Standard Svensk standard · SS-EN 10149-2:2013

Varmvalsade platta produkter av höghållfast kallformningsstål - Del 2: Leveransbestämmelser för termomekaniskt valsat stål

Status: Gällande

Omfattning
This European Standard, in addition to EN 10149-1, specifies requirements for flat products made of weldable, hot-rolled, high yield strength steels for cold forming. The grades are given in Table 1 (chemical composition) and Table 2 (mechanical properties) and are supplied in the thermomechanically rolled delivery condition as given in 7.2. The steels specified in this European Standard are applicable to hot-rolled flat products in the thickness range of: - 1,5 mm to 20 mm for the steels which have a specified minimum yield strength of 315 MPa ) up to and including 460 MPa1); - 1,5 mm to 16 mm for the steels which have a specified minimum yield strength of 500 MPa1) up to and including 700 MPa1); and - from 2 mm up to 10 mm for the steels with a minimum yield stress in the range from 900 MPa1) to 960 MPa1).

Ämnesområden

Stål för värmebehandling (77.140.10) Platta stålprodukter och halvfabrikat (77.140.50)


Produktinformation

Språk: Svenska

Framtagen av: Konstruktionsstål, SIS/TK 142

Internationell titel: Hot rolled flat products made of high yield strength steels for cold forming - Part 2: Technical delivery conditions for thermomechanically rolled steels

Artikelnummer: STD-80014106

Utgåva: 2

Fastställd: 2013-09-30

Antal sidor: 20

Finns även på: SS-EN 10149-2:2013

Ersätter: SS-EN 10149-2