Standard Svensk standard · SS-EN ISO 15512:2019

Plast - Bestämning av vattenhalt (ISO 15512:2019)

Status: Gällande

Köp denna standard

Standard Svensk standard · SS-EN ISO 15512:2019

Plast - Bestämning av vattenhalt (ISO 15512:2019)
Prenumerera på standarden - Läs mer Dölj
Pris: 1 197 SEK
standard ikon pdf

PDF

Pris: 1 197 SEK
standard ikon

Papper

Pris: 1 915,20 SEK
standard ikon pdf + standard ikon

PDF + papper

Fler alternativ Färre alternativ
Omfattning
This document specifies methods for the determination of the water content of plastics in the form of powder, granules, and finished articles. These methods do not test for water absorption (kinetics and equilibrium) of plastics as measured by ISO 62.
Method A is suitable for the determination of water content as low as 0,1 % with an accuracy of 0,1 %. Method B and Method C are suitable for the determination of water content as low as 0,01 % with an accuracy of 0,01 %. Method D is suitable for the determination of water content as low as 0,01 % with an accuracy of 0,01 %. Method E is suitable for the determination of water content as low as 0,001 % with an accuracy of 0,001 %. The stated accuracies are detection limits which depend also on the maximal possible sample mass. The water content is expressed as a percentage mass fraction of water.
Method D is suitable for polyamide (PA), polycarbonate (PC), polypropylene (PP), polyethylene (PE), epoxy resin, polyethylene terephthalate (PET), polyester, polytetrafluoroethylene (PTFE), polyvinyl chloride (PVC), polylactide (PLA), polyamidimid (PAI), it is especially not recommended for samples which can release NH3. Methods A, B, C and E are generally suitable for all types of plastic and moisture level.
Water content is an important parameter for processing materials and is expected to remain below the level specified in the appropriate material standard.
Six alternative methods are specified in this document.
— Method A is an extraction method using anhydrous methanol followed by a Karl Fischer titration of the extracted water. It can be used for all plastics and is applicable to granules smaller than 4 mm × 4 mm × 3 mm. The method can also be used for, e.g. prepolymer materials in the form of a powder that are insoluble in methanol.
— Method B1 is a vaporization method using a tube oven. The water contained in the test portion is vaporized and carried to the titration cell by a dry air or nitrogen carrier gas, ...

Ämnesområden

Plast Allmänt (83.080.01)


Köp denna standard

Standard Svensk standard · SS-EN ISO 15512:2019

Plast - Bestämning av vattenhalt (ISO 15512:2019)
Prenumerera på standarden - Läs mer Dölj
Pris: 1 197 SEK
standard ikon pdf

PDF

Pris: 1 197 SEK
standard ikon

Papper

Pris: 1 915,20 SEK
standard ikon pdf + standard ikon

PDF + papper

Fler alternativ Färre alternativ

Produktinformation

Språk: Engelska

Framtagen av: Plast, SIS/TK 156

Internationell titel: Plastics - Determination of water content (ISO 15512:2019)

Artikelnummer: STD-80012308

Utgåva: 5

Fastställd: 2019-06-03

Antal sidor: 52

Ersätter: SS-EN ISO 15512:2016