Standard Svensk standard · SS-EN 15446:2008

Flyktiga och diffusa utsläpp av gemensamt intresse för industrisektorer - Mätning av diffusa utsläpp av ångor genererade av utrustning och rörläckage

Status: Gällande

Köp denna standard

Standard Svensk standard · SS-EN 15446:2008

Flyktiga och diffusa utsläpp av gemensamt intresse för industrisektorer - Mätning av diffusa utsläpp av ångor genererade av utrustning och rörläckage
Prenumerera på standarden - Läs mer Dölj
Pris: 919 SEK
standard ikon pdf

PDF

Pris: 919 SEK
standard ikon

Papper

Pris: 1 470,40 SEK
standard ikon pdf + standard ikon

PDF + papper

Fler alternativ Färre alternativ
Omfattning
This standard applies to the measurement of fugitive emissions of volatile organic compounds (VOCs) from process equipment. The leak sources include, but are not limited to, valves, flanges and other connections, pressure relief devices, process drains, open-ended valves, pump and compressor seal systems, agitator seals, and access door seals. It does not apply to instrument tubing connections. This standard applies to all products of which at least 20 % by weight has a vapour pressure higher than 0,3 kPa at 20 °C. For the petroleum industry, this includes all light products and excludes kerosene and all heavier products. The standard is based on the measurement of the gas concentration at the interface of a leak. This concentration is measured with a portable instrument. It is converted to a mass emission rate by use of a set of correlations. The scope of this standard includes the complete data processing, from the initial concentration measurement up to the generation of an emission report over a reporting period (which is generally one year)1). This standard does not prescribe the number of potential emission points that should be screened each year nor the frequency at which these points should be screened. This sampling strategy shall indeed take into account the plant characteristics and the required level of control over fugitive emissions. Optical methods are currently under development to ease the detection of leaks in plants and use of this standard in conjunction with these methods might be possible. In any case, measurements have to be performed according to the requirements of this standard. To enable direct quantification of total fugitive emissions based only on these methods, a subsequent revision of this standard will be needed.

Ämnesområden

Utsläpp från stationära källor (13.040.40)


Köp denna standard

Standard Svensk standard · SS-EN 15446:2008

Flyktiga och diffusa utsläpp av gemensamt intresse för industrisektorer - Mätning av diffusa utsläpp av ångor genererade av utrustning och rörläckage
Prenumerera på standarden - Läs mer Dölj
Pris: 919 SEK
standard ikon pdf

PDF

Pris: 919 SEK
standard ikon

Papper

Pris: 1 470,40 SEK
standard ikon pdf + standard ikon

PDF + papper

Fler alternativ Färre alternativ

Produktinformation

Språk: Engelska

Framtagen av: Utsläpp, SIS/TK 423/AG 05

Internationell titel: Fugitive and diffuse emissions of common concern to industry sectors - Measurement of fugitive emission of vapours generating from equipment and piping leaks

Artikelnummer: STD-64928

Utgåva: 1

Fastställd: 2008-02-04

Antal sidor: 28