Standardization · SIS/TK 165

Förpackningar

Den svenska kommittén SIS/TK 165 Förpackningar samlar experter från hela värdekedjan för att utveckla standarder som driver effektivitet, hållbarhet och konkurrenskraft. Genom att bidra till gemensamma krav för material, funktion och provning stärker kommittén både svenska intressen internationellt och möjligheterna för en smartare, mer resurseffektiv och hållbar förpackningsindustri.

Genom att delta i SIS/TK 165 Förpackningar bidrar du till att utveckla standarder som stödjer en effektiv, säker och hållbar förpackningsvärdekedja – från material och design till användning och återvinning.

Därför ska du engagera dig

Bidra till relevanta och användbara standarder
Var med och påverka innehållet så att det fungerar i praktiken och möter behov i hela värdekedjan.
Få tidig insyn i utvecklingen
Ta del av kommande krav och trender inom till exempel cirkularitet, material och design för återvinning.
Samverka med rätt aktörer
Möt representanter från näringsliv, myndigheter och forskning med flera för kunskapsutbyte och gemensamma lösningar.
Stärk din organisations kompetens
Öka kunskapen om standardisering och utveckla arbetet inom kvalitet, hållbarhet och regelefterlevnad.

Vill du och din organisation veta mer eller vara med och delta i arbetet att påverka framtidens förpackningslösningar?
Anmäl ditt intresse eller kontakta SIS för mer information om hur du kan engagera dig i den svenska kommittén.

More information about the committèes work:

Published 316 standards

SS-ISO 22742:2026
Packaging — Linear bar code and two-dimensional symbols for product packaging (ISO 22742:2026, IDT)

SIS/TS 85:2026
Packaging — Determination of the highest possible anaerobic digestion of degradable material during controlled digestion with food waste as main substrate

SS-EN ISO 6591-1:2026
Packaging — Dimensions and method of measurement — Part 1: Empty paper sacks (ISO 6591-1:2026, IDT)

SS-EN 18120-9:2026
Packaging — Design for recycling for plastic packaging products — Part 9: Guideline and protocols for PS packaging

SS-EN 18120-1:2026
Packaging — Design for recycling for plastic packaging products — Part 1: Definitions and principles for design-for-recycling of plastic packaging

SS-EN 18120-6:2026
Packaging — Design for recycling for plastic packaging products — Part 6: Guideline and protocols for PE and PP rigid packaging

SS-EN 18120-8:2026
Packaging — Design for recycling of plastic packaging — Part 8: Guideline for PS and XPS rigid packaging

SS-EN 18120-4: 2026
Packaging — Design for recycling for plastic packaging products — Part 4: Guideline and protocols for PET bottles

SS-EN 18120-10:2026
Packaging — Design for recycling for plastic packaging products — Part 10: Recyclability evaluation process for plastic packaging — protocols for PET bottles

SS-EN 18120-15:2026
Packaging — Design for recycling for plastic packaging products — Part 15: Recyclability evaluation process for plastic packaging — Protocols for EPS packaging

SS-EN 18120-14:2026
Packaging — Design for recycling of plastic packaging — Part 14: Recyclability evaluation process for plastic packaging — Protocols for PS and XPS rigid packaging

SS-EN 18120-12:2026
Packaging — Design for recycling for plastic packaging products — Part 12: Recyclability evaluation process for plastic packaging — protocols for PE and PP rigid packaging

SS-EN 18120-13:2026
Packaging — Design for recycling for plastic packaging products — Part 13: Recyclability evaluation process for plastic packaging — protocols for PE and PP flexible packaging

SS-EN 18120-7:2026
Packaging — Design for recycling for plastic packaging products — Part 7: Guideline and protocols for PE and PP flexible packaging

SS-EN 18120-11:2026
Packaging — Design for recycling for plastic packaging products — Part 11: Recyclability evaluation process for plastic packaging — protocols for PET rigid packaging (except bottles)

SS-EN 18120-3:2026
Packaging — Design for recycling for plastic packaging products — Part 3: Sorting evaluation process for plastic packaging

SS-EN 18120-5:2026
Packaging — Design for recycling for plastic packaging products — Part 5: Guideline and protocols for PET rigid packaging (except bottles)

SS-EN ISO 17508:2025
Packaging — Transport packaging for dangerous goods — Chemical compatibility of polyethylene and coextruded plastic packagings (ISO 17508:2025, IDT)

SS-EN 12983-2:2023+A1:2025
Cookware — Domestic cookware for use on top of a stove, cooker or hob — Part 2: General requirements for ceramic cookware and glass lid

SS-EN ISO 6590-1:2024
Packaging — Terminology — Part 1: Paper sacks (ISO 6590-1:2025, IDT)

SS-EN ISO 8611-1:2025
Pallets for materials handling — Flat pallets — Part 1: Test methods (ISO 8611-1:2025, IDT)

SS-EN ISO 8611-2:2025
Pallets for materials handling — Flat pallets — Part 2: Performance requirements and selection of tests

SS-EN ISO 21898:2024
Packaging - Flexible intermediate bulk containers (FIBCs) for non-dangerous goods (ISO 21898:2023, IDT) (ISO 21898:2024, IDT)

SS 842801:2024
Wooden cable drums — Requirements and specifications on measurements and design

SS-EN ISO 7965-1:2024
Packaging - Drop test - Part 1: Paper sacks (ISO 7965-1:2023, IDT)

SS-EN 17428:2024
Packaging - Determination of the degree of disintegration under simulated home composting conditions

SS-EN 17829:2023
Glass packaging - 28 millimetre-screw finishes (MCA range) - Dimensions

SS-EN 17827:2023
Glass packaging - Finishes for sparkling wines produced by the traditional method (26 mm, 29 mm, 36 mm)

SS-EN ISO 14375:2023
Child-resistant non-reclosable packaging for pharmaceutical products - Requirements and testing (ISO 14375:2018)

SS-EN ISO 28862:2023
Packaging - Child-resistant packaging - Requirements and testing procedures for non-reclosable packages for non-pharmaceutical products (ISO 28862:2018)

SS-EN 17665:2022+A1:2023
Packaging - Test methods and requirements to demonstrate that plastic caps and lids remain attached to beverage containers

SS-EN 12983-1:2023
Cookware - Domestic cookware for use on top of a stove, cooker or hob - Part 1: General requirements

SS-EN 16592:2022
Packaging - Rigid plastic containers - PET finish 29/25 (12,6)

SS-EN 16565:2022
Packaging - Flexible tubes - Test method to determine the orientation of the flip-top cap

SS-EN 13048:2022
Packaging - Flexible aluminium tubes - Internal lacquer film thickness measurement method

SS-EN 12377:2022
Packaging - Flexible tubes - Test method for the air tightness of closures

SS-EN 12374:2022
Packaging - Flexible tubes - Terminology

SS-EN ISO 15750-3:2022
Packaging - Steel drums - Part 3: Inserted flange-type closure systems (ISO 15750-3:2022)

SS-EN 13045:2022
Packaging - Flexible cylindrical plastic tubes - Dimensions and tolerances

SS-EN 1186-3:2022
Materials and articles in contact with foodstuffs - Plastics - Part 3: Test methods for overall migration in evaporable simulants

SS-EN 1186-2:2022
Materials and articles in contact with foodstuffs - Plastics - Part 2: Test methods for overall migration in vegetable oils

SIS/WA 4:2022
Packaging — Return system for reusable packaging — Take away food and drinks

SS-EN 17427:2022
Packaging - Requirements and test scheme for carrier bags suitable for treatment in well-managed home composting installations

SS-EN ISO 16495:2022
Packaging - Transport packaging for dangerous goods - Test methods (ISO 16495:2022)

SS-EN 76:2022
Packages for certain prepacked foodstuffs - Capacities of glass and metal containers

SS-EN 13432:2000/AC:2022
Packaging - Requirements for packaging recoverable through composting and biodegradation - Test scheme and evaluation criteria for the final acceptance of packaging

SS-EN 16285:2021
Packaging - Flexible aluminium tubes - Test method to measure the deformation of the aluminium tube body (Guillotine test)

SS-EN 14854:2021
Glass packaging - Dimensions of neck finishes for aerosol and spray glass containers

SS-EN 15421:2021
Packaging - Flexible aluminium tubes - Determination of the adhesion of the internal and external protective lacquering

SS-EN ISO 21976:2020
Packaging - Tamper verification features for medicinal product packaging (ISO 21976:2018)

SS-EN 15009:2020
Aerosol containers - Compartmented aerosol dispensers

SS-EN 13834:2020
Cookware - Ovenware for use in traditional domestic ovens

SS-EN 16293:2020
Packaging - Glass Packaging - Deep BVS finishes for still wines

SS-EN ISO 12822:2020
Glass packaging - 26 H 126 crown finish - Dimensions (ISO 12822:2020)

SS-EN ISO 16106:2020
Transport packages for dangerous goods - Dangerous goods packagings, intermediate bulk containers (IBCs) and large packagings - Guidelines for the application of ISO 9001 (ISO 16106:2020)

SS-EN 14848:2020
Aerosol containers - Metal containers with 25,4 mm aperture - Dimensions of valve cups

SS-EN ISO 4180:2019
Packaging - Complete, filled transport packages - General rules for the compilation of performance test schedules (ISO 4180:2019)

SS-EN ISO 12821:2019
Glass packaging - 26 H 180 crown finish - Dimensions (ISO 12821:2019)

SS-EN 17220:2019
Packaging - Flexible aluminium tubes - Tube nozzles

SIS-CEN/TR 13695-2:2019
Packaging - Requirements for measuring and verifying the four heavy metals and other dangerous substances present in packaging, and their release into the environment - Part 2: Requirements for measuring and verifying dangerous substances present in packaging, and their release into the environment

SS-EN 17177:2019
Glass packaging - Crown cap - 26 mm diameter, 6 mm height crown cap

SS-EN ISO 20848-3:2019
Packaging - Plastics drums - Part 3: Plug bung closure systems for plastics drums with a nominal capacity of 113,6 l to 220 l (ISO 20848-3:2018)

SS-EN 12726:2018
Packaging - Cork mouth finish with a bore diameter of 18,5 mm for corks and tamper evident capsules

SS-EN ISO 17480:2018
Packaging - Accessible design - Ease of opening (ISO 17480:2015)

SS-ISO 28862:2018
Packaging - Child-resistant packaging - Requirements and testing procedures for non-reclosable packages for non-pharmaceutical products (ISO 28862:2018, IDT)

SS-EN ISO 8442-9:2018
Materials and articles in contact with foodstuffs - Cutlery and table holloware - Part 9: Requirements for ceramic knives (ISO 8442-9:2018)

SS-ISO 19809:2018
Packaging - Accessible design - Information and marking (ISO 19809:2017, IDT)

SS-EN 15507:2017
Packaging - Transport packaging for dangerous goods - Comparative material testing of polyethylene grades

SS-EN 15007:2017
Aerosol containers - Tinplate containers - Dimensions of two and three-piece cans

SS-EN 15008:2017
Aerosol containers - Aluminium containers - Dimensions of one-piece cans with 25,4 mm aperture

SS-EN ISO 13355:2017
Packaging - Complete, filled transport packages and unit loads - Vertical random vibration test (ISO 13355:2016)

SS-EN 13592:2017
Plastics sacks for household waste collection - Types, requirements and test methods

SS-EN 15384-2:2017
Packaging - Test method to determine the porosity of the internal coating of flexible aluminium tubes - Part 2: Copper sulphate test

SS-EN 15384-1:2017
Packaging - Test method to determine the porosity of the internal coating of flexible aluminium tubes - Part 1: Sodium chloride test

SS-EN 15433-6:2016
Transportation loads - Measurement and evaluation of dynamic-mechanical loads - Part 6: Automatic recording systems for measuring randomly occurring shock during monitoring of transports

SS-EN 14375:2016
Child-resistant non-reclosable packaging for pharmaceutical products - Requirements and testing

SIS-ISO/TS 18614:2016
Packaging - Label material - Required information for ordering and specifying self-adhesive labels

SS-ISO 18333:2016
Pallets for materials handling - Quality of new wooden components for flat pallets (ISO 18333:2014, IDT)

SS-EN ISO 780:2016
Packaging - Distribution packaging - Graphical symbols for handling and storage of packages (ISO 780:2015)

SS-EN ISO 8317:2015
Child-resistant packaging - Requirements and testing procedures for reclosable packages (ISO 8317:2015)

SS-EN ISO 12818:2015
Glass packaging - Standard tolerances for flaconnage (ISO 12818:2013)

SS-EN 12674-4:2015
Roll containers - Part 4: Performance requirements

SS-EN 16679:2014
Packaging - Tamper verification features for medicinal product packaging

SS-EN ISO 18613:2014
Pallets for materials handling - Repair of flat wooden pallets (ISO 18613:2014)

SS-EN 16593:2014
Packaging - Rigid plastic containers - PET finish BVS 30H60

SS-EN 16594:2014
Packaging - Rigid plastic containers - PET finish 26/22 (12,0)

SS-EN ISO 17351:2014
Packaging - Braille on packaging for medicinal products (ISO 17351:2013)

SS-EN ISO 13274:2013/AC:2014
Packaging - Transport packaging for dangerous goods - Plastics compatibility testing for packaging and IBCs - Technical Corrigendum 1 (ISO 13274:2013/Cor 1:2014)

SIS-ISO/TS 8611-4:2013
Pallets for materials handling - Flat pallets - Part 4: Procedure for predicting creep responses in stiffness tests for plastic pallets using regression analyses (ISO/TS 8611-4:2013, IDT)

SIS-ISO/TR 17370:2013
Application Guideline on Data Carriers for Supply Chain Management

SIS-ISO/TR 17350:2013
Direct Marking on Plastic Returnable Transport Items (RTIs)

SS-EN ISO 13274:2013
Packaging - Transport packaging for dangerous goods - Plastics compatibility testing for packaging and IBCs (ISO 13274:2013)

SS-EN 16292:2013
Glass packaging - Screw finishes - Depressed threads

SS-EN 16210:2013
Transportation loads - Measurement and evaluation of climatic and other loads - Data acquisition and general requirements for measuring equipment

SS-EN ISO 445:2013
Pallets for materials handling - Vocabulary (ISO 445:2013)

SS-EN 16284:2013
Packaging - Flexible laminate and plastic tubes - Test method to determine the adhesive strength of the membrane

SS-EN 16283:2013
Packaging - Flexible aluminium tubes - Test method to measure the force to pierce the membrane

SS-ISO 3394:2013
Packaging - Complete, filled transport packages and unit loads - Dimensions of rigid rectangular packages (ISO 3394:2012, IDT)

SS-EN ISO 13127:2012/AC:2012
Packaging - Child resistant packaging - Mechanical test methods for reclosable child resistant packaging systems - Technical Corrigendum 1 (ISO 13127:2012/Cor 1:2012)

SS-ISO 3676:2012
Packaging - Complete, filled transport packages and unit loads - Unit load dimensions (ISO 3676:2012, IDT)

SS-EN ISO 13127:2012
Packaging - Child resistant packaging - Mechanical test methods for reclosable child resistant packaging systems (ISO 13127:2012)

SS-EN ISO 8611-3:2012
Pallets for materials handling - Flat pallets - Part 3: Maximum working loads (ISO 8611-3:2011)

SIS-CEN/TR 16353:2012
Packaging - Safety guidelines for flexible plastic packaging to minimize the risk of suffocation to children

SS-EN 16068:2011
Packaging - Rigid plastic containers - PET finish 38

SS-EN 16065:2011
Packaging - Rigid plastic containers - PET finish 30/25 Low (16,8)

SS-EN 16067:2011
Packaging - Rigid plastic containers - PET finish 26,7 (lead 9,00)

SS-EN 16066:2011
Packaging - Rigid plastic containers - PET finish 26,7 (lead 6,35)

SS-EN 16064:2011
Packaging - Rigid plastic containers - PET finish 30/25 High (18,5)

SS-EN 16063:2011
Packaging - Rigid plastic containers - Nomenclature of plastic finishes

SS-ISO 13194:2011
Box pallets - Principal requirements and test methods (ISO 13194:2011, IDT)

SS-EN 15387:2011
Packaging - Flexible laminate tubes - Test methods to assess the strength of the side seam

SS-ISO 11156:2011
Packaging - Accessible design - General requirements (ISO 11156:2011, IDT)

SIS-CEN/TS 15945:2011
Packaging - Ease of opening - Criteria and test methods for evaluating consumer packaging

SS-ISO 18334:2010
Pallets for materials handling - Quality of assembly of new wooden pallets (ISO 18334:2010, IDT)

SIS-CEN/TR 13910:2010
Packaging - Report on criteria and methodologies for life cycle analysis of packaging

SS-EN ISO 9100-2:2005/AC:2009
Glass containers - Vacuum lug finishes - Part 2: 33 medium - Technical corrigendum 1 (ISO 9100-2:2005/ Cor 1:2009)

SS-EN 13029:2009
Packaging - Light-gauge metal packaging - Apertures for plug-in plastic closures

SS-EN ISO 9100-3:2005/AC:2009
Glass containers - Vacuum lug finishes - Part 3: 38 regular (ISO 9100-3:2005/Cor 1:2009)

SS-EN ISO 9100-4:2005/AC:2009
Glass containers - Vacuum lug finishes - Part 4: 38 medium (ISO 9100-4:2005/Cor 1:2009)

SS-ISO 16883:2009
Packaging - Transport packages for dangerous goods - Test methods for large packagings (ISO 16883:2007, IDT)

SS-EN 12714:2009
Plastic drums - Removable head (open head) drums with a nominal capacity of 25 L to 60 L

SS-EN 12707:2009
Plastics drums - Non-removable head (tight head) drums with a nominal capacity of 210 l and 225 l

SS-EN 13698-2:2009
Pallet production specification - Part 2: Construction specification for 1000 mm x 1200 mm flat wooden pallets

SS-EN 15766:2009
Packaging - Flexible aluminium tubes - Test methods to determine the polymerization of the internal coating with acetone

SS-EN 12375:2009
Packaging - Flexible aluminium tubes - Wall thickness determination method

SS-EN ISO 9100-14:2005/AC:2009
Glass containers - Vacuum lug finishes - Part 14: 110 regular (ISO 9100-14:2005/Cor 1:2008)

SS-EN 13461:2009
Packaging - Cylindrical flexible laminated tubes - Dimensions and tolerances

SS-EN 15653:2009
Packaging - Flexible aluminium tubes - Test method to check the resistance of the internal protective coating against ammonia

SS-EN 15543:2008/AC:2009
Glass packaging - Finishes for bottles - Screw thread finishes for bottles for non-carbonated liquids

SS-EN ISO 12777-1/A1:2008
Methods of test for pallet joints - Part 1: Determination of bending resistance of pallet nails, other dowel-type fasteners and staples - Amendment 1 (ISO 12777-1:1994/A1:2008)

SIS-CEN/TR 15753:2008
Packaging - Package leaflets for medicinal products - Braille and other formats for visually impaired people

SIS-CEN/TR 13688:2008
Packaging - Material recycling - Report on requirements for substances and materials to prevent a sustained impediment to recycling

SS-EN 15552:2008
Packaging - Complete, filled transport packages and unit loads - Performance testing schedules for common distribution chains

SS-EN ISO 15750-2:2008
Packaging - Steel drums - Part 2: Non-removable head (tight head) drums with a minimum total capacity of 212 l, 216,5 l and 230 l (ISO 15750-2:2002)

SS-EN ISO 15750-1:2008
Packaging - Steel drums - Part 1: Removable head (open head) drums with a minimum total capacity of 208 l, 210 l and 216,5 l (ISO 15750-1:2002)

SS-EN ISO 20848-2:2008
Packaging - Plastics drums - Part 2: Non-removable head (tight head) drums with a nominal capacity of 208,2 l and 220 l (ISO 20848-2:2006)

SS-EN ISO 20848-1:2008
Packaging - Plastics drums - Part 1: Removable head (open head) drums with a nominal capacity of 113,6 l to 220 l (ISO 20848-1:2006)

SS-EN 15543:2008
Glass packaging - Finishes for bottles - Screw thread finishes for bottles for non-carbonated liquids

SS-ISO 9058:2008
Glass containers - Standard tolerances for bottles (ISO 9058:2008, IDT)

SS-EN 15593:2008
Packaging - Management of hygiene in the production of packaging for foodstuffs - Requirements

SS-EN 15433-5:2007
Transportation loads - Measurement and evaluation of dynamic mechanical loads - Part 5: Derivation of Test Specifications

SS-EN 15433-4:2007
Transportation loads - Measurement and evaluation of dynamic mechanical loads - Part 4: Data evaluation

SS-EN 15433-3:2007
Transportation loads - Measurement and evaluation of dynamic mechanical loads - Part 3: Data validity check and data editing for evaluation

SS-EN 15433-2:2007
Transportation loads - Measurement and evaluation of dynamic mechanical loads - Part 2: Data acquisition and general requirements for measuring equipment

SS-EN 15433-1:2007
Transportation loads - Measurement and evaluation of dynamic mechanical loads - Part 1: General requirements

SIS-CEN/TR 14520:2008
Packaging - Reuse - Methods for assessing the performance of a reuse system

SS-EN 15386:2007
Packaging - Flexible laminate and plastic tubes - Test method to determine the print adhesion

SS-EN 15385:2007
Packaging - Flexible laminate tubes - Test methods to determine the strength of the head welding

SS-EN 15284:2007
Materials and articles in contact with food stuffs - Test method for the resistance to microwave heating of ceramic, glass, glass-ceramic or plastic cookware

SS-EN 15010:2006
Aerosol containers - Aluminium containers - Tolerances of the fundamental dimensions in connection with the clinch

SS-EN 15006:2006
Metal aerosol containers - Aluminium containers - Dimensions of the 25,4 mm aperture

SS-EN 12674-3:2004/AC:2006
Roll containers - Part 3: Test methods

SS-EN 12710:2006
Fibreboard drums - Removable head (open head) drums with closing rings with a nominal capacity of 15 l to 250 l

SS-EN 12875-5:2006
Mechanical dishwashing resistance of utensils - Part 5: Rapid test for ceramic catering articles

SS-EN 12875-4:2006
Mechanical dishwashing resistance of utensils - Part 4: Rapid test for domestic ceramic articles

SS-EN 15137:2006
Materials and articles in contact with foodstuffs - Certain epoxy derivatives subject to limitation - Determination of NOGE and its hydroxy and chlorinated derivatives

SS-EN 15136:2006
Materials and articles in contact with foodstuffs - Certain epoxy derivatives subject to limitation - Determination of BADGE, BFDGE and their hydroxy and chlorinated derivatives in food simulants

SS-EN 14979:2006
Packaging - Flexible plastic/metal laminate tubes - Dimensions and tolerances of nozzle S 13

SS-EN 14850:2005
Aerosol containers - Metal containers with 25,4 mm aperture - Measurement of contact height

SS-EN 14849:2005
Aerosol containers - Glass containers - Dimensions of aerosol valve ferrules

SS-EN 14847:2005
Aerosol containers - Tinplate containers - Dimensions of the 25,4 mm aperture

SS-EN 14887:2005
Glass packaging - Cork removal devices - Recommendations

SS-EN ISO 9100-4:2005
Glass containers - Vacuum lug finishes - Part 4: 38 medium (ISO 9100-4:2005)

SS-EN ISO 9100-3:2005
Glass containers - Vacuum lug finishes - Part 3: 38 regular (ISO 9100-3:2005)

SS-EN ISO 9100-2:2005
Glass containers - Vacuum lug finishes - Part 2: 33 medium (ISO 9100-2:2005)

SS-EN 13025-3:2005
Packaging - Light gauge metal containers - Part 3: Removable head (open head) round steel and tinplate containers with a nominal capacity of 20, 25 and 30 l

SS-EN 13025-2:2005
Packaging - Light gauge metal containers - Part 2: Non-removable head (tight head) round steel and tinplate containers with a nominal capacity of 20, 25 and 30 l

SS-EN 13025-1:2005
Packaging - Light gauge metal containers - Part 1: nominal filling volumes for round, cylindrical and tapered general use metal containers up to 40 000 ml

SS-EN 14916:2005
Domestic cookware - Graphical symbols (pictograms)

SS-EN 14798:2005
Glass packaging - Hand-held crown bottle openers - Dimensions

SS-EN 14867:2005
Packaging - Plastic freezer bags - Specifications and test methods

SS-EN ISO 16103:2005
Packaging - Transport packages for dangerous goods - Recycled plastics material (ISO 16103:2005)

SS-EN ISO 8442-5:2005
Materials and articles in contact with foodstuffs - Cutlery and table holloware - Part 5: Specification for sharpness and edge retention test of cutlery (ISO 8442-5:2004)

SS-EN 12875-1:2005
Mechanical dishwashing resistance of utensils - Part 1: Reference test method for domestic articles

SS-EN 12778/A1:2005
Cookware - Pressure cookers for domestic use

SS-EN 12778/AC:2005
Cookware - Pressure cookers for domestic use

SS-EN 14768:2005
Fibreboard drums - Removable head (open head) drums with slip on lids with a nominal capacity of 5 l to 600 l

SS-EN ISO 9100-10:2005
Glass containers - Vacuum lug finishes - Part 10: 77 regular (ISO 9100-10:2005)

SS-EN ISO 9100-5:2005
Glass containers - Vacuum lug finishes - Part 5: 43 and 48 regular (ISO 9100-5:2005)

SS-EN ISO 9100-14:2005
Glass containers - Vacuum lug finishes - Part 14: 110 regular (ISO 9100-14:2005)

SS-EN ISO 9100-13:2005
Glass containers - Vacuum lug finishes - Part 13: 100 regular (ISO 9100-13:2005)

SS-EN ISO 9100-12:2005
Glass containers - Vacuum lug finishes - Part 12: 89 regular (ISO 9100-12:2005)

SS-EN ISO 9100-11:2005
Glass containers - Vacuum lug finishes - Part 11: 82 regular (ISO 9100-11:2005)

SS-EN ISO 9100-8:2005
Glass containers - Vacuum lug finishes - Part 8: 63, 66 and 70 regular (ISO 9100-8:2005)

SS-EN ISO 9100-7:2005
Glass containers - Vacuum lug finishes - Part 7: 58 deep (ISO 9100-7:2005)

SS-EN ISO 9100-9:2005
Glass containers - Vacuum lug finishes - Part 9: 63, 66 and 70 deep (ISO 9100-9:2005)

SS-EN ISO 9100-6:2005
Glass containers - Vacuum lug finished - Part 6: 53 and 58 regular (ISO 9100-6:2005)

SS-EN 12674-3:2004
Roll containers - Part 3: Test methods

SS-EN 14391:2004
Packaging - Collapsible aluminium tubes - Tactile warnings of danger

SS-EN ISO 15119:2004
Packaging - Sacks - Determination of the friction of filled sacks (ISO 15119:2000)

SS-ISO 6780:2004
Flat pallets for intercontinental materials handling - Principal dimensions and tolerances (ISO 6780:2003, IDT)�

SS-EN 13429:2004
Packaging - Reuse

SS-EN 13428:2004
Packaging - Requirements specific to manufacturing and composition - Prevention by source reduction

SS-EN 13430:2004
Packaging - Requirements for packaging recoverable by material recycling

SS-EN 13427:2004
Packaging - Requirements for the use of European Standards in the field of packaging and packaging waste

SS-EN 13431:2004
Packaging - Requirements for packaging recoverable in the form of energy recovery, including specification of minimum inferior calorific value

SS-EN 14401:2004
Rigid plastics containers - Methods to test the effectiveness of closures

SS-EN 13130-7:2004
Materials and articles in contact with foodstuffs - Plastics substances subject to limitation - Part 7: Determination of monoethylene glycol and diethylene glycol in food simulants

SS-EN 13130-6:2004
Materials and articles in contact with foodstuffs - Plastics substances subject to limitation - Part 6: Determination of vinylidene chloride in plastics�

SS-EN 13130-4:2004
Materials and articles in contact with foodstuffs - Plastics substances subject to limitation - Part 4: Determination of 1,3-butadiene in plastics�

SS-EN 13130-1:2004
Materials and articles in contact with foodstuffs - Plastics substances subject to limitation - Part 1: Guide to test methods for the specific migration of substances from plastics to foods and food simulants and the determination of substances in plastics and the selection of conditions of exposure to food simulants�

SS-EN 13130-8:2004
Materials and articles in contact with foodstuffs - Plastics substances subject to limitation - Part 8: Determination of isocyanates in plastics�

SS-EN 13130-5:2004
Materials and articles in contact with foodstuffs - Plastics substances subject to limitation - Part 5: Determination of vinylidene chloride in food simulants�

SS-EN 13130-3:2004
Materials and articles in contact with foodstuffs - Plastics substances subject to limitation - Part 3: Determination of acrylonitrile in food and food simulants�

SS-EN 13130-2:2004
Materials and articles in contact with foodstuffs - Plastics substances subject to limitation - Part 2: Determination of terephthalic acid in food simulants�

SS-EN 14479:2004
Packaging - Flexible packaging material - Determination of residual solvents by dynamic headspace gas chromatography - Absolute method

SS-EN 14477:2004
Packaging - Flexible packaging material - Determination of puncture resistance - Test methods

SS-EN 14149
Packaging - Complete, filled transport packages and unit loads - Impact test by rotational drop

SS-EN ISO 15867
Intermediate bulk containers (IBCs) for non-dangerous goods - Terminology (ISO 15867:2003)

SS-EN 13698-1
Pallet production specification - Part 1: Construction specification for 800 mm x 1200 mm flat wooden pallets

SS-EN 13891
Tensional strapping - Guide to selection and use of tensional strapping

SS-EN 14054
Packaging - Paper and paperboard packaging - Design of cartons

SS-EN 14053
Packaging - Packagings manufactured from corrugated or solid fibreboard - Types and construction

SS-EN 13440
Packaging - Rate of recycling - Definition and method of calculation

SS-EN 13437
Packaging and material recycling - Criteria for recycling methods - Description of recycling processes and flow chart

SS-EN 13439
Packaging - Rate of energy recovery - Definition and method of calculation

SS-EN 13258
Materials and articles in contact with foodstuffs - Test methods for crazing resistance of ceramic articles

SS-EN 13626
Packaging - Box pallets - General requirements and test methods

SS-EN 14046
Packaging - Evaluation of the ultimate aerobic biodegradability and disintegration of packaging materials under controlled composting conditions- Method by analysis of released carbon dioxide

SS-EN 14045
Packaging - Evaluation of the disintegration of packaging materials in practical oriented tests under defined composting conditions

SS-EN 1186-1
Materials and articles in contact with foodstuffs - Plastics - Part 1: Guide to the selection of conditions and test methods for overall migration

SS-EN 13590
Packaging - Flexible carrier bags for the transport of various retail goods - General characteristics and test methods for the determination of volume and carrying capacity

SS-EN 13593
Packaging - Paper sacks for household waste collection - Types, requirements and test methods

SS-EN 13010
Packaging - Unit packaging - Dimensions and requirements for pegboard display

SS-EN 14182
Packaging - Terminology - Basic terms and definitions

SS-EN 14047
Packaging - Determination of the ultimate aerobic biodegradability of packaging materials in an aqueous medium - Method by analysis of evolved carbon dioxide

SS-EN 13248
Cookware - Coffee makers for domestic use with an independent heat source - Definitions, requirements and test methods

SS-EN 14048
Packaging - Determination of the ultimate aerobic biodegradability of packaging materials in an aqueous medium - Method by measuring the oxygen demand in a closed respirometer

SS-EN 12778
Cookware - Pressure cookers for domestic use�

SS-EN ISO 8318
Packaging - Complete, filled transport packages and unit loads - Sinusoidal vibration tests using a variable frequency (ISO 8318:2000)

SS-EN ISO 2873
Packaging - Complete, filled transport packages and unit loads - Low pressure test (ISO 2873:2000)

SS-EN ISO 2247
Packaging - Complete, filled transport packages and unit loads - Vibration tests at fixed low frequency (ISO 2247:2000)

SS-EN 13750
Domestic water kettles for use on top of stove, cooker or hob - Requirements and test methods

SS-EN ISO 2875
Packaging - Complete, filled transport packages and unit loads - Water spray test (ISO 2875:2000)

SS-EN 13973
Rigid plastics containers - Method for determination of drainability

SS-EN ISO 2244
Packaging - Complete, filled transport packages and unit loads - Horizontal impact tests (ISO 2244:2000)

SS-EN ISO 2234
Packaging - Complete, filled transport packages and unit loads - Stacking tests using a static load (ISO 2234:2000)

SS-EN 13972
Rigid plastics containers - Definition of nominal, brimful and total capacity and measurement of brimful and total capacity

SS-EN 13974
Rigid plastic containers - Specification of tolerance for dimensions, weight and volume

SS-EN 13628-2
Packaging - Flexible packaging material - Determination of residual solvents by static headspace gas chromatography - Part 2: Industrial methods

SS-EN 13628-1
Packaging - Flexible packaging material - Determination of residual solvents by static headspace gas chromatography - Part 1: Absolute methods

SS-EN 1186-13
Materials and articles in contact with foodstuffs - Plastics - Part 13: Test methods for overall migration at high temperatures

SS-EN 1186-10
Materials and articles in contact with foodstuffs - Plastics - Part 10: Test methods for overall migration into olive oil (modified method for use in cases where incomplete extraction of olive oil occurs)

SS-EN 1186-11
Materials and articles in contact with foodstuffs - Plastics - Part 11: Test methods for overall migration into mixtures of C-labelled synthetic triglycerides

SS-EN 12875-2
Mechanical dishwashing resistance of utensils - Part 2: Inspection of non-metallic articles

SS-EN 14233
Materials and articles in contact with foodstuffs - Plastics - Determination of temperature of plastics materials and articles at the plastics/food interface during microwave and conventional oven heating in order to select the appropriate temperature for migration testing

SS-EN 13028/AC:2002
Packaging - Light-gauge metal packaging - Round open-top cans for beverage products with added gas, defined by their nominal filling volumes

SS-EN 1186-2
Materials and articles in contact with foodstuffs - Plastics - Part 2: Test methods for overall migration into olive oil by total immersion

SS-EN 13545
Pallet superstructures - Pallet collars - Test methods and performance requirements

SS-EN 13382
Flat pallets for materials handling - Principal dimensions

SS-EN 12674-2
Roll containers - Part 2: General design and safety principles

SS-EN ISO 90-3
Light gauge metal containers - Definitions and determination of dimensions and capacities - Part 3: Aerosol cans (ISO 90-3:2000)

SS-EN ISO 11897
Packaging - Sacks made from thermoplastic flexible film - Tear propagation on edge folds (ISO 11897:1999)

SS-EN ISO 2233
Packaging - Complete, filled transport packages and unit loads - Conditioning for testing (ISO 2233:2000)

SS-EN 13394
Packaging - Specification for non-metallic tensional strapping

SS-EN 13393
Packaging - Specification for Edge protectors

SS-EN 13246
Packaging - Specification for tensional steel strapping

SS-EN 13247
Packaging - Specification for tensional strapping for lifting, lashing and securing of loads

SS-EN 13054
Packaging - Complete, filled transport packages - Test methods for the determination of the centre of gravity of a package

SS-EN 13028
Packaging - Light-gauge metal packaging - Round open-top cans for beverage products with or without added gas, defined by their nominal filling volumes

SS-EN 13027
Packaging - Light-gauge metal packaging - Open-top round cans defined by their nominal gross-lidded capacity

SS-EN 13026
Packaging - Light-gauge metal packaging - Nominal filling volumes for non-round, cylindrical and tapered general use metal containers up to 30 000 ml

SS-EN ISO 12048
Packaging - Complete, filled transport packages - Compression and stacking tests using a compression tester (ISO 12048:1994)

SS-EN 13432
Packaging - Requirements for packaging recoverable through composting and biodegradation - Test scheme and evaluation criteria for the final acceptance of packaging

SS-EN 13047
Packaging - Flexible conical metallic tubes - Dimensions and tolerances

SS-EN 13046
Packaging - Flexible cylindrical metallic tubes - Dimensions and tolerances

SS-EN 12546-3
Materials and articles in contact with foodstuffs - Insulated containers for domestic use - Part 3: Specification for thermal packs

SS-EN 12546-1
Materials and articles in contact with foodstuffs - Insulated containers for domestic use - Part 1: Specification for vacuum ware, insulated flasks and jugs

SS-EN 13199-2
Packaging - Small Load Carrier Systems - Part 2: Column Stackable System (CSS)

SS-EN 13199-3
Packaging - Small Load Carrier Systems - Part 3: Bond Stackable System (BSS)

SS-EN 12546-2
Materials and articles in contact with foodstuffs - Insulated containers for domestic use - Part 2: Specification for insulated bags and boxes

SS-EN 13199-1
Packaging - Small Load Carrier Systems - Part 1: Common requirements and test methods

SS-EN 13117-2
Transport packaging - Reusable, rigid plastics distribution boxes - Part 2: General specifications for testing

SS-EN 13117-1
Transport packaging - Reusable, rigid plastics distribution boxes - Part 1: General purpose application

SS-EN 13193
Packaging - Packaging and the environment - Terminology

SS-EN 13193
Packaging - Packaging and the environment - Terminology

SS-EN 12709
Plastic drums - Non-removable head (tight head) circular cross-section drums with a nominal capacity of 20 l to 120 l

SS-EN 12713
Screw cap closure systems for plastics containers with a nominal capacity of 20 l to 60 l

SS-EN 12712
Plastics jerricans - Jerricans with a nominal capacity of 20 l to 60 l for optimal utilization of pallet sizes 800 mm x 1200 mm, 1000 mm x 1200 mm and 1140 mm x 1140 mm

SS-EN 12571
Materials and articles in contact with foodstuffs - Transport units for catering containers containing prepared foodstuffs - Thermal and hygienic requirements and testing

SS-EN 13008
Steel drums - Removable head (open head) drums with a nominal capacity of 15 l to 62 l

SS-EN 13007
Steel drums - Non-removable head (tight head) drums with a nominal capacity of 20 l to 60 l

SS-EN 12674-1
Roll containers - Part 3: Test methods

SS-EN ISO 90-1
Light gauge metal containers - Definitions and determination of dimensions and capacities - Part 1: Open-top cans (ISO 90-1:1997)

SS-EN ISO 90-2
Light gauge metal containers - Definitions and determination of dimensions and capacities - Part 2: General use containers (ISO 90-2:1997)

SS-EN 1217
Materials and articles in contact with foodstuffs- Test methods for water absorption of ceramic articles

SS-EN ISO 11683
Packaging - Tactile warnings of danger - Requirements (ISO 11683:1997)

SS-EN 1184
Materials and articles in contact with foodstuffs- Test methods for translucency of ceramic articles

SS-EN 1183
Materials and articles in contact with foodstuffs - Test methods for thermal shock and thermal shock endurance

SS-EN ISO 8367-2
Packaging - Dimensional tolerances for general purpose sacks - Part 2: Sacks made from thermoplastic flexible film (ISO 8367-2:1993)

SS-EN ISO 8367-1
Packaging - Dimensional tolerances for general purpose sacks - Part 1: Paper sacks (ISO 8367-1:1993)

SS-EN ISO 8351-2
Packaging - Method of specification for sacks - Part 2: Sacks made from thermo-plastic flexible film (ISO 8351-2:1994)

SS-EN ISO 8351-1
Packaging - Method of specification for sacks - Part 1: Paper sacks (ISO 8351-1:1994)

SS-EN ISO 7965-2
Sacks - Drop test - Part 2: Sacks made from thermoplastic flexible film (ISO 7965-2:1993)

SS-EN 29009
Glass containers - Height and non-parallelism of finish with reference to container base - Test methods (ISO 9009:1991)

SS-EN 29885
Wide mouth glass containers - Deviation from top sealing surface - Test methods (ISO 9885:1991)

SS-EN 631-1
Materials and articles in contact with foodstuffs - Catering containers - Part 1: Dimensions of containers

SS-EN 26599-1
Packaging - Sacks - Conditioning for testing - Part 1: Paper sacks (ISO 6599-1:1983)

SS-EN 26590-2
Packaging - Sacks - Vocabulary and types - Part 2: Sacks made from thermoplastic flexible film (ISO6590-2:1986)

SS-EN 28768
Packaging - Complete, filled transport packages -Toppling test (ISO 8768:1987)

SS-EN 24178
Complete, filled transport packages - Distribution trials - Information to be recorded (ISO 4178:1980)

SS-EN 22876
Packaging - Complete, filled transport packages -Rolling test (ISO 2876:1985)

SS-EN 27023
Packaging - Sacks - Method of sampling empty sacks for testing (ISO 7023:1983)

SS-EN 26591-2
Packaging - Sacks - Description and method of measurement - Part 2: Empty sacks made from thermoplastic flexible film (ISO 6591:1985)

SS-EN 26590-1
Packaging - Sacks - Vocabulary and types - Part 1: Paper sacks (ISO 6590-1:1983)

SS-EN 28474
Packaging - Complete, filled transport packages -Water immersion test (ISO 8474:1986)

SS-EN 22248
Packaging - Complete, filled transport packages -Vertical impact test by dropping (ISO 2248:1985)

SS-EN 22206
Packaging - Complete, filled transport packages -Identification of parts when testing (ISO 2206:1987)

SS-ISO 8768
Packaging - Complete, filled transport packages -Toppling test

SS-ISO 2876
Packaging - Complete, filled transport packages -Rolling test

SS-ISO 2248
Packaging - Complete, filled transport packages -Vertical impact test by dropping

SS 845148
Glas jars - Finish for snap-on jars

SS 845105
Glass containers - Determination of homogenity

SS 847005
Transport packages - Module packages

SS 847004
Dimensions of rigid rectangular packages - Transport packages

SIS 847001
Pallet patterns

Show more Show less

Working group 6 workgroups

SIS/TK 165/AG 01, Rötning

SIS/TK 165/AG 03, Nationell standard Pallkragar av trä

SIS/TK 165/AG 04, Materialåtervinning

SIS/TK 165/AG 07, Säckar och påsar av papper

SIS/TK 165/AG 10, Förpackningar och Miljö - Global standard

SIS/TK 165/GAG 01, Plastförpackningar

Show more Show less

Participants 40 companies and organizations

Arbio AB, Stockholm

Avfall Sverige AB, Malmö

Billerud AB, Solna

Billerud Skog & Industri AB Gävle, Gävle

Billerud Sweden AB, Skärblacka

Cepi Eurokraft, Stockholm

Derome Träteknik AB, veddinge

Ecolean AB, Helsingborg

Emballator Packaging Innovations AB, Jönköping

Essity Hygiene and Health AB, Mölndal

European Aluminium, BRUSSELS

Funktionsrätt Sverige, Sundbyberg

GLF Pallet Group AB, Genarp

Göteborgs Stad Intraservice, Göteborg

Graphic Packaging Holding AB, Lund

Graphic Packaging International Europe NV, Zaventeem

Herrljunga Emballage, Herrljunga

IH Consulting AB, Veberöd

IKEA of Sweden AB, Älmhult

IKEM-Innovations- & kemiindustrierna i Sverige AB, Stockholm

Mondi Dynäs AB, Kramfors

Näringslivets Producentansvar i Sverige AB, Sundbyberg

Naturvårdsverket, Stockholm

Nefab Packaging Sweden AB, Alfta

Nordisk Bioplastförening, Helsingborg

Returpack-Burk Svenska AB, Norrköping

RISE Research Institutes of Sweden AB, Borås

RISE Research Institutes of Sweden AB, Stockholm

RISE Research Institutes of Sweden AB, Göteborg

SCA Forest Products AB, Sundsvall

Skruvia AB, Skruv

Smurfit Westrock Piteå AB, 941 86

Stora Enso Packaging AB, Jönköping

Svensk Plaståtervinning i Motala AB, Motala

Sveriges Konsumenter, Stockholm

Tetra Pak AB, Lund

Tetra Pak Packaging Solutions AB, Lund

TMResponsibility AB, Stockholm

Trioworld Industrier AB, Smålandsstenar

Vida Packaging AB, HESTRA

Show more Show less

International participation 35 international committees

ISO/TC 122, Packaging

ISO/TC 122/SC 3, Performance requirements and tests for means of packaging, packages and unit loads

ISO/TC 122/SC 3/WG 11, Paper bags and paper sacks

ISO/TC 122/SC 3/WG 3, Child resistant containers

ISO/TC 122/SC 3/WG 8, Transport packages for dangerous goods

ISO/TC 122/SC 4, Packaging and the environment

ISO/TC 122/SC 4/WG 10, Express packaging

ISO/TC 122/WG 5, Terminology and vocabulary

ISO/TC 122/WG 9, Accessible design for packaging

ISO/TC 186, Cutlery and table and decorative metal hollow-ware

ISO/TC 51, Pallets for unit load method of materials handling

ISO/TC 63, Glass containers

CEN/TC 194, Utensils in contact with food

CEN/TC 194/WG 1, Cookware

CEN/TC 194/WG 4, Cutlery and related items

CEN/TC 194/WG 7, Methods of test for monomers

CEN/TC 194/WG 8, Overall migration

CEN/TC 194/WG 9, Technological suitability testing methods

CEN/TC 261, Packaging

CEN/TC 261/SC 4, Packaging and Environment

CEN/TC 261/SC 4/WG 10, Design for recycling for plastic packaging products.

CEN/TC 261/SC 4/WG 2, Degradability and organic recovery of packaging and packaging materials

CEN/TC 261/SC 4/WG 3, Material recovery

CEN/TC 261/SC 4/WG 6, Prevention

CEN/TC 261/SC 4/WG 7, Reuse

CEN/TC 261/SC 4/WG 8, Heavy metals and other dangerous substances

CEN/TC 261/SC 5, Primary packaging and transport packaging

CEN/TC 261/SC 5/WG 25, Rigid plastic packaging as well as plastic caps and lids for any packaging containing plastic

CEN/TC 261/SC 5/WG 27, Child resistant packaging

CEN/TC 261/WG 1, Management standards for packaging of foodstuffs

SIS/TK 165/GAG 01, Plastförpackningar:

CEN/TC 249/WG 11, Plastics recycling

CEN/TC 261/SC 4/WG 10, Design for recycling for plastic packaging products.

CEN/TC 261/SC 4/WG 3, Material recovery

SIS/TK 165/AG 01, Rötning:

CEN/TC 261/SC 4/WG 2, Degradability and organic recovery of packaging and packaging materials

SIS/TK 165/AG 04, Materialåtervinning:

CEN/TC 261/SC 4/WG 3, Material recovery

Show more Show less

Subjects

Packaging and distribution of goods (55) Environment, health protection, safety (13) Packaging materials and accessories (55.040)

För dig som är kommittédeltagare

Klicka här för att ta dig till kommitténs digitala arbetsyta (SIS Deltagarportal).

Contact

If you have questions or want to know more about the SIS standardization activities? Please contact us.

Susanna Björk
Project manager
susanna.bjork@sis.se

Maria Andersson
Project coordinator
maria.andersson@sis.se

Mats Qvarford
Chairman
Tetra Pak Packaging Solutions AB