Rörflänsar - Packningar för klassbetecknade flänsar - Del 2: Spirallindade packningar för stålflänsar
Prenumerera på standarder med tjänst SIS Abonnemang. Genom att prenumerera får du effektiv åtkomst till gällande standarder och säkerställer att ditt företag alltid har tillgång till senaste utgåvan.
Läs mer om SIS Abonnemang
This European Standard specifies the dimensions, design, types, designation, materials and marking of spiral wound gaskets for use with type A flat face or type B raised face flange facings complying with prEN 1759-1:2000 for Class designations Class 150 to Class 1500 for nominal sizes DN 15 to DN 600 and for Class designation 2 500 up to and including DN 300.
The centering rings for the spiral wound gaskets according to this standard are sized for use with imperial bolting.
The dimensions of spiral wound gaskets for tongue and groove flange facing types and spigot and recess flange facing types to prEN 1759-1:2000 are not included in this standard.
NOTE 1 Such gaskets may be available, however, for these types of flanges and the purchaser is advised to consult the manufacturer as to their availability. Similarly, for slip-on or screwed flange types the manufacturer should be consulted about availability.
NOTE 2 Dimensions of other types of gaskets for use with flanges complying with prEN 1759-1:2000 are given in prEN 12560-1:2000, prEN 12560-3:2000, prEN 12560-4:2000 and prEN 12560-5:2000, prEN 12560-6:2000 and prEN 12560-7:2000.
Rörflänsar - Packningar för klassbetecknade flänsar - Del 2: Spirallindade packningar för stålflänsar
Prenumerera på standarder med tjänst SIS Abonnemang. Genom att prenumerera får du effektiv åtkomst till gällande standarder och säkerställer att ditt företag alltid har tillgång till senaste utgåvan.
Läs mer om SIS Abonnemang