ISO 17493:2016, Clothing and equipment for protection against heat — Test method for convective heat resistance using a hot air circulating oven (90.20)
ISO 3834-1:2021, Quality requirements for fusion welding of metallic materials — Part 1: Criteria for the selection of the appropriate level of quality requirements (90.20)
ISO 9151:2016, Protective clothing against heat and flame — Determination of heat transmission on exposure to flame (90.20)
SS 1983, Power sources for arc welding with consumable electrode wires (MIG/MAG processes) (90.20)
SS 2612, Welding equipment - Arc welding - Contact tips for MIG/MAG welding guns - Dimensions, material and marking (90.20)
SS 2630, Welding equipment - TIG Torches - Threads, dimensions and marking (90.20)
SS 68114, Resistance welding - Terminology (90.20)
EN 420:2003/FprA1, Protective gloves - General requirements and test methods (50.97)
EN 659:2003/prA1, Protective gloves for firefighters (50.97)
FprEN ISO 374-5, Protective gloves against dangerous chemicals and micro-organisms - Part 5: Terminology and performance requirements for micro-organisms risks (ISO/FDIS 374-5:2024) (50.60)
ISO/PRF 17779, Brazing — Specification and qualification of brazing procedures for metallic materials (50.20)
ISO/FDIS 13585, Brazing — Qualification testing of brazers and brazing operators (50.00)
ISO/FDIS 14460, Protective clothing for automobile racing drivers — Protection against heat and flame — Performance requirements and test methods (50.00)
ISO/FDIS 14918, Thermal spraying — Qualification testing of thermal sprayers (50.00)
ISO/FDIS 22161-3, Aerospace series — Brazing and high-temperature brazing of metallic components — Part 3: Furnace, torch and induction brazing using silver alloys (50.00)
ISO/PRF 11177, Vitreous and porcelain enamels — Inside and outside enamelled valves and pressure pipe fittings for untreated and potable water supply — Quality requirements and testing (50.00)
ISO/PRF 28706-2, Vitreous and porcelain enamels — Determination of resistance to chemical corrosion — Part 2: Determination of resistance to chemical corrosion by boiling acids, boiling neutral liquids, alkaline liquids and/or their vapours (50.00)
ISO/PRF 4531, Vitreous and porcelain enamels — Release from enamelled articles in contact with food — Methods of test and limits (50.00)
prEN ISO 14918, Thermal spraying - Qualification testing of thermal sprayers (ISO/DIS 14918:2025) (45.99)
ISO/DIS 15614-1, Specification and qualification of welding procedures for metallic materials — Welding procedure test — Part 1: Arc and gas welding of steels and arc welding of nickel and nickel alloys (40.99)
ISO/DIS 16602-1, Protective clothing for protection against chemicals — Classification, labelling and performance requirements — Part 1: General requirements (40.99)
ISO/DIS 16602-2, Protective clothing for protection against chemicals — Classification, labelling and performance requirements — Part 2: Physical test methods, classification and requirements (40.99)
ISO/DIS 16602-3, Protective clothing for protection against chemicals — Classification, labelling and performance requirements — Part 3: Chemical test methods, classification and requirements (40.99)
ISO/DIS 16602-4, Protective clothing for protection against chemicals — Classification, labelling and performance requirements — Part 4: Test methods, classification and requirements for specific designs and ensemble components including gloves, footwear, and respirators (40.99)
ISO/DIS 16602-5, Protective clothing for protection against chemicals — Classification, labelling and performance requirements — Part 5: Garment test methods, classification and requirements (40.99)
ISO/DIS 16602-6, Protective clothing for protection against chemicals — Classification, labelling and performance requirements — Part 6: Guidance for Selection, Use, Care and Maintenance (40.99)
ISO/DIS 17660-1, Welding and allied processes — Welding of reinforcing steel — Part 1: Load-bearing welded joints (40.99)
ISO/DIS 17660-2, Welding and allied processes — Welding of reinforcing steel — Part 2: Non-load-bearing welded joints (40.99)
ISO/DIS 22610, Protective clothing, surgical drapes, gowns and clean air suits — Test method to determine the resistance to wet bacterial penetration (40.99)
ISO/DIS 27065, Protective clothing — Performance requirements for protective garments worn by operators applying pesticides and for re-entry workers (40.99)
EN 388:2016/prA1:2018, Protective gloves against mechanical risks (40.97)
prEN ISO 17660, Welding - Welding of reinforcing steel (ISO/DIS 17660:2003) (40.97)
ISO/DIS 17846, Welding and allied processes — Health and safety — Wordless product safety labels for equipment and consumables used in arc welding and cutting (40.60)
ISO/DIS 20384, Surgical clothing and drapes — Requirements and test methods (40.60)
ISO/DIS 20471, Protective clothing — High visibility warning clothing for high risk situations — Test methods and requirements (40.60)
ISO/DIS 22615, Protective clothing — Performance requirements and test methods for protective clothing against infective agents (40.60)
ISO/DIS 2553, Welding and allied processes — Symbols for welding — Welded joints (40.60)
ISO/DIS 9606.2, Qualification testing of welders — Fusion welding (40.60)
prEN 14532-1, Welding consumables - Test methods and quality requirements - Part 1: Primary methods and assessment of consumables for steel, nickel and nickel alloys (40.60)
prEN 18354, Welding consumables — Testing of welding consumables by means of weld metal specimens — Test piece for determining the hardness of surfacing (40.60)
prEN ISO 13585, Brazing - Qualification testing of brazers and brazing operators (ISO/DIS 13585:2026) (40.60)
prEN ISO 15614-1, Specification and qualification of welding procedures for metallic materials - Welding procedure test - Part 1: Arc and gas welding of steels and arc welding of nickel and nickel alloys (ISO/DIS 15614-1:2025) (40.60)
prEN ISO 17660-1, Welding and allied processes - Welding of reinforcing steel - Part 1: Load-bearing welded joints (ISO/DIS 17660-1:2026) (40.60)
prEN ISO 17660-2, Welding and allied processes - Welding of reinforcing steel - Part 2: Non-load-bearing welded joints (ISO/DIS 17660-2:2026) (40.60)
prEN ISO 2553, Welding and allied processes - Symbols for welding - Welded joints (ISO/DIS 2553:2026) (40.60)
prEN ISO 9606, Qualification testing of welders - Fusion welding (ISO/DIS 9606:2026) (40.60)
ISO/DIS 14114, Gas welding equipment — Acetylene manifold systems for welding, cutting and allied processes — General requirements (40.20)
ISO/DIS 18889, Protective gloves for pesticide operators and re-entry workers — Performance requirements (40.20)
prEN ISO 11666, Non-destructive testing of welds - Ultrasonic testing - Acceptance levels (ISO/DIS 11666:2026) (40.20)
prEN ISO 14114, Gas welding equipment - Acetylene manifold systems for welding, cutting and allied processes - General requirements (ISO/DIS 14114:2026) (40.20)
prEN ISO 17640, Non-destructive testing of welds - Ultrasonic testing - Techniques, testing levels, and assessment (ISO/DIS 17640:2026) (40.20)
prEN ISO 18889, Protective gloves for pesticide operators and re-entry workers - Performance requirements (ISO/DIS 18889:2026) (40.20)
prEN ISO 20601, Non-destructive testing of welds - Ultrasonic testing - Phased array technique for thin-walled steel components (ISO/DIS 20601:2026) (40.20)
prEN ISO 23279, Non-destructive testing of welds - Ultrasonic testing - Characterization of discontinuities in welds (ISO/DIS 23279:2026) (40.20)
prEN ISO 9455-8, Soft soldering fluxes - Test methods - Part 8: Determination of zinc content (ISO/FDIS 9455-8:2026) (40.20)
prEN ISO 22688, Brazing - Quality requirements for brazing of metallic materials (ISO 22688:2020) (40.10)
ISO/DIS 17632, Welding consumables — Tubular cored electrodes for gas shielded and non-gas shielded metal arc welding of non-alloy and fine grain steels — Classification (40.00)
ISO/DIS 3821, Gas welding equipment — Rubber hoses for welding, cutting and allied processes (40.00)
ISO 13506-1:2024/CD Amd 1, Protective clothing against heat and flame — Part 1: Test method for complete garments — Measurement of transferred energy using an instrumented manikin — Amendment 1 (30.99)
ISO 13997:2024/CD Amd 1, Protective clothing — Mechanical properties — Determination of resistance to cutting by sharp objects — Amendment 1 (30.99)
ISO/CD 11611, Protective clothing for use in welding and allied processes (30.99)
ISO/CD 17491-3, Protective clothing — Test methods for clothing providing protection against chemicals — Part 3: Determination of resistance to penetration by a jet of liquid (jet test) (30.99)
ISO/CD 17492, Clothing for protection against heat and flame — Determination of heat transmission on exposure to both flame and radiant heat (30.99)
ISO/CD 23388, Protective gloves against mechanical risks (30.99)
ISO/CD 23762, Protective clothing — Enhanced visibility warning clothing for medium risk situations — Test methods and requirements (30.99)
ISO/CD 25491, Laser surface treatment and related coatings — Terminology, Classification (30.99)
ISO/CD 374-4, Protective gloves against dangerous chemicals and micro-organisms — Part 4: Determination of resistance to degradation by chemicals (30.99)
prEN ISO 17632 rev, Welding consumables — Tubular cored electrodes for gas shielded and non-gas shielded metal arc welding of non-alloy and fine grain steels — Classification (30.99)
prEN ISO 3821 rev, Gas welding equipment — Rubber hoses for welding, cutting and allied processes (30.99)
ISO/CD 13994, Clothing for protection against liquid chemicals — Determination of the resistance of protective clothing materials to penetration by liquids under pressure (30.60)
ISO/CD 14113, Gas welding equipment — Rubber and plastics hose and hose assemblies for use with industrial gases up to 450 bar (45 MPa) (30.60)
ISO/CD 15614-15, Specification and qualification of welding procedures for metallic materials — Welding procedure test — Part 15: Manufacturing material using wire with direct energy (30.60)
ISO/CD 17634, Welding consumables — Tubular cored electrodes for gas shielded metal arc welding of creep-resisting steels — Classification (30.60)
ISO/CD 25249-2, Corrosion protection of offshore wind structures — Part 2: Primary steel components — general requirements for thermal spraying and painting (30.60)
ISO/CD 25976, Metallic coatings — Technical requirements and testing of metallic laser cladding coatings (30.60)
ISO/CD 26181, Heat-resistant coating for electrochemical energy storage battery system — Technical requirements (30.60)
ISO/CD 26273, Non-metallic coatings--Measurement of thickness--Terahertz method (30.60)
ISO/CD 6530, Protective clothing — Protection against liquid chemicals — Test method for resistance of materials to penetration by liquids (30.60)
ISO/CD 14171, Welding consumables — Solid wire electrodes, tubular cored electrodes and electrode/flux combinations for submerged arc welding of non alloy and fine grain steels — Classification (30.20)
ISO/CD 25892, Powder coating by atomic layer deposition — Specification and test methods (30.20)
ISO/WD 20010, Metallic and other inorganic coatings- Determination of volume fraction of monoclinic phase in yttria stabilized zirconia of thermal barrier coatings by X-ray diffractometry (20.60)
ISO/WD 25263, Classification and Specification of Thermal Spray Seal Coatings for Gas Turbines — Low-temperature Applications (20.60)
ISO/WD 26180, Vitreous and porcelain enamels--Determination of adhesion rate of electrostatic dry powder bisque coating (20.60)
ISO/WD 26274, Specifications and requirements for laser cladding coatings on key components of thermal power generation equipment (20.60)
ISO/WD 26712, Thermal barrier coating on additively manufactured nickel-based superalloy — performance requirements and test methods (20.20)
ISO/AWI 23131-4, Ellipsometry — Part 4: Semi-transparent single layer model (20.00)
ISO/AWI 28706-6, Vitreous and porcelain enamels — Determination of resistance to chemical corrosion — Part 6: Determination of resistance to chemical corrosion by alkaline liquids using a cylindrical vessel with a volume surface ratio 3:1 cm (20.00)
ISO/AWI TR 19382, Protective clothing - Approaches of human validation for comfort evaluation during practical performance tests (20.00)
