testing of welds — Ultrasonic testing — Use of time-of-flight diffraction technique (TOFD) (10.99)
prEN ISO 15548-2 rev, Non-destructive testing — Equipment for eddy current examination — Part 2: Part 2: Probe characteristics and verification (10.99)
prEN ISO 15614-15, Specification and qualification of welding procedures for metallic materials — Welding procedure test — Part 15: Manufacturing Material Using Wire Direct Energy Deposition (10.99)
prEN ISO 15626 rev, Non-destructive testing of welds — Time-of-flight diffraction technique (TOFD) — Acceptance levels (10.99)
prEN ISO 15653 rev, Metallic materials — Method of test for the determination of quasistatic fracture toughness of welds (10.99)
prCEN ISO/TS 8182, Welding and allied processes — Requirements and recommendations for the use of the welding parameters related to the arc energy for qualification and specification of welding procedures (10.99)
prCEN/TS 14748 rev, Non-destructive testing - Methodology for qualification of non-destructive tests (10.99)
prEN ISO 17501, Non-destructive testing - Thermographic testing - Active thermography with laser excitation (10.99)
prEN ISO 17634 rev, Welding consumables — Tubular cored electrodes for gas shielded metal arc welding of creep-resisting steels — Classification (10.99)
prEN ISO 17636-2 rev, Non-destructive testing of welds — Radiographic testing — Part 2: X- and gamma-ray techniques with digital detectors (10.99)
prEN ISO 19232-5 rev, Non-destructive testing — Image quality of radiographs — Part 5: Determination of the image unsharpness and basic spatial resolution value using duplex wire-type image quality indicators (10.99)
prEN ISO 19285 rev, Non-destructive testing of welds — Phased array ultrasonic testing (PAUT) — Acceptance levels (10.99)
prEN ISO 13588 rev, Non-destructive testing of welds — Ultrasonic testing — Use of automated phased array technology (10.99)
prEN ISO 14171 rev, Welding consumables — Solid wire electrodes, tubular cored electrodes and electrode/flux combinations for submerged arc welding of non alloy and fine grain steels — Classification (10.99)
prEN 13479 rev, Welding consumables - General product standard for filler metals and fluxes for fusion welding of metallic materials (10.99)
prEN ISO 21904-1 rev, Health and safety in welding and allied processes — Equipment for capture and separation of welding fume — Part 1: General requirements (10.99)
prEN ISO 21904-2 rev, Health and safety in welding and allied processes — Equipment for capture and separation of welding fume — Part 2: Requirements for testing and marking of separation efficiency (10.99)
prEN ISO 21904-4 rev, Health and safety in welding and allied processes — Equipment for capture and separation of welding fume — Part 4: Determination of the minimum air volume flow rate of capture devices (10.99)
prEN ISO 22232-1 rev, Non-destructive testing — Characterization and verification of ultrasonic test equipment — Part 1: Instruments (10.99)
prEN ISO 22232-2 rev, Non-destructive testing — Characterization and verification of ultrasonic test equipment — Part 2: Probes (10.99)
prEN ISO 22232-3 rev, Non-destructive testing — Characterization and verification of ultrasonic test equipment — Part 3: Combined equipment (10.99)
-, Non-destructive testing – Evaluation of testing data – Guideline to estimate the reliability of applications (10.99)
ISO/AWI 3059, Non-destructive testing — Penetrant testing and magnetic particle testing — Viewing conditions (10.99)
ISO/AWI 3452-3, Non-destructive testing — Penetrant testing — Part 3: Reference test blocks (10.99)
ISO/AWI 3452-5, Non-destructive testing — Penetrant testing — Part 5: Penetrant testing at temperatures higher than 50 degrees C (10.99)
ISO/AWI 3452-6, Non-destructive testing — Penetrant testing — Part 6: Penetrant testing at temperatures lower than 10 degrees C (10.99)
prEN ISO 22825 rev, Non-destructive testing of welds — Ultrasonic testing — Testing of welds in austenitic steels and nickel-based alloys (10.99)
prEN ISO 23243 rev, Non-destructive testing — Ultrasonic testing with arrays — Vocabulary (10.99)
prEN ISO 25107, Non-destructive testing — NDT training syllabuses (10.99)
prEN ISO 25108, Non-destructive testing — NDT personnel training organizations (10.99)
prEN ISO 3059 rev, Non-destructive testing — Penetrant testing and magnetic particle testing — Viewing conditions (10.99)
prEN ISO 32543-4, Non-destructive testing -- Characteristics of focal spots in industrial X-ray systems -- Part 4: Measurement of the effective focal spot size of micro- and nanofocus X-ray tubes with spot sizes 100 μm (10.99)
prEN ISO 32543-5, Non-destructive testing -- Characteristics of focal spots in industrial X-ray systems for use in non-destructive testing -- Part 5: Focal spot reconstruction technique (10.99)
prEN ISO 3452-3 rev, Non-destructive testing — Penetrant testing — Part 3: Reference test blocks (10.99)
prEN ISO 3452-5 rev, Non-destructive testing — Penetrant testing — Part 5: Penetrant testing at temperatures higher than 50 degrees C (10.99)
prEN ISO 3452-6 rev, Non-destructive testing — Penetrant testing — Part 6: Penetrant testing at temperatures lower than 10 degrees C (10.99)
prEN ISO 5172 rev, Gas welding equipment — Blowpipes for gas welding, heating and cutting — Specifications and tests (10.99)
prEN ISO 6506-1 rev, Metallic materials — Brinell hardness test — Part 1: Test method (10.99)
prEN ISO 6506-2 rev, Metallic materials — Brinell hardness test — Part 2: Verification and calibration of testing machines (10.99)
prEN ISO 6506-3 rev, Metallic materials — Brinell hardness test — Part 3: Calibration of reference blocks (10.99)
ISO/PWI 25148-1, Ultrasonic method for residual stress characterization — Part 1: Critically refracted longitudinal wave (00.60)
ISO/PWI 25148-2, Ultrasonic method for residual stress characterization — Part 2: Bulk wave (00.60)
-, Non-destructive testing — Pulse thermography using optical excitation (00.60)
prEN 13554 rev, Non-destructive testing - Acoustic emission testing - General principles (00.60)
prEN 17119 rev, Non-destructive testing - Thermographic testing - Active thermography (00.60)
ISO/PWI 12718, Non-destructive testing — Eddy current testing — Vocabulary (00.00)
ISO/PWI 20669, Non-destructive testing — Pulsed eddy current testing of ferromagnetic metallic components (00.00)
