Standard Svensk standard · SS-EN 14460:2018

Explosiv atmosfär - Explosionstålig utrustning

Status: Gällande

Köp denna standard

Standard Svensk standard · SS-EN 14460:2018

Explosiv atmosfär - Explosionstålig utrustning
Prenumerera på standarden - Läs mer Dölj
Pris: 1 140 SEK
standard ikon pdf

PDF

Pris: 1 140 SEK
standard ikon

Papper

Pris: 1 824 SEK
standard ikon pdf + standard ikon

PDF + papper

Fler alternativ Färre alternativ
Omfattning
This European Standard specifies requirements for explosion resistant equipment which will be able to withstand an internal explosion without rupturing and will not give rise to dangerous effects to the surroundings. It is applicable to equipment (vessels and systems) where explosions are considered to be an exceptional load case.
There are two types of explosion resistant equipment: explosion pressure resistant and explosion pressure shock-resistant equipment (see Figure 1).
(...)
Explosion pressure resistant equipment is designed to withstand the explosion pressure without permanent deformation and will not give rise to dangerous effects to the surroundings. Since the design and calculation methods for explosion pressure resistant equipment are similar to those described in EN 13445-1 to -6 "Unfired pressure vessels" they are not repeated in this standard.
For explosion pressure shock resistant equipment permanent deformation is allowed provided the equipment will not give rise to dangerous effects to the surroundings. This design has been developed especially for explosion protection purposes. This standard focusses on the requirements for explosion pressure shock resistant equipment.
This standard is valid for atmospheres having absolute pressures ranging from 800 mbar to 1 100 mbar and temperatures ranging from -20 °C to +60 °C. This standard may also be helpful for the design, construction, testing and marking of equipment intended for use in atmospheres outside the validity range stated above, as far as this subject is not covered by specific standards.
This standard applies to equipment and combinations of equipment where deflagrations may occur and is not applicable to equipment and combination of equipment where detonations may occur. In this case, different design criteria for the required explosion resistance are applicable which are not covered by this standard.

Ämnesområden

Explosionsskydd (13.230) Elutrustning för explosionsfarliga miljöer (29.260.20)


Köp denna standard

Standard Svensk standard · SS-EN 14460:2018

Explosiv atmosfär - Explosionstålig utrustning
Prenumerera på standarden - Läs mer Dölj
Pris: 1 140 SEK
standard ikon pdf

PDF

Pris: 1 140 SEK
standard ikon

Papper

Pris: 1 824 SEK
standard ikon pdf + standard ikon

PDF + papper

Fler alternativ Färre alternativ

Produktinformation

Språk: Engelska

Framtagen av: SIS/SEK ATEX, SIS/TK 001

Internationell titel: Explosion resistant equipment

Artikelnummer: STD-80001047

Utgåva: 2

Fastställd: 2018-02-06

Antal sidor: 48

Ersätter: SS-EN 14460:2006