ISO/PRF 11177, Vitreous and porcelain enamels — Inside and outside enamelled valves and pressure pipe fittings for untreated and potable water supply — Quality requirements and testing (50.00)
ISO/PRF 13060, Adhesion evaluation method for microcircuits on printed circuit board (PCB) by scratch test (50.00)
ISO/PRF 28706-2, Vitreous and porcelain enamels — Determination of resistance to chemical corrosion — Part 2: Determination of resistance to chemical corrosion by boiling acids, boiling neutral liquids, alkaline liquids and/or their vapours (50.00)
ISO/PRF 28706-4, Vitreous and porcelain enamels — Determination of resistance to chemical corrosion — Part 4: Determination of resistance to chemical corrosion by alkaline liquids using a cylindrical vessel (50.00)
ISO/PRF 4531, Vitreous and porcelain enamels — Release from enamelled articles in contact with food — Methods of test and limits (50.00)
prEN ISO 14713-2, Oorganiska ytbeläggningar – Zinkbeläggningar – Vägledning och rekommendationer för korrionsskydd av järn och stål i konstruktioner – Del 2: Varmförzinkning (45.99)
prEN ISO 9225, Korrosion hos metaller och legeringar – Atmosfärers korrosivitet – Mätning av miljöparametrar som påverkar atmosfärens korrosivitet (40.60)
ISO/DIS 25363, Determination of fracture toughness of PVD coatings by micropillar indentation method (40.20)
ISO/DIS 25912, Metallic and other inorganic coatings — Hexavalent chromium-free chemical conversion coatings on aluminium and its alloys (40.20)
prEN ISO 23131-2, Ellipsometry - Part 2: Bulk material model (ISO 23131-2:2026) (40.10)
prEN ISO 23131-3, Ellipsometry - Part 3: Transparent single layer model (ISO 23131-3:2026) (40.10)
ISO/DIS 25491, Laser surface treatment and related coatings — Terminology, Classification (40.00)
ISO/DIS 25141, Atomic layer deposition of alumina coatings for silicon solar cell — Requirements and test methods (40.00)
ISO/DIS 25142, Area selective atomic layer deposition — Specification and test methods (40.00)
ISO 27874:2008/DAmd 1, Metallic and other inorganic coatings — Electrodeposited gold and gold alloy coatings for electrical, electronic and engineering purposes — Specification and test methods — Amendment 1 (40.00)
EN ISO 27874:2008/prA1, Metallic and other inorganic coatings — Electrodeposited gold and gold alloy coatings for electrical, electronic and engineering purposes — Specification and test methods — Amendment 1 (30.99)
ISO/CD 25892, Powder coating by atomic layer deposition — Specification and test methods (30.60)
ISO/CD 25976, Metallic coatings — Technical requirements and testing of metallic laser cladding coatings (30.60)
ISO/CD 26181, Heat-resistant coating for electrochemical energy storage battery system — Technical requirements (30.60)
ISO/CD 26273, Non-metallic coatings--Measurement of thickness--Terahertz method (30.60)
ISO/CD 26342, Physical vapor deposition coatings — Magnetron sputtered silver and silver alloy coatings --specification and test methods (30.60)
ISO/CD 25249-1, Corrosion protection of offshore wind structures — Part 1: Design considerations (30.60)
ISO/CD 25249-2, Corrosion protection of offshore wind structures — Part 2: Primary steel components — general requirements for thermal spraying and painting (30.60)
ISO/CD 25249-3, Corrosion protection of offshore wind structures — Part 3: Primary steel components — Supplementary requirements for Foundations (30.60)
ISO/CD 25249-4, Corrosion protection of offshore wind structures — Part 4: Primary steel components — Supplementary requirements for Towers (30.60)
ISO/CD 25249-5, Corrosion protection of offshore wind structures — Part 5: Supplementary requirements for primary structural steel- and cast components for rotor nacelle assembly (30.60)
ISO/CD 26274, Specifications and requirements for laser cladding coatings on key components of thermal power generation equipment (30.20)
ISO/CD 25263, Classification and Specification of Thermal Spray Seal Coatings for Gas Turbines — Low-temperature Applications (30.20)
ISO/CD 25395, High Velocity Oxygen Fuel (HVOF) cermet coatings for battery pole piece rollers — Guidance with requirements (30.20)
ISO/CD 26712, Thermal barrier coating on additively manufactured nickel-based superalloy — performance requirements and test methods (30.20)
ISO/WD 26180, Vitreous and porcelain enamels--Determination of adhesion rate of electrostatic dry powder bisque coating (20.99)
ISO/WD 20010, Metallic and other inorganic coatings- Determination of volume fraction of monoclinic phase in yttria stabilized zirconia of thermal barrier coatings by X-ray diffractometry (20.60)
ISO/AWI 28706-6, Vitreous and porcelain enamels — Determination of resistance to chemical corrosion — Part 6: Determination of resistance to chemical corrosion by alkaline liquids using a cylindrical vessel with a volume surface ratio 3:1 cm (20.00)
ISO/AWI 24451, Carbon-based films — Rockwell indentation test to evaluate adhesion (20.00)
ISO/AWI 26417, Metallic and other inorganic coatings — Electrochemical passivation methods for stainless steel (20.00)
ISO/AWI 26588, Matte conversion coating for galvanized steel products — Technical requirements and test methods (20.00)
ISO/AWI 26737, Physical Vapor Deposition — Determination of erosion performance of PVD hard coatings by solid particles impingement method (20.00)
ISO/AWI 20511, Carbon based films — Determination of load carrying capacity of diamond-like carbon films by ball-on-disc reciprocating method accompanying with load increasing (20.00)
ISO/AWI 23131-1, Ellipsometry — Part 1: Principles (20.00)
ISO/AWI 23131-4, Ellipsometry — Part 4: Semi-transparent single layer model (20.00)
ISO/AWI 24251-2.2, Prevention of hydrogen assisted brittle fracture of high-strength steel components — Part 2: Test methods (10.99)
ISO/AWI 26930-1, Metallic and other inorganic coatings — Acceptance inspection of thermal spraying equipment — Part 1: General requirements (10.99)
ISO/AWI 26930-2, Metallic and other inorganic coatings — Acceptance inspection of thermal spraying equipment — Part 2: Flame spraying including HVOF (10.99)
ISO/AWI 26930-3, Metallic and other inorganic coatings — Acceptance inspection of thermal spraying equipment — Part 3: Arc spraying (10.99)
ISO/AWI 26930-4, Metallic and other inorganic coatings — Acceptance inspection of thermal spraying equipment — Part 4: Plasma spraying (10.99)
ISO/AWI 26930-5, Metallic and other inorganic coatings — Acceptance inspection of thermal spraying equipment — Part 5: Plasma spraying in chambers (10.99)
ISO/AWI 26930-6, Metallic and other inorganic coatings — Acceptance inspection of thermal spraying equipment — Part 6: Manipulator systems (10.99)
ISO/AWI 26930-7, Metallic and other inorganic coatings — Acceptance inspection of thermal spraying — Part 7: Powder feed systems (10.99)
prEN ISO 25249-1, Corrosion protection of offshore wind structures -- Part 1: Design considerations (10.99)
prEN ISO 25249-2, Corrosion protection of offshore wind structures — Part 2: Primary steel components — general requirements for thermal spraying and painting (10.99)
prEN ISO 25249-3, Corrosion protection of offshore wind structures — Part 3: Primary steel components — Supplementary requirements for Foundations (10.99)
prEN ISO 25249-4, Corrosion protection of offshore wind structures — Part 4: Primary steel components — Supplementary requirements for Towers (10.99)
prEN ISO 25249-5, Corrosion protection of offshore wind structures — Part 5: Supplementary requirements for primary structural steel- and cast components for rotor nacelle assembly (10.99)
prEN ISO 26273, Non-metallic coatings -- Measurement of thickness -- Terahertz method (10.99)
prEN ISO 8407 rev, Corrosion of metals and alloys — Removal of corrosion products from corrosion test specimens (10.99)
prEN ISO 16701 rev, Corrosion of metals and alloys — Corrosion in artificial atmosphere — Accelerated corrosion test involving exposure under controlled conditions of humidity cycling and intermittent spraying of a salt solution (10.99)
prEN ISO 23131-1, Ellipsometry — Part 1: Principles (10.99)
prEN ISO 11306 rev, Corrosion of metals and alloys — Guidelines for exposing and evaluating metals and alloys in surface sea water (10.99)
prEN ISO 11474 rev, Corrosion of metals and alloys — Corrosion tests in artificial atmosphere — Accelerated outdoor test by intermittent spraying of salt solution (Scab test) (10.99)
ISO/NP 26959, Atomic layer deposition based encapsulation coatings gas permeability test — Mass spectrometry method (10.60)
ISO/NP 26589.2, Metallic and other inorganic coatings — Ferroin method for testing passive film integrity of stainless steels (10.20)
ISO/NP 26849, Diamond composite coatings on agricultural tools — specifications and testing methods (10.20)
ISO/NP 27094, Metallic coatings ---- Aluminized coatings prepared via pack cementation and slurry processes ---- specifications and test methods (10.20)
ISO/NP 26070, Electrodeposited coatings and related finishes — Specification and requirements of corrosion resistant Zn-coating on Nd-Fe-B magnets (10.00)
