Standard Svensk standard · SS-ISO 10766:2006

Hydraulik - Cylindrar - Mått på spår för styrringar med rektangulärt tvärsnitt för kolvar och kolvstänger (ISO 10766:2006, IDT)

Status: Gällande

Omfattning
This International Standard specifies the preferred range of nominal dimensions and associated tolerances for a series of hydraulic cylinder piston and rod housings for rectangular-section-cut bearing rings, of the type shown in Clause 5, for applications in the following range of dimensions: -- for cylinders with bores of 16 mm to 500 mm, inclusive; -- for rods with diameters of 12 mm to 360 mm, inclusive. This International Standard does not give details of cut bearing ring design, because the manner of construction of cut bearing rings varies with each manufacturer. The design material of cut bearing rings and any incorporated anti-extrusion component are determined by conditions such as temperature and pressure.

Ämnesområden

Cylindrar


Produktinformation

Språk: Engelska

Framtagen av: Tätningselement, SIS/TK 104

Internationell titel: Hydraulic fluid power - Cylinders - Housing dimensions for rectangular-section-cut bearing rings for pistons and rods (ISO 10766:2006, IDT)

Artikelnummer: STD-44513

Utgåva: 2

Fastställd: 2006-02-03

Antal sidor: 12

Ersätter: SS-ISO 10766