Standardization · SIS/TK 134

Svetsteknik

Svetsade konstruktioner ser vi överallt i vardagen, i byggnader, broar, fordon och rörledningar med mera. Bristande kvalitet i svetsningsarbetet kostar pengar genom reparationer. De samhälleliga konsekvenserna kan vara ännu allvarligare i form av personskador, havererad infrastruktur eller samhällsservice. Kommittén skapar förutsättningar för kvalitetssäkring vid svetsning.

Kommittén är ett forum för experter inom svetsning. De är med och aktivt påverkar innehåll och riktlinjer för framtida standarder, både globalt och nationellt. Standarderna syftar till att säkerställa kvaliteten i svetsade konstruktioner. Standarderna omfattar svetsarens kompetens genom svetsarprövning och metoder att säkerställa kvaliteten i svetsningsförfarandet genom procedurkontroll. Andra standarder säkerställer att svetsutrustningen har rätt prestanda och arbetsmiljö vid svetsningsarbetet. För konstruktörer finns standard med kvalitetsklasser. En standardserie för kvalitetssäkring vid svetsning tar ett helhetsgrepp och beskriver hur man bygger ett kvalitetsledningssystem för svetsning. Det skapar förutsättningar för rätt kvalitet vid svetsning, säkra anläggningar och lägre underhållskostnader.

Påverka nationellt och internationellt

Kommittén samlar experter för svenskt agerande i den internationella standardiseringen. Vi samarbetar med Svetskommissionen och medverkar aktivt i både europeisk standardisering inom CEN och globalt inom ISO. Vi kan driva utvecklingen av standarderna så att de främjar svenska intressen. Gemensamma standarder är viktiga för att säkerställa säkra anläggningar med jämförbar kvalitet oberoende av ingående komponenters ursprung. Det innebär samtidigt likartade konkurrensvillkor för producenter i olika länder.

Ett värdefullt arbete

I kommittén samlas expertkunskap genom representanter från materialtillverkare, ackrediterade kontrollorgan, provningslaboratorier, anläggningsägare och myndigheter. Arbetet är indelat i arbetsgrupper med specifika arbetsområden. Experter från Svetskommissionen leder arbetsgrupperna. Genom att medverka får deltagarna djupare insikt om den tekniska utvecklingen inom området, standardernas krav och deras tillämpning. Deltagarna är samtidigt med och påverkar framtidens standarder, vilket också leder till nya insikter.

More information about the committèes work:

Now working on 100 standards
FprEN ISO 374-5, Protective gloves against dangerous chemicals and micro-organisms - Part 5: Terminology and performance requirements for micro-organisms risks (ISO/FDIS 374-5:2024) (50.60)
ISO/FDIS 22161-3, Aerospace series — Brazing and high-temperature brazing of metallic components — Part 3: Furnace, torch and induction brazing using silver alloys (50.20)
ISO/FDIS 11612, Protective clothing — Clothing to protect against heat and flame — Minimum performance requirements (50.00)
ISO/FDIS 13585, Brazing — Qualification testing of brazers and brazing operators (50.00)
ISO/FDIS 14116, Protective clothing — Protection against flame — Limited flame spread materials, material assemblies and clothing (50.00)
ISO/FDIS 14460, Protective clothing for automobile racing drivers — Protection against heat and flame — Performance requirements and test methods (50.00)
ISO/FDIS 14918, Thermal spraying — Qualification testing of thermal sprayers (50.00)
ISO/FDIS 22610, Protective clothing, surgical drapes, gowns and clean air suits — Test method to determine the resistance to wet bacterial penetration (50.00)
ISO/FDIS 27065, Protective clothing — Performance requirements for protective garments worn by operators applying pesticides and for re-entry workers (50.00)
ISO/PRF 11177, Vitreous and porcelain enamels — Inside and outside enamelled valves and pressure pipe fittings for untreated and potable water supply — Quality requirements and testing (50.00)
ISO/PRF 28706-2, Vitreous and porcelain enamels — Determination of resistance to chemical corrosion — Part 2: Determination of resistance to chemical corrosion by boiling acids, boiling neutral liquids, alkaline liquids and/or their vapours (50.00)
ISO/PRF 4531, Vitreous and porcelain enamels — Release from enamelled articles in contact with food — Methods of test and limits (50.00)
FprEN 659, Protective gloves for firefighters (45.99)
ISO/DIS 15614-1, Specification and qualification of welding procedures for metallic materials — Welding procedure test — Part 1: Arc and gas welding of steels and arc welding of nickel and nickel alloys (40.99)
ISO/DIS 16602-1, Protective clothing for protection against chemicals — Classification, labelling and performance requirements — Part 1: General requirements (40.99)
ISO/DIS 16602-2, Protective clothing for protection against chemicals — Classification, labelling and performance requirements — Part 2: Physical test methods, classification and requirements (40.99)
ISO/DIS 16602-3, Protective clothing for protection against chemicals — Classification, labelling and performance requirements — Part 3: Chemical test methods, classification and requirements (40.99)
ISO/DIS 16602-4, Protective clothing for protection against chemicals — Classification, labelling and performance requirements — Part 4: Test methods, classification and requirements for specific designs and ensemble components including gloves, footwear, and respirators (40.99)
ISO/DIS 16602-5, Protective clothing for protection against chemicals — Classification, labelling and performance requirements — Part 5: Garment test methods, classification and requirements (40.99)
ISO/DIS 16602-6, Protective clothing for protection against chemicals — Classification, labelling and performance requirements — Part 6: Guidance for Selection, Use, Care and Maintenance (40.99)
ISO/DIS 17660-1, Welding and allied processes — Welding of reinforcing steel — Part 1: Load-bearing welded joints (40.99)
ISO/DIS 17660-2, Welding and allied processes — Welding of reinforcing steel — Part 2: Non-load-bearing welded joints (40.99)
ISO/DIS 5172, Gas welding equipment — Blowpipes for gas welding, heating and cutting — Specifications and tests (40.99)
EN 407:2020/prA1, Protective gloves and other hand protective equipments against thermal risks (heat and/or fire) (40.60)
ISO/DIS 17846, Welding and allied processes — Health and safety — Wordless product safety labels for equipment and consumables used in arc welding and cutting (40.60)
ISO/DIS 20384, Surgical clothing and drapes — Requirements and test methods (40.60)
ISO/DIS 20471, Protective clothing — High visibility warning clothing for high risk situations — Test methods and requirements (40.60)
ISO/DIS 22615, Protective clothing — Performance requirements and test methods for protective clothing against infective agents (40.60)
ISO/DIS 2553, Welding and allied processes — Symbols for welding — Welded joints (40.60)
ISO/DIS 9606.2, Qualification testing of welders — Fusion welding (40.60)
prEN 12477, Protective gloves for welders (40.60)
prEN 14532-1, Welding consumables - Test methods and quality requirements - Part 1: Primary methods and assessment of consumables for steel, nickel and nickel alloys (40.60)
prEN 18354, Welding consumables — Testing of welding consumables by means of weld metal specimens — Test piece for determining the hardness of surfacing (40.60)
prEN ISO 13585, Brazing - Qualification testing of brazers and brazing operators (ISO/DIS 13585:2026) (40.60)
ISO/DIS 14114, Gas welding equipment — Acetylene manifold systems for welding, cutting and allied processes — General requirements (40.20)
ISO/DIS 18889, Protective gloves for pesticide operators and re-entry workers — Performance requirements (40.20)
ISO/DIS 3821, Gas welding equipment — Rubber hoses for welding, cutting and allied processes (40.20)
prEN ISO 11666, Non-destructive testing of welds — Ultrasonic testing — Acceptance levels (40.20)
ISO/DIS 17632, Welding consumables — Tubular cored electrodes for gas shielded and non-gas shielded metal arc welding of non-alloy and fine grain steels — Classification (40.00)
ISO/DIS 6530, Protective clothing — Protection against liquid chemicals — Test method for resistance of materials to penetration by liquids (40.00)
ISO 13506-1:2024/CD Amd 1, Protective clothing against heat and flame — Part 1: Test method for complete garments — Measurement of transferred energy using an instrumented manikin — Amendment 1 (30.99)
ISO 13997:2024/CD Amd 1, Protective clothing — Mechanical properties — Determination of resistance to cutting by sharp objects — Amendment 1 (30.99)
ISO/CD 11611, Protective clothing for use in welding and allied processes (30.99)
ISO/CD 13918.2, Welding — Studs and ceramic ferrules for arc stud welding (30.99)
ISO/CD 14113, Gas welding equipment — Rubber and plastics hose and hose assemblies for use with industrial gases up to 45 MPa (450 bar) (30.99)
ISO/CD 15614-15, Specification and qualification of welding procedures for metallic materials — Welding procedure test — Part 15: Manufacturing material using wire with direct energy (30.99)
ISO/CD 17491-3, Protective clothing — Test methods for clothing providing protection against chemicals — Part 3: Determination of resistance to penetration by a jet of liquid (jet test) (30.99)
ISO/CD 17492, Clothing for protection against heat and flame — Determination of heat transmission on exposure to both flame and radiant heat (30.99)
ISO/CD 22073-2, Gas welding equipment — Part 2: Tapping point containing line pressure regulators or line pressure regulators with flow metering devices for gas distribution used in welding, cutting and allied processes up to 6 MPa (60 bar) (30.99)
ISO/CD 23388, Protective gloves against mechanical risks (30.99)
ISO/CD 23762, Protective clothing — Enhanced visibility warning clothing for medium risk situations — Test methods and requirements (30.99)
ISO/CD 25491, Laser surface treatment and related coatings — Terminology, Classification (30.99)
ISO/CD 374-4, Protective gloves against dangerous chemicals and micro-organisms — Part 4: Determination of resistance to degradation by chemicals (30.99)
ISO/CD 13994, Clothing for protection against liquid chemicals — Determination of the resistance of protective clothing materials to penetration by liquids under pressure (30.60)
ISO/CD 17634, Welding consumables — Tubular cored electrodes for gas shielded metal arc welding of creep-resisting steels — Classification (30.60)
ISO/CD 25249-2, Corrosion protection of offshore wind structures — Part 2: Primary steel components — general requirements for thermal spraying and painting (30.60)
ISO/CD 25976, Metallic coatings — Technical requirements and testing of metallic laser cladding coatings (30.60)
ISO/CD 26181, Heat-resistant coating for electrochemical energy storage battery system — Technical requirements (30.60)
ISO/CD 26273, Non-metallic coatings--Measurement of thickness--Terahertz method (30.60)
ISO/CD 14171, Welding consumables — Solid wire electrodes, tubular cored electrodes and electrode/flux combinations for submerged arc welding of non alloy and fine grain steels — Classification (30.20)
ISO/CD 25263, Classification and Specification of Thermal Spray Seal Coatings for Gas Turbines — Low-temperature Applications (30.20)
ISO/CD 25892, Powder coating by atomic layer deposition — Specification and test methods (30.20)
ISO/CD 26274, Specifications and requirements for laser cladding coatings on key components of thermal power generation equipment (30.20)
ISO/WD 26180, Vitreous and porcelain enamels--Determination of adhesion rate of electrostatic dry powder bisque coating (20.99)
ISO/WD 26712, Thermal barrier coating on additively manufactured nickel-based superalloy — performance requirements and test methods (20.99)
ISO/WD 20010, Metallic and other inorganic coatings- Determination of volume fraction of monoclinic phase in yttria stabilized zirconia of thermal barrier coatings by X-ray diffractometry (20.60)
ISO/AWI 17636-2, Non-destructive testing of welds — Radiographic testing — Part 2: X- and gamma-ray techniques with digital detectors (20.00)
ISO/AWI 23131-1, Ellipsometry — Part 1: Principles (20.00)
ISO/AWI 23131-4, Ellipsometry — Part 4: Semi-transparent single layer model (20.00)
ISO/AWI 25901-4, Welding and allied processes — Vocabulary — Part 4: Arc welding (20.00)
ISO/AWI 28706-6, Vitreous and porcelain enamels — Determination of resistance to chemical corrosion — Part 6: Determination of resistance to chemical corrosion by alkaline liquids using a cylindrical vessel with a volume surface ratio 3:1 cm (20.00)
ISO/AWI TR 19382, Protective clothing - Approaches of human validation for comfort evaluation during practical performance tests (20.00)
EN ISO 13997:2024/prA1, Protective clothing — Mechanical properties — Determination of resistance to cutting by sharp objects — Amendment 1 (10.99)
ISO/AWI 10863, Non-destructive testing of welds — Ultrasonic testing — Use of time-of-flight diffraction technique (TOFD) (10.99)
ISO/AWI 21904-1, Health and safety in welding and allied processes — Equipment for capture and separation of welding fume — Part 1: General requirements (10.99)
ISO/AWI 21904-2, Health and safety in welding and allied processes — Equipment for capture and separation of welding fume — Part 2: Requirements for testing and marking of separation efficiency (10.99)
ISO/AWI 21904-4, Health and safety in welding and allied processes — Equipment for capture and separation of welding fume — Part 4: Determination of the minimum air volume flow rate of capture devices (10.99)
prEN 13479 rev, Welding consumables - General product standard for filler metals and fluxes for fusion welding of metallic materials (10.99)
prEN 1395-1 rev, Thermal spraying - Acceptance inspection of thermal spraying equipment - Part 1: General requirements (10.99)
prEN 1395-2 rev, Thermal spraying - Acceptance inspection of thermal spraying equipment - Part 2: Flame spraying including HVOF (10.99)
prEN 1395-3 rev, Thermal spraying - Acceptance inspection of thermal spraying equipment - Part 3: Arc spraying (10.99)
prEN 1395-4 rev, Thermal spraying - Acceptance inspection of thermal spraying equipment - Part 4: Plasma spraying (10.99)
prEN 1395-5 rev, Thermal spraying - Acceptance inspection of thermal spraying equipment - Part 5: Plasma spraying in chambers (10.99)
prEN 1395-6 rev, Thermal spraying - Acceptance inspection of thermal spraying equipment - Part 6: Manipulator systems (10.99)
prEN 1395-7 rev, Thermal spraying - Acceptance inspection of thermal spraying equipment - Part 7: Powder feed systems (10.99)
prEN 15340 rev, Thermal spraying - Determination of shear load resistance of thermally sprayed coatings (10.99)
prEN 17002 rev, Thermal spraying - Components with thermally sprayed coatings - Thermal spray procedure specification (10.99)
prEN ISO 10863 rev, Non-destructive testing of welds — Ultrasonic testing — Use of time-of-flight diffraction technique (TOFD) (10.99)
prEN ISO 13588 rev, Non-destructive testing of welds — Ultrasonic testing — Use of automated phased array technology (10.99)
ISO/NP 17927-1, Fusion welding of metallic components — Part 1: Process specification (10.20)
ISO/NP 26849, Diamond composite coatings on agricultural tools — specifications and testing methods (10.20)
ISO/NP 26930-1, Metallic and other inorganic coatings — Acceptance inspection of thermal spraying equipment — Part 1: General requirements (10.20)
ISO/NP 26930-2, Metallic and other inorganic coatings — Acceptance inspection of thermal spraying equipment — Part 2: Flame spraying including HVOF (10.20)
ISO/NP 26930-3, Metallic and other inorganic coatings — Acceptance inspection of thermal spraying equipment — Part 3: Arc spraying (10.20)
ISO/NP 26930-4, Metallic and other inorganic coatings — Acceptance inspection of thermal spraying equipment — Part 4: Plasma spraying (10.20)
ISO/NP 26930-5, Metallic and other inorganic coatings — Acceptance inspection of thermal spraying equipment — Part 5: Plasma spraying in chambers (10.20)
ISO/NP 26930-6, Metallic and other inorganic coatings — Acceptance inspection of thermal spraying equipment — Part 6: Manipulator systems (10.20)
ISO/NP 26930-7, Metallic and other inorganic coatings — Acceptance inspection of thermal spraying — Part 7: Powder feed systems (10.20)
ISO/NP 26959, Atomic layer deposition based encapsulation coatings gas permeability test — Mass spectrometry method (10.20)
ISO/NP 27094, Metallic coatings ---- Aluminized coatings prepared via pack cementation and slurry processes ---- specifications and test methods (10.20)
Show more Show less
Published 362 standards
standard ikon pdf
SS-EN ISO 18491:2026
Welding and allied processes — Measurement of arc energies (ISO 18491:2026, IDT)
Language:
standard ikon pdf
SS-EN ISO 18275:2026
Welding consumables — Covered electrodes for manual metal arc welding of high-strength steels — Classification (ISO 18275:2026, IDT)
Language:
standard ikon pdf
SS-EN 17931:2026
Gas welding equipment — Manual gas equipment for welding, heating and cutting — Periodic inspection
Language:
standard ikon pdf
SS-EN ISO 18166:2026
Numerical welding simulation — Execution and documentation (ISO 18166:2026, IDT)
Language:
standard ikon pdf
SS-EN ISO 15614-11:2025
Specification and qualification of welding procedures for metallic materials — Welding procedure test — Part 11: Electron and laser beam welding (ISO 15614-11:2025, IDT)
Language:
standard ikon pdf
SS-EN ISO 15614-9:2025
Specification and qualification of welding procedures for metallic materials — Welding procedure test — Part 9: Underwater hyperbaric wet welding (ISO 15614-9:2025, IDT)
Language:
standard ikon pdf
SS-EN ISO 15608:2025
Welding — Grouping system for metallic material (ISO 15608:2025, IDT)
Language:
standard ikon pdf
SS-EN ISO 17779:2025
Brazing — Specification and qualification of brazing procedures for metallic materials (ISO 17779:2021, IDT)
Language:
standard ikon pdf
SS-EN ISO 15613:2025
Specification and qualification of welding procedures for metallic materials — Qualification based on pre-production welding test (ISO 15613:2025, IDT)
Language:
standard ikon pdf
SS-EN ISO 14732:2025
Welding personnel — Qualification testing of welding operators and weld setters for mechanized and automatic welding of metallic materials (ISO 14732:2025, IDT)
Language:
standard ikon pdf
SS-EN ISO 15614-2:2025
Specification and qualification of welding procedures for metallic materials — Welding procedure test – Part 2: Arc welding of aluminium and its alloys (ISO 15614-2:2025, IDT)
Language:
standard ikon pdf
SS-EN ISO 17662:2025
Welding — Calibration, verification and validation of equipment used for welding, including ancillary activities (ISO 17662:2025, IDT)
Language:
standard ikon pdf
SS-EN ISO 13916:2025
Welding — Measurement of preheating temperature, interpass temperature and preheat maintenance temperature (ISO 13916:2025, IDT)
Language:
standard ikon pdf
SS-EN ISO 14555:2025
Welding — Arc stud welding of metallic materials (ISO 14555:2025, IDT)
Language:
standard ikon pdf
SS-EN ISO 16834:2025
Welding consumables - Wire electrodes, wires, rods and deposits for gas shielded arc welding of high strength steels - Classification (ISO 16834:2025, IDT)
Language:
standard ikon pdf
SS-EN ISO 21952:2025
Welding consumables — Wire electrodes, wires, rods and deposits for gas shielded arc welding of creep-resisting steels — Classification
Language:
standard ikon pdf
SS-EN ISO 17633:2025
Welding consumables — Tubular cored electrodes and rods for gas shielded and non-gas shielded metal arc welding of stainless and heat-resisting steels — Classification
Language:
standard ikon pdf
SS-EN ISO 26304:2025
Welding consumables — Solid wire electrodes, tubular cored electrodes and electrode-flux combinations for submerged arc welding of high strength steels — Classification (ISO 26304:2025, IDT)
Language:
standard ikon pdf
SS-EN ISO 5821:2025
Resistance welding — Spot welding electrode caps (ISO/DIS 5821:2024, IDT)
Language:
standard ikon pdf
SS-EN ISO 14343:2025
Welding consumables — Wire electrodes, strip electrodes, wires and rods for arc welding of stainless and heat resisting steels — Classification (ISO 14343:2025, IDT)
Language:
standard ikon pdf
SS-EN 18007-2:2024
Electromagnetic pulse welding — Part 2: Design of welded joints
Language:
standard ikon pdf
SS-EN 18007-5:2024
Electromagnetic pulse welding — Part 5: Quality and inspection requirements
Language:
standard ikon pdf
SS-EN 18007-4:2024
Electromagnetic pulse welding — Part 4: Specification and qualification of welding procedures
Language:
standard ikon pdf
SS-EN 18007-3:2024
Electromagnetic pulse welding — Part 3: Qualification of welding operators and weld setters
Language:
standard ikon pdf
SS-EN 18007-1:2024
Electromagnetic pulse welding — Part 1: Welding knowledge, terminology and vocabulary
Language:
standard ikon pdf
SS-EN 15520:2024
Thermal spraying — Recommendations for constructional design of components with thermally sprayed coatings
Language:
standard ikon pdf
SS-EN ISO 7287:2002/A1:2024
Graphical symbols for thermal cutting equipment — Amendment 1 (ISO 7287:2002/Amd1:2024, IDT)
Language:
standard ikon pdf
SS-EN ISO 636:2024
Welding consumables — Rods, wires and deposits for tungsten inert gas welding of non-alloy and fine-grain steels — Classification (ISO 636:2024, IDT)
Language:
standard ikon pdf
SS-EN ISO 9013:2017/A1:2024
Thermal cutting — Classification of thermal cuts — Geometrical product specification and quality tolerances — Amendment 1 (ISO 9013:2017/Amd 1:2024, IDT)
Language:
standard ikon pdf
SS-EN ISO 9013:2017/A1:2024
Thermal cutting — Classification of thermal cuts — Geometrical product specification and quality tolerances — Amendment 1 (ISO 9013:2017/Amd 1:2024, IDT)
Language:
standard ikon pdf
SS-EN ISO 14344:2024
Welding consumables — Procurement of filler materials and fluxes (ISO 14344:2024, IDT)
Language:
standard ikon pdf
SS-EN ISO 544:2024
Welding consumables — Technical delivery conditions for filler materials and fluxes — Type of product, dimensions, tolerances and markings (ISO 544:2024, IDT)
Language:
standard ikon pdf
SS-EN 17942:2024
Gas welding equipment — Safety requirements for thermoprocess equipment with open firing oxy-fuel gas welding equipment
Language:
standard ikon pdf
SS-EN ISO 15614-5:2024
Specification and qualification of welding procedures for metallic materials — Welding procedure test — Part 5: Arc welding of titanium, zirconium and their alloys (ISO 15614-5:2024, IDT)
Language:
standard ikon pdf
SS-EN ISO 18276:2024
Welding consumables — Tubular cored electrodes for gas-shielded and non-gas-shielded metal arc welding of high strength steels — Classification (ISO 18276:2024, IDT)
Language:
standard ikon pdf
SS-EN ISO 13585:2024
Brazing — Qualification testing of brazers and brazing operators (ISO 13585:2021, IDT)
Language:
standard ikon pdf
SS-EN 14717:2024
Welding and allied processes — Environmental check list
Language:
standard ikon pdf
SS-EN ISO 12224-1:2024
Solder wire, solid and flux cored — Specification and test methods — Part 1: Classification and performance requirements (ISO 12224-1:2024, IDT)
Language:
standard ikon pdf
SS-EN ISO 12224-2:2024
Flux cored solder wire — Specification and test methods — Part 2: Determination of flux content (ISO 12224-2:2024, IDT)
Language:
standard ikon pdf
SS-EN ISO 3677:2024
Filler metal for brazing — Designation (ISO 3677:2023, IDT)
Language:
standard ikon pdf
SS-EN ISO 17672:2024
Brazing — Filler metals (ISO 17672:2023, IDT)
Language:
standard ikon pdf
SS-EN ISO 10882-1:2024
Health and safety in welding and allied processes — Sampling of airborne particles and gases in the operator's breathing zone — Part 1: Sampling of airborne particles (ISO 10882-1:2024, IDT)
Language:
standard ikon pdf
SS-EN ISO 10882-2:2024
Health and safety in welding and allied processes — Sampling of airborne particles and gases in the operator's breathing zone — Part 2: Sampling of gases (ISO 10882-2:2023, IDT)
Language:
standard ikon pdf
SS-EN ISO 9692-2:2024
Welding and allied processes — Joint preparation — Part 2: Submerged arc welding of steels (ISO 9692-2:2024, IDT)
Language:
standard ikon pdf
SS-EN ISO 14373:2024
Resistance welding - Procedure for spot welding of uncoated and coated low carbon steels (ISO 14373:2024, IDT)
Language:
standard ikon pdf
SS-EN ISO 15610:2024
Specification and qualification of welding procedures for metallic materials — Qualification based on tested welding consumables (ISO 15610:2024, IDT) (ISO 15610:2024, IDT)
Language:
standard ikon pdf
SS-EN ISO 9455-17:2024
Soft soldering fluxes — Test methods — Part 17: Surface insulation resistance comb test and electrochemical migration test of flux residues (ISO 9455-17:2023, IDT)
Language:
standard ikon pdf
SS-EN ISO 15610:2024
Specification and qualification of welding procedures for metallic materials — Qualification based on tested welding consumables (ISO 15610:2024, IDT)
Language:
standard ikon pdf
SS-EN ISO 3834-6:2024
Quality requirements for fusion welding of metallic materials — Part 6: Guidelines on implementing ISO 3834 series (ISO 3834-6:2024, IDT)
Language:
standard ikon pdf
SS-EN ISO 15611:2024
Specification and qualification of welding procedures for metallic materials — Qualification based on previous welding experience (ISO 15611:2024, IDT)
Language:
standard ikon pdf
SS-EN ISO 15611:2024
Specification and qualification of welding procedures for metallic materials — Qualification based on previous welding experience (ISO 15611:2024, IDT) (ISO 15611:2024, IDT)
Language:
standard ikon pdf
SS-EN ISO 18279:2024
Brazing — Imperfections in brazed joints (ISO 18279:2022, IDT)
Language:
standard ikon pdf
SS-EN ISO 15614-13:2024
Specification and qualification of welding procedures for metallic materials — Welding procedure test — Part 13: Upset (resistance butt) and flash welding (ISO 15614-13:2023, IDT)
Language:
standard ikon pdf
SS-EN ISO 14919:2023
Thermal spraying - Wires, rods and cords for flame and arc spraying - Classification and technical supply conditions (ISO 14919:2023)
Language:
standard ikon pdf
SS-EN ISO 9012:2023
Gas welding equipment - Air-aspirated hand blowpipes - Specifications and tests (ISO 9012:2023)
Language:
standard ikon pdf
SS-ISO 24394:2023
Welding for aerospace applications — Qualification test for welders and welding operators — Fusion welding of metallic components (ISO 24394:2023, IDT)
Language:
standard ikon pdf
SS-EN ISO 14920:2023
Thermal spraying - Spraying and fusing of self-fluxing alloys (ISO 14920:2023)
Language:
standard ikon pdf
SS-EN ISO 3581:2023
Welding consumables - Covered electrodes for manual metal arc welding of stainless and heat-resisting steels - Classification (ISO 3581:2023)
Language:
standard ikon pdf
SS-EN ISO 14172:2023
Welding consumables - Covered electrodes for manual metal arc welding of nickel and nickel alloys - Classification (ISO 14172:2023)
Language:
standard ikon pdf
SS-EN ISO 1089:2023
Resistance welding equipment - Electrode taper fits for spot welding equipment - Dimensions (ISO 1089:2023)
Language:
standard ikon pdf
SS-EN ISO 13920:2023
Welding - General tolerances for welded constructions - Dimensions for lengths and angles - Shape and position (ISO 13920:2023)
Language:
standard ikon pdf
SS-EN 17832:2023
Thermal spraying - Determination of the feed rate with spray material in powder form in a production environment
Language:
standard ikon pdf
SS-EN ISO 25980:2023
Health and safety in welding and allied processes - Transparent welding curtains, strips and screens for arc welding processes (ISO 25980:2023)
Language:
standard ikon pdf
SS-EN ISO 18274:2023
Welding consumables - Solid wire electrodes, solid strip electrodes, solid wires and solid rods for fusion welding of nickel and nickel alloys - Classification (ISO 18274:2023)
Language:
standard ikon pdf
SS-EN ISO 5179:2023
Investigation of brazeability with spreading and gap-filling test (ISO 5179:2021)
Language:
standard ikon pdf
SS-EN ISO 17663:2023
Welding - Quality requirements for heat treatment in connection with welding and allied processes (ISO 17663:2023)
Language:
standard ikon pdf
SS-EN ISO 4063:2023
Welding, brazing, soldering and cutting - Nomenclature of processes and reference numbers (ISO 4063:2023)
Language:
standard ikon pdf
SS-EN ISO 4063:2023
Welding, brazing, soldering and cutting — Nomenclature of processes and reference numbers (ISO 4063:2023, IDT)
Language:
standard ikon pdf
SS-EN ISO 5817:2023
Welding - Fusion-welded joints in steel, nickel, titanium and their alloys (beam welding excluded) - Quality levels for imperfections (ISO 5817:2023)
Language:
standard ikon pdf
SS-EN ISO 5173:2023
Destructive tests on welds in metallic materials - Bend tests (ISO 5173:2023)
Language:
standard ikon pdf
SS-EN ISO 25901-2:2023
Welding and allied processes - Vocabulary - Part 2: Health and safety (ISO 25901-2:2022)
Language:
standard ikon pdf
SS-EN ISO 9455-6:2022
Soft soldering fluxes - Test methods - Part 6: Determination and detection of halide (excluding fluoride) content (ISO 9455-6:2022)
Language:
standard ikon pdf
SS-EN ISO 9455-1:2022
Soft soldering fluxes - Test methods - Part 1: Determination of non-volatile matter, gravimetric method (ISO 9455-1:2022)
Language:
standard ikon pdf
SS-EN ISO 10447:2022
Resistance welding - Testing of welds - Peel and chisel testing of resistance spot and projection welds (ISO 10447:2022)
Language:
standard ikon pdf
SS-EN 14700:2022
Welding consumables - Welding consumables for hard-facing
Language:
standard ikon pdf
SS-EN ISO 12153:2022
Welding consumables - Tubular-cored electrodes for gas-shielded and non-gas-shielded metal arc welding of nickel and nickel alloys - Classification (ISO 12153:2022)
Language:
standard ikon pdf
SS-EN ISO 15615:2022
Gas welding equipment - Acetylene manifold systems for welding, cutting and allied processes - Safety requirements in high-pressure devices (ISO 15615:2022)
Language:
standard ikon pdf
SS-ISO 22688:2022
Brazing - Quality requirements for brazing of metallic materials (ISO 22688:2020, IDT)
Language:
standard ikon pdf
SS-EN ISO 18278-1:2022
Resistance welding - Weldability - Part 1: General requirements for the evaluation of weldability for resistance spot, seam and projection welding of metallic materials (ISO 18278-1:2022)
Language:
standard ikon pdf
SS-EN ISO 4136:2022
Destructive tests on welds in metallic materials - Transverse tensile test (ISO 4136:2022)
Language:
standard ikon pdf
SS-EN ISO 9016:2022
Destructive tests on welds in metallic materials - Impact tests - Test specimen location, notch orientation and examination (ISO 9016:2022)
Language:
standard ikon pdf
SS-EN ISO 17639:2022
Destructive tests on welds in metallic materials - Macroscopic and microscopic examination of welds (ISO 17639:2022)
Language:
standard ikon pdf
SS-EN ISO 3834-5:2021
Quality requirements for fusion welding of metallic materials - Part 5: Documents with which it is necessary to conform to claim conformity to the quality requirements of ISO 3834-2, ISO 3834-3 or ISO 3834-4 (ISO 3834-5:2021)
Language:
standard ikon pdf
SS-EN ISO 15614-12:2021
Specification and qualification of welding procedures for metallic materials - Welding procedure test - Part 12: Spot, seam and projection welding (ISO 15614-12:2021)
Language:
standard ikon pdf
SS-EN ISO 3834-5:2021
Quality requirements for fusion welding of metallic materials - Part 5: Documents with which it is necessary to conform to claim conformity to the quality requirements of ISO 3834-2, ISO 3834-3 or ISO 3834-4 (ISO 3834-5:2021)
Language:
standard ikon pdf
SS-EN ISO 18496:2021
Brazing - Fluxes for brazing - Classification and technical delivery conditions (ISO 18496:2020)
Language:
standard ikon pdf
SS-EN ISO 14922:2021
Thermal spraying - Quality requirements for manufacturers of thermal sprayed coatings (ISO 14922:2021)
Language:
standard ikon pdf
SS-EN ISO 3834-1:2021
Quality requirements for fusion welding of metallic materials - Part 1: Criteria for the selection of the appropriate level of quality requirements (ISO 3834-1:2021)
Language:
standard ikon pdf
SS-EN ISO 3834-1:2021
Quality requirements for fusion welding of metallic materials - Part 1: Criteria for the selection of the appropriate level of quality requirements (ISO 3834-1:2021)
Language:
standard ikon pdf
SS-EN ISO 13918:2018/A1:2021
Welding - Studs and ceramic ferrules for arc stud welding - Amendment 1 (ISO 13918:2017/Amd 1:2021)
Language:
standard ikon pdf
SS-EN 15339-2:2021
Thermal spraying - Safety requirements for thermal spraying equipment - Part 2: Gas control units
Language:
standard ikon pdf
SS-EN ISO 8167:2021
Resistance welding - Embossed projection welding - Projections for resistance welding (ISO 8167:2021)
Language:
standard ikon pdf
SS-EN ISO 17633:2018/A1:2021
Welding consumables - Tubular cored electrodes and rods for gas shielded and non-gas shielded metal arc welding of stainless and heat-resisting steels - Classification - Amendment 1 (ISO 17633:2017/Amd 1:2021)
Language:
standard ikon pdf
SIS-CEN ISO/TR 20172:2021
Welding - Grouping systems for materials - European materials (ISO/TR 20172:2021)
Language:
standard ikon pdf
SS-EN ISO 12671:2021
Thermal spraying - Thermally sprayed coatings - Symbolic representation on drawings (ISO 12671:2021)
Language:
standard ikon pdf
SS-EN ISO 3834-2:2021
Quality requirements for fusion welding of metallic materials - Part 2: Comprehensive quality requirements (ISO 3834-2:2021)
Language:
standard ikon pdf
SS-EN ISO 3834-4:2021
Quality requirements for fusion welding of metallic materials - Part 4: Elementary quality requirements (ISO 3834-4:2021)
Language:
standard ikon pdf
SS-EN ISO 3834-3:2021
Quality requirements for fusion welding of metallic materials - Part 3: Standard quality requirements (ISO 3834-3:2021)
Language:
standard ikon pdf
SS-EN ISO 3834-3:2021
Quality requirements for fusion welding of metallic materials - Part 3: Standard quality requirements (ISO 3834-3:2021)
Language:
standard ikon pdf
SS-EN ISO 3834-2:2021
Quality requirements for fusion welding of metallic materials - Part 2: Comprehensive quality requirements (ISO 3834-2:2021)
Language:
standard ikon pdf
SS-EN ISO 3834-4:2021
Quality requirements for fusion welding of metallic materials - Part 4: Elementary quality requirements (ISO 3834-4:2021)
Language:
standard ikon pdf
SS-EN ISO 8205:2021
Resistance welding equipment - Water-cooled secondary connection cables (ISO 8205:2021)
Language:
standard ikon pdf
SS-EN ISO 17677-1:2021
Resistance welding - Vocabulary - Part 1: Spot, projection and seam welding (ISO 17677-1:2021)
Language:
standard ikon pdf
SS-EN ISO 17279-3:2021
Welding - Micro joining of second generation high temperature superconductors - Part 3: Test methods for joints (ISO 17279-3:2021)
Language:
standard ikon pdf
SS-EN ISO 22826:2021
Destructive tests on welds in metallic materials - Hardness testing of narrow joints welded by laser and electron beam (Vickers and Knoop hardness tests) (ISO 22826:2005)
Language:
standard ikon pdf
SS-EN ISO 10225:2021
Gas welding equipment - Marking for equipment used for gas welding, cutting and allied processes (ISO 10225:2013)
Language:
standard ikon pdf
SS-EN ISO 13919-2:2021
Electron and laser-beam welded joints - Requirements and recommendations on quality levels for imperfections - Part 2: Aluminium, magnesium and their alloys and pure copper (ISO 13919-2:2021)
Language:
standard ikon pdf
SS-EN ISO 5829:2021
Resistance spot welding - Electrode adaptors, female taper 1:10 (ISO 5829:1984)
Language:
standard ikon pdf
SS-EN ISO 20168:2021
Resistance welding - Locking tapers for electrode holders and electrode caps (ISO 20168:2016)
Language:
standard ikon pdf
SS-EN ISO 18595:2021
Resistance welding - Spot welding of aluminium and aluminium alloys - Weldability, welding and testing (ISO 18595:2021)
Language:
standard ikon pdf
SS-EN ISO 5830:2021
Resistance spot welding - Male electrode caps (ISO 5830:1984)
Language:
standard ikon pdf
SS-EN ISO 18785-5:2021
Friction stir spot welding - Aluminium - Part 5: Quality and inspection requirements (ISO 18785-5:2018)
Language:
standard ikon pdf
SS-EN ISO 18785-4:2021
Friction stir spot welding - Aluminium - Part 4: Specification and qualification of welding procedures (ISO 18785-4:2018)
Language:
standard ikon pdf
SS-EN ISO 15616-4:2021
Acceptance tests for CO2-laser beam machines for high quality welding and cutting - Part 4: Machines with 2-D moving optics (ISO 15616-4:2008)
Language:
standard ikon pdf
SS-EN ISO 18785-1:2021
Friction stir spot welding - Aluminium - Part 1: Vocabulary (ISO 18785-1:2018)
Language:
standard ikon pdf
SS-EN ISO 10656:2021
Resistance welding equipment - Transformers - Integrated transformers for welding guns (ISO 10656:2016)
Language:
standard ikon pdf
SS-EN ISO 18785-2:2021
Friction stir spot welding - Aluminium - Part 2: Design of weld joints (ISO 18785-2:2018)
Language:
standard ikon pdf
SS-EN ISO 7285:2021
Pneumatic cylinders for mechanized multiple spot welding (ISO 7285:1995)
Language:
standard ikon pdf
SS-EN ISO 18785-3:2021
Friction stir spot welding - Aluminium - Part 3: Qualification of welding personnel (ISO 18785-3:2018)
Language:
standard ikon pdf
SIS-ISO/TS 20273:2020
Guidelines on weld quality in relationship to fatigue strength (ISO/TS 20273:2017)
Language:
standard ikon pdf
SS-EN ISO 9455-9:2020
Soft soldering fluxes - Test methods - Part 9: Determination of ammonia content (ISO 9455-9:2020)
Language:
standard ikon pdf
SS-EN ISO 9454-2:2020
Soft soldering fluxes - Classification and requirements - Part 2: Performance requirements (ISO 9454-2:2020)
Language:
standard ikon pdf
SS-EN ISO 9455-5:2020
Soft soldering fluxes - Test methods - Part 5: Copper mirror test (ISO 9455-5:2020)
Language:
standard ikon pdf
SS-EN ISO 9453:2020
Soft solder alloys - Chemical compositions and forms (ISO 9453:2020)
Language:
standard ikon pdf
SS-EN ISO 6847:2020
Welding consumables - Deposition of a weld metal pad for chemical analysis (ISO 6847:2020)
Language:
standard ikon pdf
SS-EN ISO 2560:2020
Welding consumables - Covered electrodes for manual metal arc welding of non-alloy and fine grain steels - Classification (ISO 2560:2020)
Language:
standard ikon pdf
SS-EN ISO 15792-2:2020
Welding consumables - Test methods - Part 2: Preparation of single-run and two-run technique test pieces and specimens in steel (ISO 15792-2:2020)
Language:
standard ikon pdf
SS-EN ISO 15792-1:2020
Welding consumables - Test methods - Part 1: Preparation of all-weld metal test pieces and specimens in steel, nickel and nickel alloys (ISO 15792-1:2020)
Language:
standard ikon pdf
SS-EN ISO 14341:2020
Welding consumables - Wire electrodes and weld deposits for gas shielded metal arc welding of non alloy and fine grain steels - Classification (ISO 14341:2020)
Language:
standard ikon pdf
SS-EN ISO 24034:2020
Welding consumables - Solid wire electrodes, solid wires and rods for fusion welding of titanium and titanium alloys - Classification (ISO 24034:2020)
Language:
standard ikon pdf
SS-EN ISO 25239-4:2020
Friction stir welding - Aluminium - Part 4: Specification and qualification of welding procedures (ISO 25239-4:2020)
Language:
standard ikon pdf
SS-EN ISO 25239-5:2020
Friction stir welding - Aluminium - Part 5: Quality and inspection requirements (ISO 25239-5:2020)
Language:
standard ikon pdf
SS-EN ISO 25239-2:2020
Friction stir welding - Aluminium - Part 2: Design of weld joints (ISO 25239-2:2020)
Language:
standard ikon pdf
SS-EN ISO 25239-3:2020
Friction stir welding - Aluminium - Part 3: Qualification of welding operators (ISO 25239-3:2020)
Language:
standard ikon pdf
SS-EN ISO 25239-1:2020
Friction stir welding - Aluminium - Part 1: Vocabulary (ISO 25239-1:2020)
Language:
standard ikon pdf
SS-EN 17393:2020
Thermal spraying - Tubular coating tensile test
Language:
standard ikon pdf
SS-EN ISO 9455-3:2020
Soft soldering fluxes - Test methods - Part 3: Determination of acid value, potentiometric and visual titration methods (ISO 9455-3:2019)
Language:
standard ikon pdf
SS-EN ISO 21904-4:2020
Health and safety in welding and allied processes - Equipment for capture and separation of welding fume - Part 4: Determination of the minimum air volume flow rate of capture devices (ISO 21904-4:2020)
Language:
standard ikon pdf
SS-EN ISO 21904-2:2020
Health and safety in welding and allied processes - Equipment for capture and separation of welding fume - Part 2: Requirements for testing and marking of separation efficiency (ISO 21904-2:2020)
Language:
standard ikon pdf
SS-EN ISO 21904-1:2020
Health and safety in welding and allied processes - Equipment for capture and separation of welding fume - Part 1: General requirements (ISO 21904-1:2020)
Language:
standard ikon pdf
SS-EN ISO 15614-7:2019
Specification and qualification of welding procedures for metallic materials - Welding procedure test - Part 7: Overlay welding (ISO 15614-7:2016)
Language:
standard ikon pdf
SS-EN ISO 9090:2019
Gas tightness of equipment for gas welding and allied processes (ISO 9090:2019)
Language:
standard ikon pdf
SS-EN ISO 13919-1:2019
Electron and laser-beam welded joints - Requirements and recommendations on quality levels for imperfections - Part 1: Steel, nickel, titanium and their alloys (ISO 13919-1:2019)
Language:
standard ikon pdf
SIS-ISO/TR 17671-1:2019
Welding - Recommendations for welding of metallic materials - Part 1: General guidance for arc welding (ISO/TR 17671:2002, IDT)
Language:
standard ikon pdf
SS-EN ISO 6947:2019
Welding and allied processes - Welding positions (ISO 6947:2019)
Language:
standard ikon pdf
SS-EN ISO 15607:2019
Specification and qualification of welding procedures for metallic materials - General rules (ISO 15607:2019)
Language:
standard ikon pdf
SS-EN ISO 9455-16:2019
Soft soldering fluxes - Test methods - Part 16: Flux efficacy test, wetting balance method (ISO 9455-16:2019)
Language:
standard ikon pdf
SS-EN ISO 15609-1:2019
Specification and qualification of welding procedures for metallic materials - Welding procedure specification - Part 1: Arc welding (ISO 15609-1:2019)
Language:
standard ikon pdf
SS-EN ISO 15609-1:2019
Specification and qualification of welding procedures for metallic materials - Welding procedure specification - Part 1: Arc welding (ISO 15609-1:2019)
Language:
standard ikon pdf
SS-EN ISO 15609-2:2019
Specification and qualification of welding procedures for metallic materials - Welding procedure specification - Part 2: Gas welding (ISO 15609-2:2019)
Language:
standard ikon pdf
SS-EN ISO 3821:2019
Gas welding equipment - Rubber hoses for welding, cutting and allied processes (ISO 3821:2019)
Language:
standard ikon pdf
SS-EN ISO 18592:2019
Resistance welding - Destructive testing of welds - Method for the fatigue testing of multi-spot-welded specimens (ISO 18592:2019)
Language:
standard ikon pdf
SS-EN ISO 15614-1:2017/A1:2019
Specification and qualification of welding procedures for metallic materials - Welding procedure test - Part 1: Arc and gas welding of steels and arc welding of nickel and nickel alloys - Amendment 1 (ISO 15614-1:2017/Amd 1:2019)
Language:
standard ikon pdf
SS-EN ISO 15620:2019
Welding - Friction welding of metallic materials (ISO 15620:2019)
Language:
standard ikon pdf
SS-EN ISO 5171:2019
Gas welding equipment - Pressure gauges used in welding, cutting and allied processes (ISO 5171:2019)
Language:
standard ikon pdf
SS-EN ISO 14174:2019
Welding consumables - Fluxes for submerged arc welding and electroslag welding - Classification
Language:
standard ikon pdf
SS-EN ISO 24598:2019
Welding consumables - Solid wire electrodes, tubular cored electrodes and electrode-flux combinations for submerged arc welding of creep-resisting steels - Classification (ISO 24598:2019)
Language:
standard ikon pdf
SS-EN ISO 14731:2019
Welding coordination - Tasks and responsibilities (ISO 14731:2019)
Language:
standard ikon pdf
SS-EN ISO 2063-1:2019
Thermal spraying - Zinc, aluminium and and their alloys - Part 1: Design considerations and quality requirements for corrosion protection systems (ISO 2063-1:2019)
Language:
standard ikon pdf
SS-EN ISO 5178:2019
Destructive tests on welds in metallic materials - Longitudinal tensile test on weld metal in fusion welded joints (ISO 5178:2019)
Language:
standard ikon pdf
SS-EN 1708-2:2018
Welding - Basic weld joint details in steel - Part 2: Non internal pressurized components
Language:
standard ikon pdf
SS-EN 1011-3:2018
Welding - Recommendations for welding of metallic materials - Part 3: Arc welding of stainless steels
Language:
standard ikon pdf
SS-EN 1011-6:2018
Welding - Recommendation for welding of metallic materials - Part 6: Laser beam welding
Language:
standard ikon pdf
SS-EN ISO 17279-2:2018
Welding - Micro joining of 2nd generation high temperature superconductors - Part 2: Qualification for welding and testing personnel (ISO 17279-2:2018)
Language:
standard ikon pdf
SS-EN ISO 17279-1:2018
Welding - Micro joining of 2nd generation high temperature superconductors - Part 1: General requirements for the procedure (ISO 17279-1:2018)
Language:
standard ikon pdf
SS-EN ISO 20378:2018
Welding consumables - Rods for gas welding of non-alloy and creep-resisting steels - Classification (ISO 20378:2017)
Language:
standard ikon pdf
SS-EN ISO 24373:2018
Welding consumables - Solid wires and rods for fusion welding of copper and copper alloys - Classification (ISO 24373:2018)
Language:
standard ikon pdf
SS-EN ISO 8249:2018
Welding - Determination of Ferrite Number (FN) in austenitic and duplex ferritic-austenitic Cr-Ni stainless steel weld metals (ISO 8249:2018)
Language:
standard ikon pdf
SS-EN 560:2018
Gas welding equipment - Hose connections for equipment for welding, cutting and allied processes
Language:
standard ikon pdf
SS-EN ISO 2401:2018
Welding consumables - Covered electrodes - Determination of the efficiency, metal recovery and deposition coefficient (ISO 2401:2018)
Language:
standard ikon pdf
SS-EN ISO 3690:2018
Welding and allied processes - Determination of hydrogen content in arc weld metal (ISO 3690:2018)
Language:
standard ikon pdf
SIS-CEN ISO/TR 20173:2018
Welding - Grouping systems for materials - American materials (ISO/TR 20173:2018)
Language:
standard ikon pdf
SS-EN 13507:2018
Thermal spraying - Pre-treatment of surfaces of metallic parts and components for thermal spraying
Language:
standard ikon pdf
SS-EN 17002:2018
Thermal spraying - Components with thermally sprayed coatings - Thermal spray procedure specification
Language:
standard ikon pdf
SS-EN 1395-5:2018
Thermal spraying - Acceptance inspection of thermal spraying equipment - Part 5: Plasma spraying in chambers
Language:
standard ikon pdf
SS-EN 17001:2018
Thermal spraying - Components with thermally sprayed coatings - Coating specification
Language:
standard ikon pdf
SS-EN ISO 15612:2018
Specification and qualification of welding procedures for metallic materials - Qualification by adoption of a standard welding procedure (ISO 15612:2018)
Language:
standard ikon pdf
SS-EN ISO 10042:2018
Welding - Arc-welded joints in aluminium and its alloys - Quality levels for imperfections (ISO 10042:2018, IDT)
Language:
standard ikon pdf
SS-EN ISO 10042:2018
Welding - Arc-welded joints in aluminium and its alloys - Quality levels for imperfections (ISO 10042:2018)
Language:
standard ikon pdf
SS-EN ISO 14918:2018
Thermal spraying - Qualification testing of thermal sprayers (ISO 14918:2018)
Language:
standard ikon pdf
SS-EN ISO 21904-3:2018
Health and safety in welding and allied processes - Requirements, testing and marking of equipment for air filtration - Part 3: Determination of the capture efficiency of on-torch welding fume extraction devices (ISO 21904-3:2018)
Language:
standard ikon pdf
SS-EN ISO 9455-15:2018
Soft soldering fluxes - Test methods - Part 15: Copper corrosion test (ISO 9455-15:2017)
Language:
standard ikon pdf
SS-EN ISO 9017:2018
Destructive tests on welds in metallic materials - Fracture test (ISO 9017:2017)
Language:
standard ikon pdf
SS-EN ISO 13918:2018
Welding - Studs and ceramic ferrules for arc stud welding (ISO 13918:2017)
Language:
standard ikon pdf
SS-EN ISO 15011-4:2018
Health and safety in welding and allied processes - Laboratory method for sampling fume and gases - Part 4: Fume data sheets (ISO 15011-4:2017)
Language:
standard ikon pdf
SS-EN ISO 14114:2018
Gas welding equipment - Acetylene manifold systems for welding, cutting and allied processes - General requirements (ISO 14114:2017)
Language:
standard ikon pdf
SS-EN ISO 5175-1:2018
Gas welding equipment - Safety devices - Part 1: Devices incorporating a flame (flashback) arrestor (ISO 5175-1:2017)
Language:
standard ikon pdf
SS-EN ISO 15296:2018
Gas welding equipment - Vocabulary (ISO 15296:2017)
Language:
standard ikon pdf
SS-EN ISO 9455-14:2018
Soft soldering fluxes - Test methods - Part 14: Assessment of tackiness of flux residues (ISO 9455-14:2017)
Language:
standard ikon pdf
SS-EN ISO 9455-11:2018
Soft soldering fluxes - Test methods - Part 11: Solubility of flux residues (ISO 9455-11:2017)
Language:
standard ikon pdf
SS-EN ISO 17836:2017
Thermal spraying - Determination of the deposition efficiency for thermal spraying (ISO 17836:2017)
Language:
standard ikon pdf
SS-EN ISO 5175-2:2017
Gas welding equipment - Safety devices - Part 2: Not incorporating a flame (flashback) arrestor (ISO 5175-2:2017)
Language:
standard ikon pdf
SS-EN ISO 22829:2017
Resistance welding equipment - Transformers - Integrated transformer-rectifier units for welding guns operating at 1 000 Hz (ISO 22829:2017)
Language:
standard ikon pdf
SS-EN ISO 2063-2:2017
Thermal spraying - Zinc, aluminium and their alloys - Part 2: Execution of corrosion protection systems (ISO 2063-2:2017)
Language:
standard ikon pdf
SS-EN ISO 14271:2017
Resistance welding - Vickers hardness testing (low-force and microhardness) of resistance spot, projection, and seam welds (ISO 14271:2017)
Language:
standard ikon pdf
SS-EN ISO 9455-13:2017
Soft soldering fluxes - Test methods - Part 13: Determination of flux spattering (ISO 9455-13:2017)
Language:
standard ikon pdf
SS-EN ISO 18278-3:2017
Resistance welding - Weldability - Part 3: Evaluation procedures for weldability in spot weld bonding (ISO 18278-3:2017)
Language:
standard ikon pdf
SS-EN ISO 9606-1:2017
Qualification testing of welders - Fusion welding - Part 1: Steels (ISO 9606-1:2012 including Cor 1:2012 and Cor 2:2013)
Language:
standard ikon pdf
SS-EN ISO 9606-1:2017
Qualification testing of welders - Fusion welding - Part 1: Steels (ISO 9606-1:2012 including Cor 1:2012 and Cor 2:2013)
Language:
standard ikon pdf
SS-EN ISO 5182:2017
Resistance welding - Materials for electrodes and ancillary equipment (ISO 5182:2016)
Language:
standard ikon pdf
SS-ISO 20267:2017
Thermal spraying - Determination of interfacial toughness of ceramic coatings by indentation (ISO 20267:2017, IDT)
Language:
standard ikon pdf
SS-EN ISO 14232-1:2017
Thermal spraying - Powders - Part 1: Characterization and technical supply conditions (ISO 14232-1:2017)
Language:
standard ikon pdf
SS-EN 13479:2017
Welding consumables - General product standard for filler metals and fluxes for fusion welding of metallic materials
Language:
standard ikon pdf
SS-EN ISO 15614-1:2017
Specification and qualification of welding procedures for metallic materials - Welding procedure test - Part 1: Arc and gas welding of steels and arc welding of nickel and nickel alloys (ISO 15614-1:2017)
Language:
standard ikon pdf
SS-EN ISO 15614-1:2017
Specification and qualification of welding procedures for metallic materials - Welding procedure test - Part 1: Arc and gas welding of steels and arc welding of nickel and nickel alloys (ISO 15614-1:2017)
Language:
standard ikon pdf
SS-EN ISO 3580:2017
Welding consumables - Covered electrodes for manual metal arc welding of creep-resisting steels - Classification (ISO 3580:2017)
Language:
standard ikon pdf
SS-EN ISO 14917:2017
Thermal spraying - Terminology, classification (ISO 14917:2017)
Language:
standard ikon pdf
SS-EN ISO 14916:2017
Thermal spraying - Determination of tensile adhesive strength (ISO 14916:2017)
Language:
standard ikon pdf
SS-EN ISO 17916:2017
Safety of thermal cutting machines (ISO 17916:2016)
Language:
standard ikon pdf
SS-EN ISO 9013:2017
Thermal cutting — Classification of thermal cuts — Geometrical product specification and quality tolerances (ISO 9013:2017, IDT)
Language:
standard ikon pdf
SS-EN ISO 9013:2017
Thermal cutting — Classification of thermal cuts — Geometrical product specification and quality tolerances (ISO 9013:2017, IDT) (ISO 9013:2017, IDT)
Language:
standard ikon pdf
SS-ISO 13469:2017
Mechanical joining - Form-fit blind rivets and (lock) bolt joints - Specifications and qualification of testing procedures (ISO 13469:2014, IDT)
Language:
standard ikon pdf
SS-EN ISO 9692-3:2016
Welding and allied processes - Types of joint preparation - Part 3: Metal inert gas welding and tungsten inert gas welding of aluminium and its alloys (ISO 9692-3:2016)
Language:
standard ikon pdf
SS-EN ISO 9692-3:2016
Welding and allied processes - Types of joint preparation - Part 3: Metal inert gas welding and tungsten inert gas welding of aluminium and its alloys (ISO 9692-3:2016)
Language:
standard ikon pdf
SS-EN 16813:2016
Thermal spraying - Measurement of the electrical conductivity of thermal sprayed non-iron metal coatings by means of eddy current method
Language:
standard ikon pdf
SS-EN ISO 15618-1:2016
Qualification testing of welders for underwater welding - Part 1: Hyperbaric wet welding (ISO 15618-1:2016)
Language:
standard ikon pdf
SS-EN ISO 3677:2016
Filler metal for soldering and brazing - Designation (ISO 3677:2016)
Language:
standard ikon pdf
SS-EN ISO 14171:2016
Welding consumables - Solid wire electrodes, tubular cored electrodes and electrode/flux combinations for submerged arc welding of non alloy and fine grain steels - Classification (ISO 14171:2016)
Language:
standard ikon pdf
SS-EN ISO 19288:2016
Welding consumables - Solid wire electrodes, solid wires and rods for fusion welding of magnesium and magnesium alloys - Classification (ISO 19288:2016)
Language:
standard ikon pdf
SS-EN ISO 17777:2016
Welding consumables - Covered electrodes for manual metal arc welding of copper and copper alloys - Classification (ISO 17777:2016)
Language:
standard ikon pdf
SS-EN ISO 15614-8:2016
Specification and qualification of welding procedures for metallic materials - Welding procedure test - Part 8: Welding of tubes to tube-plate joints (ISO 15614-8:2016)
Language:
standard ikon pdf
SS-EN ISO 14273:2016
Resistance welding - Destructive testing of welds - Specimen dimensions and procedure for tensile shear testing resistance spot and embossed projection welds (ISO 14273:2016)
Language:
standard ikon pdf
SS-EN ISO 14272:2016
Resistance welding - Destructive testing of welds - Specimen dimensions and procedure for cross tension testing of resistance spot and embossed projection welds (ISO 14272:2016)
Language:
standard ikon pdf
SS-EN ISO 14270:2016
Resistance welding - Destructive testing of welds - Specimen dimensions and procedure for mechanized peel testing resistance spot, seam and embossed projection welds (ISO 14270:2016)
Language:
standard ikon pdf
SS-EN ISO 669:2016
Resistance welding - Resistance welding equipment - Mechanical and electrical requirements (ISO 669:2016)
Language:
standard ikon pdf
SS-EN ISO 9454-1:2016
Soft soldering fluxes - Classification and requirements - Part 1: Classification, labelling and packaging (ISO 9454-1:2016)
Language:
standard ikon pdf
SS-EN ISO 9015-2:2016
Destructive tests on welds in metallic materials - Hardness testing - Part 2: Microhardness testing of welded joints (ISO 9015-2:2016)
Language:
standard ikon pdf
SS-EN ISO 18278-2:2016
Resistance welding - Weldability - Part 2: Evaluation procedures for weldability in spot welding (ISO 18278-2:2016)
Language:
standard ikon pdf
SS-EN ISO 8430-1:2016
Resistance spot welding - Electrode holders - Part 1: Taper fixing 1:10 (ISO 8430-1:2016)
Language:
standard ikon pdf
SS-EN ISO 8430-3:2016
Resistance spot welding - Electrode holders - Part 3: Parallel shank fixing for end thrust (ISO 8430-3:2016)
Language:
standard ikon pdf
SS-EN ISO 8430-2:2016
Resistance spot welding - Electrode holders - Part 2: Morse taper fixing (ISO 8430-2:2016)
Language:
standard ikon pdf
SS-EN ISO 6848:2016
Arc welding and cutting - Nonconsumable tungsten electrodes - Classification (ISO 6848:2015)
Language:
standard ikon pdf
SS-EN ISO 17632:2016
Welding consumables - Tubular cored electrodes for gas shielded and non-gas shielded metal arc welding of non-alloy and fine grain steels - Classification (ISO 17632:2015)
Language:
standard ikon pdf
SS-EN ISO 18273:2016
Welding consumables - Wire electrodes, wires and rods for welding of aluminium and aluminium alloys - Classification (ISO 18273:2015)
Language:
standard ikon pdf
SS-EN ISO 1071:2016
Welding consumables - Covered electrodes, wires, rods and tubular cored electrodes for fusion welding of cast iron - Classification (ISO 1071:2015)
Language:
standard ikon pdf
SS-EN ISO 17683:2015
Ships and marine technology - Ceramic weld backing for marine use (ISO 17683:2014)
Language:
standard ikon pdf
SS-EN ISO 17641-2:2015
Destructive tests on welds in metallic materials - Hot cracking tests for weldments - Arc welding processes - Part 2: Self-restraint tests (ISO 17641-2:2015)
Language:
standard ikon pdf
SS-EN ISO 9018:2015
Destructive tests on welds in metallic materials - Tensile test on cruciform and lapped joints (ISO 9018:2015)
Language:
standard ikon pdf
SS-EN ISO 12670:2015
Thermal spraying - Components with thermally sprayed coatings - Technical supply conditions (ISO 12670:2011)
Language:
standard ikon pdf
SS-EN ISO 12679:2015
Thermal spraying - Recommendations for thermal spraying (ISO 12679:2011)
Language:
standard ikon pdf
SS-EN ISO 17634:2015
Welding consumables - Tubular cored electrodes for gas shielded metal arc welding of creep-resisting steels - Classification (ISO 17634:2015)
Language:
standard ikon pdf
SS-EN ISO 17658:2015
Welding - Imperfections in oxyfuel flame cuts, laser beam cuts and plasma cuts - Terminology (ISO 17658:2002)
Language:
standard ikon pdf
SS-EN ISO 14323:2015
Resistance welding - Destructive testing of welds - Specimen dimensions and procedure for impact tensile shear test and cross-tension testing of resistance spot and embossed projection welds (ISO 14323:2015)
Language:
standard ikon pdf
SS-EN ISO 5826:2014
Resistance welding equipment - Transformers - General specifications applicable to all transformers (ISO 5826:2014)
Language:
standard ikon pdf
SS-EN ISO 14554-2:2013
Quality requirements for welding - Resistance welding of metallic materials - Part 2: Elementary quality requirements (ISO 14554-2:2013)
Language:
standard ikon pdf
SS-EN ISO 14554-1:2013
Quality requirements for welding - Resistance welding of metallic materials - Part 1: Comprehensive quality requirements (ISO 14554-1:2013)
Language:
standard ikon pdf
SS-EN ISO 9692-1:2013
Welding and allied processes - Types of joint preparation - Part 1: Manual metal arc welding, gas-shielded metal arc welding, gas welding, TIG welding and beam welding of steels (ISO 9692-1:2013)
Language:
standard ikon pdf
SS-EN ISO 9692-1:2013
Welding and allied processes - Types of joint preparation - Part 1: Manual metal arc welding, gas-shielded metal arc welding, gas welding, TIG welding and beam welding of steels (ISO 9692-1:2013)
Language:
standard ikon pdf
SS-EN ISO 6520-2:2013
Welding and allied processes - Classification of geometric imperfections in metallic materials - Part 2: Welding with pressure (ISO 6520-2:2013)
Language:
standard ikon pdf
SS-EN ISO 9312:2013
Resistance welding equipment - Insulated pins for use in electrode back-ups (ISO 9312:2013)
Language:
standard ikon pdf
SS-EN ISO 12996:2013
Mechanical joining - Destructive testing of joints - Specimen dimensions and test procedure for tensile shear testing of single joints (ISO 12996:2013)
Language:
standard ikon pdf
SS-EN ISO 15614-14:2013
Specification and qualification of welding procedures for metallic materials - Welding procedure test - Part 14: Laser-arc hybrid welding of steels, nickel and nickel alloys (ISO 15614-14:2013)
Language:
standard ikon pdf
SS-EN ISO 12932:2013
Welding - Laser-arc hybrid welding of steels, nickel and nickel alloys - Quality levels for imperfections (ISO 12932:2013)
Language:
standard ikon pdf
SS-EN ISO 15609-6:2013
Specification and qualification of welding procedures for metallic materials - Welding procedure specification - Part 6: Laser-arc hybrid welding (ISO 15609-6:2013)
Language:
standard ikon pdf
SS-ISO 13826:2013
Metallic and other inorganic coatings - Determination of thermal diffusivity of thermally sprayed ceramic coatings by laser flash method (ISO 13826:2013, IDT)
Language:
standard ikon pdf
SIS-CEN ISO/TS 15011-6:2012
Health and safety in welding and allied processes - Laboratory method for sampling fume and gases - Part 6: Procedure for quantitative determination of fume and gases from resistance spot welding (ISO/TS 15011- 6:2011)
Language:
standard ikon pdf
SIS-ISO/TR 14345:2012
Fatigue — Fatigue testing of welded components — Guidance (ISO/TR 14345:2012, IDT)
Language:
standard ikon pdf
SS-EN ISO 9455-10:2012
Soft soldering fluxes - Test methods - Part 10: Flux efficacy test, solder spread method (ISO 9455-10:2012)
Language:
standard ikon pdf
SS-EN ISO 17653:2012
Resistance welding - Destructive tests on welds in metallic materials - Torsion test of resistance spot welds (ISO 17653:2012)
Language:
standard ikon pdf
SS-EN 1708-3:2012
Welding - Basic weld joint details in steel - Part 3: Clad, buttered and lined pressurized components
Language:
standard ikon pdf
SS-EN ISO 13123:2011
Metallic and other inorganic coatings - Test method of cyclic heating for thermal-barrier coatings under temperature gradient (ISO 13123:2011)
Language:
standard ikon pdf
SS-EN ISO 15609-5:2011
Specification and qualification of welding procedures for metallic materials - Welding procedure specification - Part 5: Resistance welding (ISO 15609-5:2011, Corrected version 2011-12-01)
Language:
standard ikon pdf
SS-EN ISO 15011-5:2011
Health and safety in welding and allied processes - Laboratory method for sampling fume and gases - Part 5: Identification of thermal-degradation products generated when welding or cutting through products composed wholly or partly of organic materials using pyrolysis-gas chromatography-mass spectrometry (ISO 15011-5:2011)
Language:
standard ikon pdf
SS-EN ISO 17654:2011
Resistance welding - Destructive tests of welds - Pressure test of resistance seam welds (ISO 17654:2011)
Language:
standard ikon pdf
SS-EN ISO 14372:2011
Welding consumables - Determination of moisture resistance of manual metal arc welding electrodes by measurement of diffusible hydrogen (ISO 14372:2011)
Language:
standard ikon pdf
SS-EN ISO 15792-3:2011
Welding consumables - Test methods - Part 3: Classification testing of positional capacity and root penetration of welding consumables in a fillet weld (ISO 15792-3:2011)
Language:
standard ikon pdf
SS-EN ISO 9015-1:2011
Destructive tests on welds in metallic materials - Hardness testing - Part 1: Hardness test on arc welded joints (ISO 9015-1:2001)
Language:
standard ikon pdf
SS-EN ISO 9015-1:2011
Destructive tests on welds in metallic materials - Hardness testing - Part 1: Hardness test on arc welded joints (ISO 9015-1:2001)
Language:
standard ikon pdf
SS-EN ISO 12690:2011
Metallic and other inorganic coatings - Thermal spray coordination - Tasks and responsibilities (ISO 12690:2010)
Language:
standard ikon pdf
SS-EN ISO 14921:2010
Thermal spraying - Procedures for the application of thermally sprayed coatings for engineering components (ISO 14921:2010)
Language:
standard ikon pdf
SS-EN 1708-1:2010
Welding - Basic welded joint details in steel - Part 1: Pressurized components
Language:
standard ikon pdf
SS-EN ISO 15011-2:2009
Health and safety in welding and allied processes - Laboratory method for sampling fume and gases - Part 2: Determination of the emission rates of carbon monoxide (CO), carbon dioxide (CO2), nitrogen monoxide (NO) and nitrogen dioxide (NO2) during arc welding, cutting and gouging (ISO 15011-2:2009)
Language:
standard ikon pdf
SS-EN ISO 15011-3:2009
Health and safety in welding and allied processes - Laboratory method for sampling fume and gases - Part 3: Determination of ozone emission rate during arc welding (ISO 15011-3:2009)
Language:
standard ikon pdf
SS-EN ISO 15011-1:2009
Health and safety in welding and allied processes - Laboratory method for sampling fume and gases - Part 1: Determination of fume emission rate during arc welding and collection of fume for analysis (ISO 15011-1:2009)
Language:
standard ikon pdf
SS-EN ISO 15609-4:2009
Specification and qualification of welding procedures for metallic materials - Welding procedure specification - Part 4: Laser beam welding (ISO 15609-4:2009)
Language:
standard ikon pdf
SS-EN 1011-1:2009
Welding - Recommendations for welding of metallic materials - Part 1: General guidance for arc welding
Language:
standard ikon pdf
SS-EN 1011-1:2009
Welding - Recommendations for welding of metallic materials - Part 1: General guidance for arc welding
Language:
standard ikon pdf
SS-EN 15648:2009
Thermal spraying - Component related procedure qualification
Language:
standard ikon pdf
SS-EN ISO 14744-1:2008
Welding - Acceptance inspection of electron beam welding machines - Part 1: Principles and acceptance conditions (ISO 14744-1:2008)
Language:
standard ikon pdf
SS-EN ISO 15614-3:2008
Specification and qualification of welding procedures for metallic materials - Welding procedure test - Part 3: Fusion welding of non-alloyed and low-alloyed cast irons (ISO 15614-3:2008)
Language:
standard ikon pdf
SS-EN ISO 14175:2008
Welding consumables - Gases and gas mixtures for fusion welding and allied processes (ISO 14175:2008)
Language:
standard ikon pdf
SS-EN ISO 14175:2008
Welding consumables - Gases and gas mixtures for fusion welding and allied processes (ISO 14175:2008)
Language:
standard ikon pdf
SS-EN ISO 6520-1:2007
Welding and allied processes - Classification of geometric imperfections in metallic materials - Part 1: Fusion welding (ISO 6520-1:2007)
Language:
standard ikon pdf
SS-EN ISO 16433:2007
Resistance welding - Procedure for seam welding of uncoated and coated low carbon steels (ISO 16433:2006)
Language:
standard ikon pdf
SS-EN ISO 16432:2007
Resistance welding - Procedure for projection welding of uncoated and coated low carbon steels using embossed projection(s) (ISO 16432:2006)
Language:
standard ikon pdf
SS-EN ISO 17657-5:2007
Resistance welding - Welding current measurement for resistance welding - Part 5: Verification of welding current measuring system (ISO 17657-5:2005)
Language:
standard ikon pdf
SS-EN ISO 17657-4:2007
Resistance welding - Welding current measurement for resistance welding - Part 4: Calibration system (ISO 17657-4:2005)
Language:
standard ikon pdf
SS-EN ISO 17657-3:2007
Resistance welding - Welding current measurement for resistance welding - Part 3: Current sensing coil (ISO 17657-3:2005)
Language:
standard ikon pdf
SS-EN ISO 17657-2:2007
Resistance welding - Welding current measurement for resistance welding - Part 2: Welding current meter with current sensing coil (ISO 17657-2:2005)
Language:
standard ikon pdf
SS-EN ISO 17657-1:2007
Resistance welding - Welding current measurement for resistance welding - Part 1: Guidelines for measurement (ISO 17657-1:2005)
Language:
standard ikon pdf
SS-EN 15340:2007
Thermal spraying - Determination of shear load resistance of thermally sprayed coatings
Language:
standard ikon pdf
SIS-CEN ISO/TR 3834-6:2007
Quality requirements for fusion welding of metallic materials - Part 6: Guidelines on implementing ISO 3834 (ISO/TR 3834-6:2007)
Language:
standard ikon pdf
SS-EN ISO 18594:2007
Resistance spot-, projection- and seam-welding - Method for determining the transition resistance on aluminium and steel material (ISO 18594:2007)
Language:
standard ikon pdf
SIS-CEN/TR 15481:2006
Welding of reinforcing steel - Tack weldability - Test methods and performance requirements
Language:
standard ikon pdf
SS-EN 1395-7:2007
Thermal spraying - Acceptance inspection of thermal spraying equipment - Part 7: Powder feed system
Language:
standard ikon pdf
SS-EN 1395-6:2007
Thermal spraying - Acceptance inspection of thermal spraying equipment - Part 6: Manipulator systems
Language:
standard ikon pdf
SS-EN 1395-4:2007
Thermal spraying - Acceptance inspection of thermal spraying equipment - Part 4: Plasma spraying
Language:
standard ikon pdf
SS-EN 1395-3:2007
Thermal spraying - Acceptance inspection of thermal spraying equipment - Part 3: Arc spraying
Language:
standard ikon pdf
SS-EN 1395-2:2007
Thermal spraying - Acceptance inspection of thermal spraying equipment - Part 2: Flame spraying including HVOF
Language:
standard ikon pdf
SS-EN 1395-1:2007
Thermal spraying - Acceptance inspection of thermal spraying equipment - Part 1: General requirements
Language:
standard ikon pdf
SIS-CEN ISO/TR 20174:2007
Welding - Grouping systems for materials - Japanese materials (ISO/TR 20174:2005)
Language:
standard ikon pdf
SS-EN ISO 17660-2:2006
Welding - Welding of reinforcing steel - Part 2: Non load-bearing welded joints (ISO 17660-2:2006)
Language:
standard ikon pdf
SS-EN ISO 17660-1:2006
Welding - Welding of reinforcing steel - Part 1: Load-bearing welded joints (ISO 17660-1:2006)
Language:
standard ikon pdf
SS-EN ISO 15614-6:2006
Specification and qualification of welding procedures for metallic materials - Welding procedure test - Part 6: Arc and gas welding of copper and its alloys (ISO 15614-6:2006)
Language:
standard ikon pdf
SS-EN ISO 14924:2005
Thermal spraying - Post-treatment and finishing of thermally sprayed coatings (ISO 14924:2005)
Language:
standard ikon pdf
SS-EN ISO 22827-2:2005
Acceptance tests for Nd:YAG laser beam welding machines - Machines with optical fibre delivery - Part 2: Moving mechanism (ISO 22827-2:2005)
Language:
standard ikon pdf
SS-EN ISO 22827-1:2005
Acceptance tests for Nd:YAG laser beam welding machines - Machines with optical fibre delivery - Part 1: Laser assembly (ISO 22827-1:2005)
Language:
standard ikon pdf
SS-EN ISO 17642-3:2005
Destructive tests on welds in metallic materials - Cold cracking tests for weldments - Arc welding processes - Part 3: Externally loaded tests (ISO 17642-3:2005)
Language:
standard ikon pdf
SS-EN ISO 17642-2:2005
Destructive tests on welds in metallic materials - Cold cracking tests for weldments - Arc welding processes - Part 2: Self-restraint tests (ISO 17642-2:2005)
Language:
standard ikon pdf
SS-EN ISO 15614-4:2005
Specification and qualification of welding procedures for metallic materials - Welding procedure test - Part 4: Finishing welding of aluminium castings (ISO 15614-4:2005)
Language:
standard ikon pdf
SS-EN ISO 15614-10:2005
Specification and qualification of welding procedures for metallic materials - Welding procedure test - Part 10: Hyperbaric dry welding (ISO 15614-10:2005)
Language:
standard ikon pdf
SS-EN ISO 17659:2005
Welding - Multilingual terms for welded joints with illustrations (ISO 17659:2002)
Language:
standard ikon pdf
SS-EN 14324:2004
Brazing - Guidance on the application of brazed joints
Language:
standard ikon pdf
SS-EN 1011-7:2004
Welding - Recommendations for welding of metallic materials - Part 7: Electron beam welding
Language:
standard ikon pdf
SS-EN ISO 14327:2004
Resistance welding - Procedures for determining the weldability lobe for resistance spot, projection and seam welding (ISO 14327:2004)
Language:
standard ikon pdf
SS-EN 12797/A1:2004
Brazing - Destructive tests of brazed joints
Language:
standard ikon pdf
SS-EN ISO 14329:2004
Resistance welding - Destructive tests of welds - Failure types and geometric measurements for resistance spot, seam and projection welds (ISO 14329:2003)
Language:
standard ikon pdf
SS-EN ISO 14324:2004
Resistance spot welding - Destructive tests of welds - Method for the fatigue testing of spot welded joints (ISO 14324:2003)
Language:
standard ikon pdf
SS-EN 1011-4/A1:2004
Welding - Recommendations for welding of metallic materials - Part 4: Arc welding of aluminium and aluminium alloys
Language:
standard ikon pdf
SS-EN 1011-2/A1:2004
Welding - Recommendations for welding of metallic materials - Part 2: Arc welding of ferritic steels
Language:
standard ikon pdf
SS-EN ISO 17652-2:2004
Welding - Test for shop primers in relation to welding and allied processes - Part 2: Welding properties of shop primers (ISO 17652-2:2003)
Language:
standard ikon pdf
SS-EN ISO 17652-4:2004
Welding - Test for shop primers in relation to welding and allied processes - Part 4: Emission of fumes and gases (ISO 17652-4:2003)
Language:
standard ikon pdf
SS-EN ISO 17652-3:2004
Welding - Test for shop primers in relation to welding and allied processes - Part 3: Thermal cutting (ISO 17652-3:2003)
Language:
standard ikon pdf
SS-EN ISO 17652-1:2004
Welding - Test for shop primers in relation to welding and allied processes - Part 1: General requirements (ISO 17652-1:2003)
Language:
standard ikon pdf
SS-EN ISO 8166:2004
Resistance welding - Procedure for the evaluation of the life of spot welding electrodes using constant machine settings (ISO 8166:2003)
Language:
standard ikon pdf
SS-EN ISO 14923:2004
Thermal spraying - Characterization and testing of thermally sprayed coatings (ISO 14923:2003)
Language:
standard ikon pdf
SS-EN ISO 17834
Thermal spraying - Coatings for protection against corrosion and oxidation at elevated temperatures (ISO 17834:2003)
Language:
standard ikon pdf
SS-EN 1792
Welding - Multilingual list of terms for welding and related processes
Language:
standard ikon pdf
SS-EN ISO 9692-4:2004
Welding and allied processes - Recommendations for joint preparation - Part 4: Clad steels (ISO 9692-4:2003)�
Language:
standard ikon pdf
SS-EN 1011-5
Welding - Recommendations for welding of metallic materials - Part 5: Welding of clad steels
Language:
standard ikon pdf
SS-EN ISO 15616-2
Acceptance tests for CO2-laser beam machines for high quality welding and cutting - Part 2: Measurement of static and dynamic accuracy (ISO 15616-2:2003)
Language:
standard ikon pdf
SS-EN ISO 15616-3
Acceptance tests for CO2-laser beam machines for high quality welding and cutting - Part 3: Calibration of instruments for measurement of gas flow and pressure (ISO 15616-3:2003)
Language:
standard ikon pdf
SS-EN ISO 15616-1
Acceptance tests for CO2-laser beam machines for high quality welding and cutting - Part 1: General principles, acceptance conditions (ISO 15616-1:2003)
Language:
standard ikon pdf
SS-EN ISO 5183-2
Resistance spot welding - Electrode adaptors, male taper 1:10 - Part 2: Parallel shank fixing for end-thrust electrodes (ISO 5183:2000)
Language:
standard ikon pdf
SS-EN 1011-2
Welding - Recommendations for welding of metallic materials - Part 2: Arc welding of ferritic steels
Language:
standard ikon pdf
SS-EN 1011-4
Welding - Recommendations for welding of metallic materials - Part 4: Arc welding of aluminium and aluminium alloys
Language:
standard ikon pdf
SS-EN ISO 5828
Resistance welding equipment - Secondary connecting cables with terminals connected to water-cooled lugs - Dimensions and characteristics (ISO 5828:2001)
Language:
standard ikon pdf
SS-EN 12799
Brazing - Non-destructive examination of brazed joints
Language:
standard ikon pdf
SS-EN 12797
Brazing - Destructive tests of brazed joints
Language:
standard ikon pdf
SS-EN ISO 14744-6
Welding - Acceptance inspection of electron beam welding machines - Part 6: Measurement of stability of spot position (ISO 14744-6:2000)�
Language:
standard ikon pdf
SS-EN ISO 14744-5
Welding - Acceptance inspection of electron beam welding machines - Part 5: Measurement of run-out accuracy (ISO 14744-5:2000)�
Language:
standard ikon pdf
SS-EN ISO 14744-2
Welding - Acceptance inspection of electron beam welding machines - Part 2: Measurement of accelerating voltage characteristics (ISO 14744-2:2000)�
Language:
standard ikon pdf
SS-EN ISO 14744-4
Welding - Acceptance inspection of electron beam welding machines - Part 4: Measurement of welding speed (ISO 14744-4:2000)�
Language:
standard ikon pdf
SS-EN 12074
Welding consumables - Quality requirements for manufacture, supply and distribution of consumables for welding and allied processes�
Language:
standard ikon pdf
SS-EN ISO 14744-3
Welding - Acceptance inspection of electron beam welding machines - Part 3: Measurement of beam current characteristics (ISO 14744-3:2000)�
Language:
standard ikon pdf
SS-EN ISO 9606-5
Approval testing of welders - Fusion welding - Part 5: Titanium and titanium alloys, zirconium and zirconium alloys (ISO 9606-5:2000)
Language:
standard ikon pdf
SS-EN ISO 5183-1
Resistance welding equipment - Electrode adaptors, male taper 1:10 - Part 1: Conical fixing, taper 1:10 (ISO 5183-1:1998)�
Language:
standard ikon pdf
SS-EN ISO 9606-4
Approval testing of welders - Fusion welding - Part 4: Nickel and nickel alloys (ISO 9606-4:1999)�
Language:
standard ikon pdf
SS-EN ISO 9606-3
Approval testing of welders - Fusion welding - Part 3: Copper and copper alloys (ISO 9606-3:1999)�
Language:
standard ikon pdf
SS-EN ISO 12224-2
Flux cored solder wire - Specification and test methods - Part 2: Determination of flux content (ISO 12224-2:1997)
Language:
standard ikon pdf
SS-EN ISO 12224-1
Solder wire, solid and flux cored - Specification and test methods - Part 1: Classification and performance requirements (ISO 12224-1:1997)
Language:
standard ikon pdf
SS-EN ISO 10564
Soldering and brazing materials - Methods for thesampling of soft solders for analysis) (ISO 10564:1993)
Language:
standard ikon pdf
SS-EN ISO 9455-2
Soft soldering fluxes - Test methods - Part 2: Determination of non-volatile matter, ebulliometric method (ISO 9455-2:1993)
Language:
standard ikon pdf
SS-ISO 8167
Projections for resistance welding
Language:
standard ikon pdf
SS-ISO 9313
Resistance spot welding equipment - Cooling tubes
Language:
standard ikon pdf
SS 2630
Welding equipment - TIG Torches - Threads, dimensions and marking
Language:
standard ikon pdf
SS 1983
Power sources for arc welding with consumable electrode wires (MIG/MAG processes)
Language:
standard ikon pdf
SS 2612
Welding equipment - Arc welding - Contact tips for MIG/MAG welding guns - Dimensions, material and marking
Language:
standard ikon pdf
SS-ISO 5184
Straight resistance spot welding electrodes
Language:
standard ikon pdf
SS 68114
Resistance welding - Terminology
Language:
standard ikon pdf
SIS 62301
Welding. Evaluation of change in hardness of steel. Bead-on-plate test
Language:
standard ikon pdf
SS-EN ISO 5817:2023
Welding — Fusion-welded joints in steel, nickel, titanium and their alloys (beam welding excluded) — Quality levels for imperfections (ISO 5817:2023, IDT) (ISO 5817:2023, IDT)
Language:
Show more Show less
Working group 10 workgroups
SIS/TK 134/AG 01, AGS 440 Terminologi
SIS/TK 134/AG 02, AGS 442 Svetsupplysningar
SIS/TK 134/AG 03, AGS 443 Tillsatsmaterial för svetsning
SIS/TK 134/AG 05, AGS 445 Kvalifikationskrav vid svetsning
SIS/TK 134/AG 06, AGS 446 Kvalitetskrav för svetsade produkter
SIS/TK 134/AG 07, AGS 447 Kvalitetssäkring vid svetsning
SIS/TK 134/AG 08, AGS 448 Termisk sprutning
SIS/TK 134/AG 09, AGS 449 Miljö, hälsa och säkerhet
SIS/TK 134/AG 10, AGS 450 Motståndssvetsning
SIS/TK 134/AG 12, AGS 451 Laserbearbetning
Show more Show less
Participants 74 companies and organizations
A Kihlander Engineering, Västerås
AFRY Sweden AB, Göteborg
AFRY Sweden AB, Solna
Alfa Laval Technologies AB, Skogstorp
Alleima Tube AB, Sandviken
Arbetsmiljöverket, Solna
BAE Systems Bofors AB, Karlskoga
Berjo-WeldDesign AB, Växjö
Castolin Scandinavia AB, Partille
Caverion Sverige AB, Göteborg
CG Welding AB, Laxå
DEKRA Industrial AB, Göteborg
DEKRA Industrial AB, Solna
Dellner Couplers AB, Falun
Element Materials Technology AB, Linköping
Epiroc Rock Drills AB, Örebro
ESAB AB, GÖTEBORG
ESAB AB Welding Automation, Laxå
EuroMaint Rail AB, Solna
Forsmarks Kraftgrupp AB, Östhammar
Gasiq AB, Stenkullen
Gestamp HardTech AB, Luleå
GLS Properties AB, Gnosjö
HC Starck International Sales GMBH Germany Fil Skandinavien, Billdal
Hitachi Energy Sweden AB - High Voltage Products, Ludvika
Höganäs Sweden AB, Höganäs
Högskolan Väst, Trollhättan
IF Metall, Stockholm
Inheat Industrial Heating AB, Sollentuna
Karolinska Institutet, Solna
Kemppi Sverige AB, Sollentuna
Kiwa Inspecta AB, Borlänge
Kiwa Sweden AB, Solna
KTH, Stockholm
Landsorganisationen i Sverige LO, Stockholm
Lemont AB, Ludvika
Lincoln Electric Nordic Sweden Filial, Solna
Linde Gas AB, Solna
Nederman Holding AB, Helsingborg
Nordcert AB, Stockholm
Oerlikon Skandinavien AB, Upplands Väsby
OKG AB, Figeholm
Outokumpu Stainless AB, DEGERFORS
Outokumpu Stainless AB, Avesta
Permascand AB, Ljungaverk
QE - Quality Engineering group AB, Solna
Ringhals AB, Väröbacka
Saab Kockums AB, Karlskrona
Scania CV AB, Södertälje
Skyllberg Industri AB, Skyllberg
SSAB EMEA AB, OXELÖSUND
SSB Svenska Försäljnings AB, Luleå
Strålsäkerhetsmyndigheten, Solna
Svensk Kärnbränslehantering AB, Oskarshamn
Svetskommissionen, Stockholm
Svetsmaskinservice Wesslander AB, Uddevalla
Sweden High Tech Welding Team AB, Arvika
Tetra Pak AB, Lund
Tetra Pak Processing Systems AB, Lund
Transportstyrelsen, Borlänge
TRK Kontrolladministration AB, Staffanstorp
TRK-Kvalitetsteknik AB, Stenungsund
TSE-Thermal Spraying & Engineering AB, Malmö
TÜV NORD Scandinavia AB, Helsingborg
Uddeholm Tooling AB, Hagfors
Valmet AB, SUNDSBRUK
Vattenfall Services Nordic AB, Uppsala
Vattenfall Services Nordic AB, Solna
voestalpine Böhler Welding Nordic AB, Malmö
Volvo Bussar Uddevalla AB, Uddevalla
Volvo Car Corporation, Göteborg
Volvo Construction Equipment AB, Braås
Volvo Group Trucks Technology, Göteborg
Volvo Personvagnar AB, Olofström
Show more Show less
International participation 35 international committees
ISO/TC 44, Welding and allied processes
ISO/TC 44/SC 13, Brazing materials and processes
ISO/TC 44/SC 14, Welding and brazing in aerospace
ISO/TC 44/SC 8, Equipment for gas welding, cutting and allied processes
CEN/TC 121, Welding and allied processes
SIS/TK 134/AG 01, AGS 440 Terminologi:

CEN/TC 121, Welding and allied processes

ISO/TC 44/SC 7, Representation and terms

SIS/TK 134/AG 02, AGS 442 Svetsupplysningar:

CEN/TC 121, Welding and allied processes

SIS/TK 134/AG 03, AGS 443 Tillsatsmaterial för svetsning:

CEN/TC 121, Welding and allied processes

CEN/TC 121/WG 3, Welding consumables

ISO/TC 44/SC 3, Welding consumables

SIS/TK 134/AG 05, AGS 445 Kvalifikationskrav vid svetsning:

CEN/TC 121, Welding and allied processes

CEN/TC 121/SC 4, Quality management in the field of welding

ISO/TC 44/SC 10, Quality management in the field of welding

ISO/TC 44/SC 10/WG 5, Specification and qualification of welding procedures for metallic materials

ISO/TC 44/SC 11, Qualification requirements for welding and allied processes personnel

ISO/TC 44/SC 11/WG 4, Welder qualification

ISO/TC 44/SC 11/WG 5, Revision of ISO 14732

ISO/TC 44/SC 5, Testing and inspection of welds

SIS/TK 134/AG 06, AGS 446 Kvalitetskrav för svetsade produkter:

CEN/TC 121, Welding and allied processes

ISO/TC 44/SC 10, Quality management in the field of welding

SIS/TK 134/AG 07, AGS 447 Kvalitetssäkring vid svetsning:

CEN/TC 121, Welding and allied processes

CEN/TC 121/SC 4, Quality management in the field of welding

ISO/TC 44/SC 10, Quality management in the field of welding

ISO/TC 44/SC 11/WG 2, Revision of ISO 14731

SIS/TK 134/AG 08, AGS 448 Termisk sprutning:

CEN/TC 240, Thermal spraying and thermally sprayed coatings

ISO/TC 107, Metallic and other inorganic coatings

ISO/TC 107/WG 1, Thermal spraying

SIS/TK 134/AG 09, AGS 449 Miljö, hälsa och säkerhet:

CEN/TC 121, Welding and allied processes

CEN/TC 162/WG 8, Protective gloves

ISO/TC 44/SC 9, Health and safety

ISO/TC 94/SC 13, Protective clothing

SIS/TK 134/AG 10, AGS 450 Motståndssvetsning:

CEN/TC 121, Welding and allied processes

ISO/TC 44/SC 6, Resistance welding and allied mechanical joining

SIS/TK 134/AG 12, AGS 451 Laserbearbetning:

ISO/TC 44/SC 10, Quality management in the field of welding

Show more Show less

Subjects

Manufacturing engineering (25) Welding, brazing and soldering (25.160) General (25.160.01) Welding consumables (25.160.20) Welding equipment (25.160.30) Brazing and soldering (25.160.50) Welded joints and welds (25.160.40)

För dig som är kommittédeltagare

Klicka härför att ta dig till SIS utbildningsområde om standardisering.

Klicka här för att ta dig till kommitténs digitala arbetsyta i SIS Deltagarportal. 

AG 01 - AGS 440 Terminologi
AG 02 - AGS 442 Svetsupplysningar
AG 03 - AGS 443 Tillsatsmaterial för svetsning
AG 05 - AGS 445 Kvalifikationskrav vid svetsning
AG 06 - AGS 446 Kvalitetskrav för svetsade produkter
AG 07 - AGS 447 Kvalitetssäkring vid svetsning
AG 08 - AGS 448 Termisk sprutning
AG 09 - AGS 449 Miljö, hälsa och säkerhet
AG 10 - AGS 450 Motståndssvetsning
AG 12 - AGS 451 Laserbearbetning

Contact

If you have questions or want to know more about the SIS standardization activities? Please contact us.

Mathias Lundin
Project manager
mathias.lundin@sis.se

Katarina Timåker
Project coordinator
katarina.timaker@sis.se