Standardization · SIS/TK 433

Färg och lack

Inom Europa och globalt pågår arbete med att fastställa standarder för färg- och lackproduktion samt för ytbehandling av trä, metall, betong eller puts. Över 200 standarder har arbetats fram inom området, bland annat den svenska standarden för färg- och kulörbeteckningar, NCS-systemet. Det svenska arbetet sker i vår kommitté för Färg och lack.

I Sverige startade standardiseringsarbetet inom färg och lack i början på 1970-talet. I dag deltar det svenska projektet aktivt i det europeiska och globala standardiseringsarbetet. Totalt har över 200 standarder arbetats fram inom området.

De övergripande målen med inom Färg och lack är att ta fram standarder inom:

• provningsmetoder och krav för färg och lack bl.a. för ytbehandling av betong, puts,
metall och trä,

• provningsmetoder för pigment och fyllnadsmedel,

• ett gemensamt system för klassificering och terminologi.

Projektet behandlar ej färg och lack som används för korrosionsskydd. Detta område bevakas av den tekniska kommittén Korrosion, SIS/TK 146.

More information about the committèes work:

Published 402 standards

SS-EN ISO 8501-3:2025
Preparation of steel substrates before application of paints and related products - Visual assessment of surface cleanliness - Part 3: Preparation grades of welds, edges and other areas with surface imperfections (ISO 8501-3:2024, IDT)

Language:

SS-EN ISO 11125-5:2025
Preparation of steel substrates before application of paints and related products — Test methods for metallic blast-cleaning abrasives — Part 5: Determination of percentage defective particles and of microstructure (ISO 11125-5:2025, IDT)

Language:

SS-EN ISO 11126-1:2025
Preparation of steel substrates before application of paints and related products — Specifications for non-metallic blast-cleaning abrasives — Part 1: General introduction and classification (ISO 11126-1:2025, IDT)

Language:

SS-EN ISO 6270-2:2025
Paints and varnishes — Determination of resistance to humidity — Part 2: Condensation (in-cabinet exposure with heated water reservoir) (ISO 6270-2:2025, IDT)

Language:

SS-EN ISO 19396-1:2025
Paints and varnishes — Determination of pH value — Part 1: pH sensors with glass membrane (ISO 19396-1:2024, IDT)

Language:

SS-EN ISO 19396-2:2025
Paints and varnishes — Determination of pH value — Part 2: pH sensors with ISFET technology (ISO 19396-2:2024, IDT)

Language:

SS-EN ISO 8502-5:2025
Preparation of steel substrates before application of paints and related products — Tests for the assessment of surface cleanliness — Part 5: Measurement of chloride on steel surfaces prepared for painting (ion detection tube method) (ISO 8502-5:2025, IDT)

Language:

SS-EN ISO 15715:2025
Binders for paints and varnishes — Determination of turbidity (ISO 15715:2025, IDT)

Language:

SS-EN ISO 16276-1:2025
Corrosion protection of steel structures by protective paint systems — Assessment of, and acceptance criteria for, the adhesion/cohesion (fracture strength) of a coating — Part 1: Pull-off testing (ISO 16276-1:2024, IDT)

Language:

SS-EN ISO 16276-2:2025
Corrosion protection of steel structures by protective paint systems — Assessment of, and acceptance criteria for, the adhesion/cohesion (fracture strength) of a coating — Part 2: Cross-cut testing and X-cut testing (ISO 16276-2:2025, IDT)

Language:

SS-EN ISO 7012-3:2025
Paints and varnishes — Determination of preservatives in water-dilutable coating materials — Part 3: Determination of in-can isothiazolinones with LC/UV and LC-MS-MS (ISO 7012-3:2025, IDT)

Language:

SS-EN ISO 7012-2:2025
Paints and varnishes — Determination of preservatives in water-dilutable coating materials — Part 2: Determination of in-can total formaldehyde (ISO 7012-2:2025, IDT)

Language:

SS-EN ISO 7012-1:2025
Paints and varnishes — Determination of preservatives in water-dilutable coating materials — Part 1: Determination of in-can free formaldehyde (ISO 7012-1:2025, IDT)

Language:

SS-EN ISO 9038:2025
Determination of sustained combustibility of liquids (ISO 9038:2024, IDT)

Language:

SS-EN ISO 11908:2025
Binders for paints and varnishes — Amino resins — General methods of test (ISO 11908:2024, IDT)

Language:

SS-EN ISO 8502-15:2024
Preparation of steel substrates before application of paints and related products — Tests for the assessment of surface cleanliness — Part 15: Extraction of soluble contaminants for analysis by acid extraction (ISO 8502-15:2020, IDT)

Language:

SS-EN ISO 8504-4:2024
Preparation of steel substrates before application of paints and related products — Surface preparation methods — Part 4: Acid pickling (ISO 8504-4:2022, IDT)

Language:

SS-EN ISO 11127-8:2024
Preparation of steel substrates before application of paints and related products — Test methods for non-metallic blast-cleaning abrasives — Part 8: Field determination of water-soluble chlorides (ISO 11127-8:2020, IDT)

Language:

SS-EN ISO 19397:2024
Paints and varnishes — Determination of the film thickness of coatings using an ultrasonic gauge (ISO 19397:2024, IDT)

Language:

SS-EN ISO 19403-5:2024
Paints and varnishes — Wettability — Part 5: Determination of the polar and dispersive fractions of the surface tension of liquids from contact angles measurements on a solid with only a disperse contribution to its surface energy (ISO 19403-5:2024, IDT)

Language:

SS-EN ISO 4628-3:2024
Paints and varnishes — Evaluation of quantity and size of defects, and of intensity of uniform changes in appearance — Part 3: Assessment of degree of rusting (ISO 4628-3:2024, IDT)

Language:

SIS-CEN ISO/TR 15235:2024
Preparation of steel substrates before application of paints and related products — Collected information on the effect of levels of water-soluble salt contamination (ISO/TR 15235:2001, IDT)

Language:

SS-EN ISO 19403-4:2024
Paints and varnishes — Wettability — Part 4: Determination of the polar and dispersive fractions of the surface tension of liquids from an interfacial tension (ISO 19403-4:2024, IDT)

Language:

SS-EN ISO 19403-6:2024
Paints and varnishes - Wettability - Part 6: Measurement of dynamic advancing and receding angle by changing the volume of a drop (ISO 19403‑6:2024, IDT)

Language:

SS-EN ISO 19403-7:2024
Paints and varnishes — Wettability — Part 7: Measurement of the dynamic contact angles and the roll-off angle on a tilt stage (ISO 19403-7:2024, IDT)

Language:

SIS-CEN ISO/TR 20659-1:2024
Rheological test methods — Fundamentals and interlaboratory comparisons — Part 1: Determination of the yield point (ISO/TR 20659-1:2024, IDT)

Language:

SIS-CEN ISO/TR 20659-2:2024
Rheological test methods — Fundamentals and interlaboratory comparisons — Part 2: Determination of the time-dependent structural change (thixotropy) (ISO/TR 20659-2:2024, IDT)

Language:

SIS-CEN/TS 927-15:2024
Paints and varnishes — Coating materials and coating systems for exterior wood — Part 15: Assessment of bleeding of coloured wood extractives through a coating by means of a water immersion test

Language:

SS-EN ISO 2884-1:2024
Paints and varnishes — Determination of viscosity using rotational viscometers — Part 1: Absolute viscosity measurement with cone-plate measuring geometry at high shear rates (ISO 2884-1:2024, IDT)

Language:

SS-EN ISO 19403-2:2024
Paints and varnishes — Wettability — Part 2: Determination of the surface free energy of solid surfaces by measuring the contact angle (ISO 19403-2:2024, IDT)

Language:

SS-EN ISO 19403-3:2024
Paints and varnishes — Wettability — Part 3: Determination of the surface tension of liquids using the pendant drop method (ISO 19403-3:2024, IDT)

Language:

SS-EN ISO 20427:2024
Pigments and extenders — Dispersion procedure for sedimentation-based particle sizing of suspended pigment or extender with liquid sedimentation methods (ISO 20427:2023, IDT)

Language:

SS-EN ISO 17895:2024
Paints and varnishes — Determination of volatile organic compound (VOC) — Gas-chromatographic method with headspace injection for VOC determination (ISO 17895:2024, IDT)

Language:

SS-EN ISO 2884-2:2024
Paints and varnishes — Determination of viscosity using rotational viscometers — Part 2: Relative measurement of viscosity using disc or ball spindles at specified speeds (ISO 2884-2:2024, IDT)

Language:

SS-EN ISO 1514:2024
Paints and varnishes — Standard panels for testing (ISO 1514:2024, IDT)

Language:

SIS-CEN ISO/TS 19392-6:2024
Paints and varnishes — Coating systems for wind-turbine rotor blades — Part 6: Determination and evaluation of ice adhesion using centrifuge (ISO/TS 19392-6:2023, IDT)

Language:

SIS-CEN ISO/TS 19392-5:2024
Paints and varnishes — Coating systems for wind-turbine rotor blades — Part 5: Measurement of transmittance properties of UV protective coatings (ISO/TS 19392-5:2023, IDT)

Language:

SS-EN ISO 11890-2:2020/A1:2024
Paints and varnishes — Determination of volatile organic compounds(VOC) and/or semi volatile organic compounds (SVOC) content — Part 2: Gas-chromatographic method — Amendment 1 (ISO 11890-2:2020/Amd 1:2024, IDT)

Language:

SS-EN ISO 6923:2024
Paints and varnishes — Determination of monomeric diisocyanate content in coating materials and similar products using high performance liquid chromatography with ultraviolet detection (HPLC-UV) (ISO 6923:2023, IDT)

Language:

SIS-CEN ISO/TR 5601:2024
Paints and varnishes — Determination of volatile organic compound (VOC) and/or semi-volatile organic compound (SVOC) content — Best practices for the selection of test methods (ISO/TR 5601:2023, IDT)

Language:

SS-EN ISO 11890-1:2024
Paints and varnishes — Determination of volatile organic compounds (VOC) and/or semi volatile organic compounds (SVOC) content — Part 1: Gravimetric method for VOC determination (ISO 11890-1:2024, IDT)

Language:

SS-EN 13523-3:2024
Coil coated metals - Test methods - Part 3: Colour difference and metamerism - Instrumental comparison

Language:

SS-EN 13523-21:2024
Coil coated metals - Test methods - Part 21: Evaluation of outdoor exposed panels

Language:

SS-EN 13523-12:2024
Coil coated metals - Test methods - Part 12: Resistance to scratching

Language:

SS-EN 13523-22:2024
Coil coated metals - Test methods - Part 22: Colour difference - Visual comparison

Language:

SS-EN 13523-1:2024
Coil coated metals - Test methods - Part 1: Film thickness

Language:

SS-EN 13523-8:2024
Coil coated metals - Test methods - Part 8: Resistance to salt spray (fog)

Language:

SS-EN 13523-29:2024
Coil coated metals - Test methods - Part 29: Resistance to environmental soiling (Dirt pick-up and striping)

Language:

SS-EN 13523-10:2024
Coil coated metals - Test methods - Part 10: Resistance to fluorescent UV radiation and water condensation

Language:

SS-EN ISO 4628-10:2024
Paints and varnishes — Evaluation of quantity and size of defects, and of intensity of uniform changes in appearance — Part 10: Assessment of degree of filiform corrosion (ISO 4628-10:2024)

Language:

SS-EN ISO 3549:2024
Zinc dust pigments for paints - Specifications and test methods (ISO 3549:2024, IDT)

Language:

SIS-ISO/TR 5604:2024
Electrochemical noise measurement for assessing the protection of metal afforded by organic coatings (SIS-ISO/TR 5604:2024, IDT)

Language:

SS-EN ISO 20567-4:2024
Paints and varnishes — Determination of stone-chip resistance of coatings — Part 4: Mobile multi-impact testing on a small testing area (ISO 20567-4:2023, IDT)

Language:

SS-EN ISO 18314-4:2024
Analytical colorimetry - Part 4: Metamerism index for pairs of samples for change of illuminant (ISO 18314-4:2024)

Language:

SS-EN ISO 3262-10:2024
Extenders - Specifications and methods of test - Part 10: Natural talc/chlorite in lamellar form (ISO 3262-10:2024)

Language:

SS-EN ISO 3262-11:2024
Extenders - Specifications and methods of test - Part 11: Natural talc, in lamellar form, containing carbonates (ISO 3262-11:2024)

Language:

SS-EN ISO 3262-17:2024
Extenders - Specifications and methods of test - Part 17: Precipitated calcium silicate (ISO 3262-17:2024)

Language:

SS-EN ISO 8130-15:2023
Coating powders - Part 15: Rheology (ISO 8130-15:2023)

Language:

SS-EN 13523-23:2023
Coil coated metals - Test methods - Part 23: Resistance to humid atmospheres containing sulfur dioxide

Language:

SS-EN ISO 2811-3:2023
Paints and varnishes - Determination of density - Part 3: Oscillation method (ISO 2811-3:2023)

Language:

SS-EN ISO 11997-3:2023
Paints and varnishes - Determination of resistance to cyclic corrosion conditions - Part 3: Testing of coating systems on materials and components in automotive construction (ISO 11997-3:2022)

Language:

SS-EN ISO 4628-6:2023
Paints and varnishes - Evaluation of quantity and size of defects, and of intensity of uniform changes in appearance - Part 6: Assessment of degree of chalking by tape method (ISO 4628-6:2023)

Language:

SS-EN ISO 8130-16:2023
Coating powders - Part 16: Determination of density by liquid displacement in a measuring cylinder (ISO 8130-16:2022)

Language:

SS-EN ISO 22553-15:2023
Paints and varnishes - Electro-deposition coatings - Part 15: Permeate residues (ISO 22553-15:2022)

Language:

SS-EN ISO 22553-16:2023
Paints and varnishes - Electro-deposition coatings - Part 16: Pigment-binder ratio (ISO 22553-16:2022)

Language:

SS-EN ISO 3262-7:2023
Extenders - Specifications and methods of test - Part 7: Dolomite (ISO 3262-7:2023)

Language:

SS-EN ISO 3262-9:2023
Extenders - Specifications and methods of test - Part 9: Calcined clay (ISO 3262-9:2023)

Language:

SS-EN ISO 3262-14:2023
Extenders - Specifications and methods of test - Part 14: Cristobalite (ISO 3262-14:2023)

Language:

SS-EN ISO 3262-18:2023
Extenders - Specifications and methods of test - Part 18: Precipitated sodium aluminium silicate (ISO 3262-18:2023)

Language:

SS-ISO 4626:2023
Volatile organic liquids — Determination of boiling range of organic solvents used as raw materials (ISO 4626:2023, IDT)

Language:

SS-EN ISO 18473-4:2023
Functional pigments and extenders for special applications - Part 4: Nanoscale titanium dioxide for photocatalytic application (ISO 18473-4:2022)

Language:

SS-EN ISO 3262-12:2023
Extenders - Specifications and methods of test - Part 12: Muscovite-type mica (ISO 3262-12:2023)

Language:

SS-EN ISO 3262-22:2023
Extenders - Specifications and methods of test - Part 22: Flux-calcined kieselguhr (ISO 3262-22:2023)

Language:

SS-EN ISO 20567-2:2023
Paints and varnishes - Determination of stone-chip resistance of coatings - Part 2: Single-impact test with a guided impact body (ISO 20567-2:2023)

Language:

SS-EN ISO 3262-3:2023
Extenders - Specifications and methods of test - Part 3: Blanc fixe (ISO 3262-3:2023)

Language:

SS-EN ISO 1247-2:2023
Aluminium pigments for paints - Part 2: Vacuum metallized aluminium pigments (ISO 1247-2:2021)

Language:

SS-EN ISO 1247-1:2023
Aluminium pigments for paints - Part 1: General aluminium pigments (ISO 1247-1:2021)

Language:

SS-EN ISO 3262-4:2023
Extenders - Specifications and methods of test - Part 4: Whiting (ISO 3262-4:2023)

Language:

SS-EN ISO 3262-2:2023
Extenders for paints - Specifications and methods of test - Part 2: Baryte (natural barium sulfate) (ISO 3262-2:2023)

Language:

SS-EN ISO 3262-5:2023
Extenders - Specifications and methods of test - Part 5: Natural crystalline calcium carbonate (ISO 3262-5:2023)

Language:

SS-EN ISO 4624:2023
Paints and varnishes - Pull-off test for adhesion (ISO 4624:2023)

Language:

SS-EN ISO 3262-8:2023
Extenders - Specifications and methods of test - Part 8: Natural clay (ISO 3262-8:2023, Corrected version 2023-11)

Language:

SS-EN ISO 3262-21:2023
Extenders - Specifications and methods of test - Part 21: Silica sand (unground natural quartz) (ISO 3262-21:2023)

Language:

SS-EN ISO 3262-15:2023
Extenders - Specifications and methods of test - Part 15: Vitreous silica (ISO 3262-15:2023)

Language:

SS-EN ISO 3262-13:2023
Extenders - Specifications and methods of test - Part 13: Natural quartz (ground) (ISO 3262-13:2023)

Language:

SS-EN ISO 3262-16:2023
Extenders - Specifications and methods of test - Part 16: Aluminium hydroxides (ISO 3262-16:2023)

Language:

SS-EN 927-5:2023
Paints and varnishes - Coating materials and coating systems for exterior wood - Part 5: Assessment of the liquid water permeability

Language:

SIS-CEN/TS 927-12:2023
Paints and varnishes - Coating materials and coating systems for exterior wood - Part 12: Ultraviolet and visible radiation transmittance

Language:

SS-ISO 6270-3:2023
Paints and varnishes - Determination of resistance to humidity - Part 3: Condensation (in-cabinet exposure with heated, bubbling water reservoir) (ISO 6270-3:2018, IDT)

Language:

SS-EN 13523-14:2023
Coil coated metals - Test methods - Part 14: Chalking (Helmen method)

Language:

SS-EN ISO 4618:2023
Paints and varnishes - Vocabulary (ISO 4618:2023)

Language:

SS-EN ISO 7784-1:2023
Paints and varnishes - Determination of resistance to abrasion - Part 1: Method with abrasive-paper covered wheels and rotating test specimen (ISO 7784-1:2023)

Language:

SS-EN ISO 7142:2023
Binders for paints and varnishes - Epoxy resins - General methods of test (ISO 7142:2023)

Language:

SS-EN ISO 7784-2:2023
Paints and varnishes - Determination of resistance to abrasion - Part 2: Method with abrasive rubber wheels and rotating test specimen (ISO 7784-2:2023)

Language:

SS-EN ISO 1518-1:2023
Paints and varnishes - Determination of scratch resistance - Part 1: Constant-loading method (ISO 1518-1:2023)

Language:

SS-EN ISO 2811-1:2023
Paints and varnishes - Determination of density - Part 1: Pycnometer method (ISO 2811-1:2023)

Language:

SIS-CEN/TS 927-9:2023
Paints and varnishes - Coating materials and coating systems for exterior wood - Part 9: Determination of pull-off strength

Language:

SS-EN 16105:2023
Paints and varnishes - Laboratory method for determination of release of regulated dangerous substances from coatings in intermittent contact with water

Language:

SS-EN ISO 22553-10:2023
Paints and varnishes - Electro-deposition coatings - Part 10: Edge protection (ISO 22553-10:2022)

Language:

SS-EN 927-14:2023
Paints and varnishes - Coating materials and coating systems for exterior wood - Part 14: Determination of tensile properties of coating films

Language:

SS-EN ISO 18314-2:2023
Analytical colorimetry - Part 2: Saunderson correction, solutions of the Kubelka-Munk equation, tinting strength, depth of shade, hiding power (ISO 18314-2:2023)

Language:

SS 31411:2022
Colours for coding purposes

Language:

SS-EN ISO 3262-6:2022
Extenders - Specifications and methods of test - Part 6: Precipitated calcium carbonate (ISO 3262-6:2022)

Language:

SS-EN ISO 18314-3:2022
Analytical colorimetry - Part 3: Special indices (ISO 18314-3:2022)

Language:

SIS-CEN ISO/TR 11594:2022
Best practices for the creation/evaluation of fingerprint analysis in accordance with the ISO 28199 series (ISO/TR 11594:2022)

Language:

SIS-CEN ISO/TR 5602:2022
Sources of error in the use of electrochemical impedance spectroscopy for the investigation of coatings and other materials (ISO/TR 5602:2021)

Language:

SS-EN ISO 4628-5:2022
Paints and varnishes - Evaluation of degradation of coatings - Designation of quantity and size of defects, and of intensity of uniform changes in appearance - Part 5: Assessment of degree of flaking (ISO 4628-5:2022)

Language:

SS-EN 13300:2022
Paints and varnishes - Paints and varnishes for interior walls and ceilings - Classification

Language:

SS-EN ISO 1522:2022
Paints and varnishes - Pendulum damping test (ISO 1522:2022)

Language:

SS-EN 927-2:2022
Paints and varnishes - Coating materials and coating systems for exterior wood - Part 2: Performance specification

Language:

SS-EN ISO 7784-3:2022
Paints and varnishes - Determination of resistance to abrasion - Part 3: Method with abrasive-paper covered wheel and linearly reciprocating test specimen (ISO 7784-3:2022)

Language:

SS-EN ISO 11127-6:2022
Preparation of steel substrates before application of paints and related products - Test methods for non-metallic blast-cleaning abrasives - Part 6: Determination of water-soluble contaminants by conductivity measurement (ISO 11127-6:2022)

Language:

SS-ISO 16053:2022
Paints and varnishes — Coating materials and coating systems for exterior wood — Natural weathering test (ISO 16053:2022, IDT)

Language:

SS-EN ISO 23157:2022
Determination of the silanol group content on the surface of fumed silica - Reaction gas chromatographic method (ISO 23157:2021)

Language:

SS-EN ISO 16474-2:2013/A1:2022
Paints and varnishes - Methods of exposure to laboratory light sources - Part 2: Xenon-arc lamps - Amendment 1: Classification of daylight filters (ISO 16474-2:2013/Amd 1:2022)

Language:

SIS-CEN ISO/TS 19392-1:2022
Paints and varnishes - Coating systems for wind-turbine rotor blades - Part 1: Minimum requirements and weathering (ISO/TS 19392-1:2018)

Language:

SIS-CEN ISO/TS 19392-3:2022
Paints and varnishes - Coating systems for wind-turbine rotor blades - Part 3: Determination and evaluation of resistance to rain erosion using water jet (ISO/TS 19392-3:2018)

Language:

SIS-CEN ISO/TS 19392-2:2022
Paints and varnishes - Coating systems for wind-turbine rotor blades - Part 2: Determination and evaluation of resistance to rain erosion using rotating arm (ISO/TS 19392-2:2018)

Language:

SS-EN ISO 19403-1:2022
Paints and varnishes - Wettability - Part 1: Vocabulary and general principles (ISO 19403-1:2022)

Language:

SS-EN ISO 11125-9:2022
Preparation of steel substrates before application of paints and related products - Test methods for metallic blast-cleaning abrasives - Part 9: Wear testing and performance (ISO 11125-9:2021)

Language:

SS-EN ISO 16925:2022
Paints and varnishes - Determination of the resistance of coatings to pressure water-jetting (ISO 16925:2021)

Language:

SS-EN ISO 8130-4:2022
Coating powders - Part 4: Calculation of lower explosion limit (ISO 8130-4:2021)

Language:

SS-EN 15457:2022
Paints and varnishes - Laboratory method for testing the efficacy of film preservatives in a coating against fungi

Language:

SS-EN ISO 788:2022
Ultramarine pigments (ISO 788:2021)

Language:

SS-EN 15458:2022
Paints and varnishes - Laboratory method for testing the efficacy of film preservatives in a coating against algae

Language:

SS 19102:2022
NCS COLOUR ATLAS

Language:

SS-EN 13523-9:2022
Coil coated metals - Test methods - Part 9: Resistance to water immersion

Language:

SS-EN 13523-26:2022
Coil coated metals - Test methods - Part 26: Resistance to condensation of water

Language:

SS-EN 13523-25:2022
Coil coated metals - Test methods - Part 25: Resistance to humidity

Language:

SS-EN ISO 17463:2022
Paints and varnishes - Guidelines for the determination of anticorrosive properties of organic coatings by accelerated cyclic electrochemical technique (ISO 17463:2022)

Language:

SS-EN ISO 23322:2021
Paints and varnishes - Determination of solvents in coating materials containing organic solvents only - Gas-chromatographic method (ISO 23322:2021)

Language:

SS-EN ISO 22553-14:2021
Paints and varnishes - Electro-deposition coatings - Part 14: Deposition behaviour (ISO 22553-14:2021)

Language:

SS-EN ISO 22553-13:2021
Paints and varnishes - Electro-deposition coatings - Part 13: Determination of re-solving behaviour (ISO 22553-13:2021)

Language:

SS-EN 13523-7:2021
Coil coated metals - Test methods - Part 7: Resistance to cracking on bending (T-bend test)

Language:

SS-EN 13523-0:2021
Coil coated metals - Test methods - Part 0: General introduction

Language:

SS-EN 13523-2:2021
Coil coated metals - Test methods - Part 2: Gloss

Language:

SS-EN ISO 22553-9:2021
Paints and varnishes - Electro-deposition coatings - Part 9: Stoving loss (ISO 22553-9:2020)

Language:

SS-EN ISO 22553-12:2021
Paints and varnishes - Electro-deposition coatings - Part 12: Sedimentation on horizontal areas (ISO 22553-12:2020)

Language:

SS-EN ISO 22553-11:2021
Paints and varnishes - Electro-deposition coatings - Part 11: Bath stability (ISO 22553-11:2020)

Language:

SS-EN ISO 22553-7:2021
Paints and varnishes - Electro-deposition coatings - Part 7: Electrical wet-film resistance (ISO 22553-7:2020)

Language:

SS-EN ISO 22553-8:2021
Paints and varnishes - Electro-deposition coatings - Part 8: Electric charge density (ISO 22553-8:2020)

Language:

SS-EN ISO 13885-3:2021
Gel permeation chromatography (GPC) - Part 3: Water as eluent (ISO 13885-3:2020)

Language:

SS-EN ISO 13885-2:2021
Gel permeation chromatography (GPC) - Part 2: N,N-Dimenthylacetamide (DMAC) as eluent (ISO 13885-2:2020)

Language:

SS-EN ISO 13885-1:2021
Gel permeation chromatography (GPC) - Part 1: Tetrahydrofuran (THF) as eluent (ISO 13885-1:2020)

Language:

SS-EN ISO 787-2:2021
General methods of test for pigments and extenders - Part 2: Determination of matter volatile at 105 °C (ISO 787-2:2021)

Language:

SS-EN ISO 8130-5:2021
Coating powders - Part 5: Determination of flow properties of a powder/air mixture (ISO 8130-5:2021)

Language:

SS-EN ISO 8130-6:2021
Coating powders - Part 6: Determination of gel time of thermosetting coating powders at a given temperature (ISO 8130-6:2021)

Language:

SS-EN ISO 8130-3:2021
Coating powders - Part 3: Determination of density by liquid displacement pyknometer (ISO 8130-3:2021)

Language:

SS-EN ISO 8130-2:2021
Coating powders - Part 2: Determination of density by gas comparison pyknometer (referee method) (ISO 8130-2:2021)

Language:

SS-EN ISO 8130-10:2021
Coating powders - Part 10: Determination of deposition efficiency (ISO 8130-10:2021)

Language:

SS-EN ISO 8130-8:2021
Coating powders - Part 8: Assessment of the storage stability of thermosetting powders (ISO 8130-8:2021)

Language:

SS-EN ISO 28199-2:2021
Paints and varnishes - Evaluation of properties of coating systems related to the spray application process - Part 2: Colour stability, process hiding power, re-dissolving, overspray absorption, wetting, surface texture and mottling (ISO 28199-2:2021)

Language:

SS-EN ISO 28199-3:2021
Paints and varnishes - Evaluation of properties of coating systems related to the spray application process - Part 3: Assessment of sagging, formation of bubbles, pinholing and hiding power (ISO 28199-3:2021)

Language:

SIS-CEN/TS 16360:2021
Paints and varnishes - Coating materials and coating systems for exterior wood - Assessment of film extensibility by indentation of a coating on a wooden substrate

Language:

SS-EN ISO 3219-2:2021
Rheology - Part 2: General principles of rotational and oscillatory rheometry (ISO 3219-2:2021)

Language:

SS-EN ISO 3219-1:2021
Rheology - Part 1: Vocabulary and symbols for rotational and oscillatory rheometry (ISO 3219-1:2021)

Language:

SS-EN ISO 276:2021
Binders for paints and varnishes - Linseed stand oil - Requirements and methods of test (ISO 276:2019)

Language:

SS-EN 12206-1:2021
Paints and varnishes - Coating of aluminium and aluminium alloys for architectural purposes - Part 1: Coatings prepared from thermosetting coating powder

Language:

SS-EN ISO 28199-1:2021
Paints and varnishes - Evaluation of properties of coating systems related to the spray application process - Part 1: Vocabulary and preparation of test panels (ISO 28199-1:2021)

Language:

SS-EN ISO 3262-19:2021
Extenders - Specifications and methods of test - Part 19: Precipitated silica (ISO 3262-19:2021)

Language:

SS-EN ISO 3262-20:2021
Extenders - Specifications and methods of test - Part 20: Fumed silica (ISO 3262-20:2021)

Language:

SS-EN ISO 20566:2021
Paints and varnishes - Determination of the scratch resistance of a coating system using a laboratory-scale car-wash (ISO 20566:2019)

Language:

SS-EN ISO 16474-3:2021
Paints and varnishes - Methods of exposure to laboratory light sources - Part 3: Fluorescent UV lamps (ISO 16474-3:2021)

Language:

SS-EN ISO 22553-1:2021
Paints and varnishes - Electro-deposition coatings - Part 1: Vocabulary (ISO 22553-1:2019)

Language:

SS-EN ISO 22553-5:2021
Paints and varnishes - Electro-deposition coatings - Part 5: Determination of sieve residue (ISO 22553-5:2019)

Language:

SS-EN ISO 22553-4:2021
Paints and varnishes - Electro-deposition coatings - Part 4: Compatibility of electro-deposition coating materials with liquid, paste-like and solid foreign materials (ISO 22553-4:2019)

Language:

SS-EN ISO 22553-2:2021
Paints and varnishes - Electro-deposition coatings - Part 2: Throwing power (ISO 22553-2:2019)

Language:

SS-EN ISO 22553-6:2021
Paints and varnishes - Electro-deposition coatings - Part 6: Entry marks (ISO 22553-6:2019)

Language:

SS-EN ISO 22553-3:2021
Paints and varnishes - Electro-deposition coatings - Part 3: Compatibility of electro-deposition coating materials with a reference oil (ISO 22553-3:2019)

Language:

SS-EN ISO 21546:2021
Paints and varnishes - Determination of the resistance to rubbing using a linear abrasion tester (crockmeter) (ISO 21546:2019)

Language:

SS-EN ISO 22969:2020
Paints and varnishes - Determination of solar reflectance (ISO 22969:2019)

Language:

SS-EN ISO 20266:2020
Paints and varnishes - Determination of image clarity (degree of sharpness of reflected or transmitted image) (ISO 20266:2018)

Language:

SS-EN ISO 22970:2020
Paints and varnishes - Test method for evaluation of adhesion of elastic adhesives on coatings by peel test, peel strength test and tensile lap-shear strength test with additional stress by condensation test or cataplasm storage (ISO 22970:2019)

Language:

SS-EN ISO 22557:2020
Paints and varnishes - Scratch test using a spring-loaded pen (ISO 22557:2019)

Language:

SS-EN ISO 22518:2020
Paints and varnishes - Determination of solvents in water-thinnable coating materials - Gas-chromatographic method (ISO 22518:2019)

Language:

SS-EN ISO 23321:2020
Solvents for paints and varnishes - Demineralized water for industrial applications - Specification and test methods (ISO 23321:2019)

Language:

SS-EN ISO 22516:2020
Paints and varnishes - Practical determination of non-volatile and volatile matter content during application (ISO 22516:2019)

Language:

SS-EN ISO 23168:2020
Paints and varnishes - Determination of water content - Gas-chromatographic method (ISO 23168:2019)

Language:

SS-EN ISO 21545:2020
Paints and varnishes - Determination of settling (ISO 21545:2018)

Language:

SS-EN ISO 787-28:2020
General methods of tests for pigments and extenders - Part 28: Determination of total content of polychlorinated biphenyls (PCB) by dissolution, cleanup and GC-MS (ISO 787-28:2019)

Language:

SS-EN ISO 473:2020
Lithopone pigments - General requirements and methods of testing (ISO 473:2019)

Language:

SS-EN ISO 2810:2020
Paints and varnishes - Natural weathering of coatings - Exposure and assessment (ISO 2810:2020)

Language:

SS-EN ISO 15528:2020
Paints, varnishes and raw materials for paints and varnishes - Sampling (ISO 15528:2020)

Language:

SS-EN ISO 2409:2020
Paints and varnishes - Cross-cut test (ISO 2409:2020)

Language:

SS-EN ISO 21683:2020
Pigments and extenders - Determination of experimentally simulated nano-object release from paints, varnishes and pigmented plastics (ISO 21683:2019)

Language:

SS-EN ISO 4629-3:2020
Binders for paints and varnishes - Determination of hydroxyl value - Part 3: Rapid test (ISO 4629-3:2018)

Language:

SS-EN ISO 4625-1:2020
Binders for paints and varnishes - Determination of softening point - Part 1: Ring-and-ball method (ISO 4625-1:2020)

Language:

SS-EN ISO 11890-2:2020
Paints and varnishes - Determination of volatile organic compounds(VOC) and/or semi volatile organic compounds (SVOC) content - Part 2: Gas-chromatographic method (ISO 11890-2:2020)

Language:

SS-EN ISO 1524:2020
Paints, varnishes and printing inks - Determination of fineness of grind (ISO 1524:2020)

Language:

SS-EN 13523-6:2020
Coil coated metals - Test methods - Part 6: Adhesion after indentation (cupping test)

Language:

SS-EN 13523-20:2020
Coil coated metals - Test methods - Part 20: Foam adhesion

Language:

SS-EN 13523-18:2020
Coil coated metals - Test methods - Part 18: Resistance to staining

Language:

SS-EN ISO 787-19:2020
General methods of test for pigments - Part 19: Determination of water-soluble nitrates (Salicylic acid method) (ISO 787-19:2020)

Language:

SS-EN 927-11:2020
Paints and varnishes - Coating materials and coating systems for exterior wood - Part 11: Assessment of air inclusions/microfoam in coating films

Language:

SS-EN 927-7:2020
Paints and varnishes - Coating materials and coating systems for exterior wood - Part 7: Assessment of knot staining resistance of wood coatings

Language:

SS-EN ISO 3262-1:2020
Extenders - Specifications and methods of test - Part 1: Introduction and general test methods (ISO 3262-1:2020)

Language:

SIS-CEN/TS 927-8:2020
Paints and varnishes - Coating materials and coating systems for exterior wood - Part 8: Determination of the adhesion on wood after water exposure by a double-X-cut test

Language:

SS-EN ISO 3668:2020
Paints and varnishes - Visual comparison of colour of paints (ISO 3668:2017)

Language:

SS-EN ISO 15184:2020
Paints and varnishes - Determination of film hardness by pencil test (ISO 15184:2020)

Language:

SS-EN ISO 15091:2020
Paints and varnishes - Determination of electrical conductivity and resistance (ISO 15091:2020)

Language:

SS-EN ISO 6504-3:2020
Paints and varnishes - Determination of hiding power - Part 3: Determination of hiding power of paints for masonry, concrete and interior use (ISO 6504-3:2019)

Language:

SS-EN ISO 8504-2:2019
Preparation of steel substrates before application of paints and related products - Surface preparation methods - Part 2: Abrasive blast-cleaning (ISO 8504-2:2019)

Language:

SS-EN ISO 3233-1:2019
Paints and varnishes - Determination of percentage volume of non-volatile matter - Part 1: Method using a coated test panel to determine non-volatile matter and to determine dry-film density by the Archimedes principle (ISO 3233-1:2019)

Language:

SS-EN ISO 13076:2019
Paints and varnishes - Lighting and procedure for visual assessments of coatings (ISO 13076:2019)

Language:

SS-EN ISO 17872:2019
Paints and varnishes - Guidelines for the introduction of scribe marks through coatings on metallic panels for corrosion testing (ISO 17872:2019)

Language:

SS-EN ISO 3233-2:2019
Paints and varnishes - Determination of the percentage volume of non-volatile matter - Part 2: Method using the determination of non-volatile-matter content in accordance with ISO 3251 and determination of dry film density on coated test panels by the Archimedes principle (ISO 3233-2:2019)

Language:

SS-EN ISO 787-15:2019
General methods of test for pigments and extenders - Part 15: Comparison of resistance to light of coloured pigments of similar types (ISO 787-15:2019)

Language:

SS-EN ISO 787-13:2019
General methods of test for pigments and extenders - Part 13: Determination of water-soluble sulfates, chlorides and nitrates (ISO 787-13:2019)

Language:

SS-EN 927-13:2019
Paints and varnishes - Coating materials and coating systems for exterior wood - Part 13: Assessment of resistance to impact of a coating on a wooden substrate

Language:

SS-EN 927-3:2019
Paints and varnishes - Coating materials and coating systems for exterior wood - Part 3: Natural weathering test

Language:

SS-EN ISO 2808:2019
Paints and varnishes - Determination of film thickness (ISO 2808:2019)

Language:

SS-EN 13523-19:2019
Coil coated metals - Test methods - Part 19: Panel design and method of atmospheric exposure testing

Language:

SS-EN 13523-17:2019
Coil coated metals - Test methods - Part 17: Adhesion of strippable films

Language:

SS-EN 16074:2019
Paints and varnishes - Determination of non-volatile-matter content and spreading rate of coil coating materials

Language:

SS-EN 13523-11:2019
Coil coated metals - Test methods - Part 11: Resistance to solvents (rubbing test)

Language:

SS-ISO 23496:2019
Determination of pH value - Reference buffer solutions for the calibration of pH measuring equipment (ISO 23496:2019, IDT)

Language:

SS-EN ISO 2431:2019
Paints and varnishes - Determination of flow time by use of flow cups (ISO 2431:2019)

Language:

SS-EN ISO 1518-2:2019
Paints and varnishes - Determination of scratch resistance - Part 2: Variable-loading method (ISO 1518-2:2019)

Language:

SS-EN ISO 9514:2019
Paints and varnishes - Determination of the pot life of multicomponent coating systems - Preparation and conditioning of samples and guidelines for testing (ISO 9514:2019)

Language:

SS-EN ISO 18473-3:2019
Functional pigments and extenders for special application - Part 3: Fumed silica for silicone rubber application (ISO 18473-3:2018)

Language:

SS-EN ISO 6504-1:2019
Paints and varnishes - Determination of hiding power - Part 1: Kubelka-Munk method for white and light-coloured paints (ISO 6504-1:2019)

Language:

SS-EN ISO 3251:2019
Paints, varnishes and plastics - Determination of non-volatile-matter content (ISO 3251:2019)

Language:

SS-EN ISO 16014-5:2019
Plastics - Determination of average molecular weight and molecular weight distribution of polymers using size-exclusion chromatography - Part 5: Light-scattering method (ISO 16014-5:2019)

Language:

SS-EN ISO 18451-1:2019
Pigments, dyestuffs and extenders - Terminology - Part 1: General terms (ISO 18451-1:2019)

Language:

SS-EN ISO 787-17:2019
General methods of test for pigments and extenders - Part 17: Comparison of lightening power of white pigments (ISO 787-17:2019)

Language:

SS-EN ISO 8130-11:2019
Coating powders - Part 11: Inclined-plane flow test (ISO 8130-11:2019)

Language:

SS-EN ISO 2812-3:2019
Paints and varnishes - Determination of resistance to liquids - Part 3: Method using an absorbent medium (ISO 2812-3:2019)

Language:

SS-EN ISO 8130-7:2019
Coating powders - Part 7: Determination of loss of mass on stoving (ISO 8130-7:2019)

Language:

SS-EN ISO 8130-12:2019
Coating powders - Part 12: Determination of compatibility (ISO 8130-12:2019)

Language:

SS-EN ISO 8130-13:2019
Coating powders - Part 13: Particle size analysis by laser diffraction (ISO 8130-13:2019)

Language:

SS-EN ISO 8130-14:2019
Coating powders - Part 14: Vocabulary (ISO 8130-14:2019)

Language:

SS-EN ISO 8130-1:2019
Coating powders - Part 1: Determination of particle size distribution by sieving (ISO 8130-1:2019)

Language:

SS-EN 927-10:2019
Paints and varnishes - Coating materials and coating systems for exterior wood - Part 10: Resistance to blocking of paints and varnishes on wood

Language:

SS-EN ISO 787-9:2019
General methods of test for pigments and extenders - Part 9: Determination of pH value of an aqueous suspension (ISO 787-9:2019)

Language:

SS-EN ISO 787-14:2019
General methods of test for pigments and extenders - Part 14: Determination of resistivity of aqueous extract (ISO 787-14:2019)

Language:

SS-EN ISO 787-25:2019
General methods of test for pigments and extenders - Part 25: Comparison of the colour, in full-shade systems, of white, black and coloured pigments - Colorimetric method (ISO 787-25:2019)

Language:

SS-EN 16402:2019
Paints and varnishes - Assessment of emissions of substances from coatings into indoor air - Sampling, conditioning and testing

Language:

SS-EN ISO 4619:2018
Driers for paints and varnishes (ISO 4619:2018)

Language:

SS-EN ISO 3681:2018
Binders for paints and varnishes - Determination of saponification value - Titrimetric method (ISO 3681:2018)

Language:

SS-EN ISO 2812-2:2018
Paints and varnishes - Determination of resistance to liquids - Part 2: Water immersion method (ISO 2812-2:2018)

Language:

SS-EN ISO 150:2018
Raw, refined and boiled linseed oil for paints and varnishes - Specifications and methods of test (ISO 150:2018)

Language:

SS-EN ISO 4623-1:2018
Paints and varnishes - Determination of resistance to filiform corrosion - Part 1: Steel substrates (ISO 4623-1:2018)

Language:

SS-EN ISO 7783:2018
Paints and varnishes - Determination of water-vapour transmission properties - Cup method (ISO 7783:2018)

Language:

SS-EN 927-6:2018
Paints and varnishes - Coating materials and coating systems for exterior wood - Part 6: Exposure of wood coatings to artificial weathering using fluorescent UV lamps and water

Language:

SS-EN ISO 18473-2:2018
Functional pigments and extenders for special applications - Part 2: Nanoscale titanium dioxide for sunscreen application (ISO 18473-2:2015)

Language:

SS-EN ISO 18473-1:2018
Functional pigments and extenders for special applications - Part 1: Nanoscale calcium carbonate for sealant application (ISO 18473-1:2015)

Language:

SS-EN ISO 18314-1:2018
Analytical colorimetry - Part 1: Practical colour measurement (ISO 18314-1:2015)

Language:

SS-EN ISO 11126-6:2018
Preparation of steel substrates before application of paints and related products - Specifications for non-metallic blast-cleaning abrasives - Part 6: Iron and steel slags (ISO 11126-6:2018)

Language:

SS-EN ISO 11126-3:2018
Preparation of steel substrates before application of paints and related products - Specifications for non-metallic blast-cleaning abrasives - Part 3: Copper refinery slag (ISO 11126-3:2018)

Language:

SS-EN ISO 23900-6:2018
Pigments and extenders - Methods of dispersion and assessment of dispersibility in plastics - Part 6: Determination by film test (ISO 23900-6:2015)

Language:

SS-EN ISO 23900-5:2018
Pigments and extenders - Methods of dispersion and assessment of dispersibility in plastics - Part 5: Determination by filter pressure value test (ISO 23900-5:2015)

Language:

SS-EN ISO 23900-4:2018
Pigments and extenders - Methods of dispersion and assessment of dispersibility in plastics - Part 4: Determination of colouristic properties and ease of dispersion of white pigments in polyethylene by two-roll milling (ISO 23900-4:2015)

Language:

SS-EN ISO 2812-5:2018
Paints and varnishes - Determination of resistance to liquids - Part 5: Temperature-gradient oven method (ISO 2812-5:2018)

Language:

SS-EN ISO 18451-2:2018
Pigments, dyestuffs and extenders - Terminology - Part 2: Classification of colouring materials according to colouristic and chemical aspects (ISO 18451-2:2018)

Language:

SS-EN 13523-24:2018
Coil coated metals - Test methods - Part 24: Resistance to blocking and pressure marking

Language:

SS-EN ISO 12944-9:2018
Paints and varnishes - Corrosion protection of steel structures by protective paint systems - Part 9: Protective paint systems and laboratory performance test methods for offshore and related structures (ISO 12944-9:2018)

Language:

SS-EN ISO 6270-1:2018
Paints and varnishes - Determination of resistance to humidity - Part 1: Condensation (single-sided exposure) (ISO 6270-1:2017)

Language:

SS-EN 15773:2018
Industrial application of powder organic coatings to hot dip galvanized or sherardized steel articles [duplex systems] - Specifications, recommendations and guidelines

Language:

SS-EN ISO 11997-1:2018
Paints and varnishes - Determination of resistance to cyclic corrosion conditions - Part 1: Wet (salt fog)/dry/humid (ISO 11997-1:2017)

Language:

SS-EN ISO 23900-3:2018
Pigments and extenders - Methods of dispersion and assessment of dispersibility in plastics - Part 3: Determination of colouristic properties and ease of dispersion of black and colour pigments in polyethylene by two-roll milling (ISO 23900-3:2015)

Language:

SS-EN ISO 23900-2:2018
Pigments and extenders - Methods of dispersion and assessment of dispersibility in plastics - Part 2: Determination of colouristic properties and ease of dispersion in plasticized polyvinyl chloride by two-roll milling (ISO 23900-2:2015)

Language:

SS-EN ISO 23900-1:2018
Pigments and extenders - Methods of dispersion and assessment of dispersibility in plastics - Part 1: General introduction (ISO 23900-1:2015)

Language:

SS-EN ISO 2812-1:2017
Paints and varnishes - Determination of resistance to liquids - Part 1: Immersion in liquids other than water (ISO 2812-1:2017)

Language:

SS-EN ISO 2812-4:2017
Paints and varnishes - Determination of resistance to liquids - Part 4: Spotting methods (ISO 2812-4:2017)

Language:

SS-EN ISO 19399:2017
Paints and varnishes - Wedge-cut method for determination of film thickness (scribe and drill method) (ISO 19399:2016)

Language:

SS-EN ISO 787-21:2017
General methods of test for pigments and extenders - Part 21: Comparison of heat stability of pigments using a stoving medium (ISO 787-21:1979)

Language:

SS-EN ISO 787-4:2017
General methods of test for pigments and extenders - Part 4: Determination of acidity or alkalinity of the aqueous extract (ISO 787-4:1981)

Language:

SS-EN ISO 787-1:2017
General methods of test for pigments and extenders - Part 1: Comparison of colour of pigments (ISO 787-1:1982)

Language:

SS-EN ISO 787-22:2017
General methods of test for pigments and extenders - Part 22: Comparison of resistance to bleeding of pigments (ISO 787-22:1980)

Language:

SS-EN ISO 15110:2017
Paints and varnishes - Artificial weathering including acidic deposition (ISO 15110:2017)

Language:

SS-EN ISO 16773-4:2017
Electrochemical impedance spectroscopy (EIS) on coated and uncoated metallic specimens - Part 4: Examples of spectra of polymer-coated and uncoated specimens (ISO 16773-4:2017)

Language:

SS-EN 13523-27:2017
Coil coated metals - Test methods - Part 27: Resistance to humid poultice (Cataplasm test)

Language:

SS-EN ISO 20567-1:2017
Paints and varnishes - Determination of stone-chip resistance of coatings - Part 1: Multi-impact testing (ISO 20567-1:2017)

Language:

SS-EN ISO 4629-1:2016
Binders for paints and varnishes - Determination of hydroxyl value - Part 1: Titrimetric method without using a catalyst (ISO 4629-1:2016)

Language:

SS-EN ISO 4629-2:2016
Binders for paints and varnishes - Determination of hydroxyl value - Part 2: Titrimetric method using a catalyst (ISO 4629-2:2016)

Language:

SS-EN ISO 3248:2016
Paints and varnishes - Determination of the effect of heat (ISO 3248:2016, IDT)

Language:

SS-EN ISO 4623-2:2016
Paints and varnishes - Determination of resistance to filiform corrosion - Part 2: Aluminium substrates (ISO 4623-2:2016, IDT)

Language:

SS-ISO 19399:2016
Paints and varnishes - Wedge-cut method for determination of film thickness (scribe and drill method) (ISO 19399:2016, IDT)

Language:

SS-EN ISO 16482-2:2016
Binders for paints and varnishes - Determination of the non-volatile-matter content of aqueous rosin-resin dispersions - Part 2: Microwave method (ISO 16482-2:2013)

Language:

SS-EN ISO 16482-1:2016
Binders for paints and varnishes - Determination of the non-volatile-matter content of aqueous rosin-resin dispersions - Part 1: Oven method (ISO 16482-1:2013)

Language:

SS-EN ISO 16773-1:2016
Electrochemical impedance spectroscopy (EIS) on coated and uncoated metallic specimens - Part 1: Terms and definitions (ISO 16773-1:2016)

Language:

SS-EN ISO 16773-3:2016
Electrochemical impedance spectroscopy (EIS) on coated and uncoated metallic specimens - Part 3: Processing and analysis of data from dummy cells (ISO 16773-3:2016)

Language:

SS-EN ISO 16773-2:2016
Electrochemical impedance spectroscopy (EIS) on coated and uncoated metallic specimens - Part 2: Collection of data (ISO 16773-2:2016)

Language:

SS-EN ISO 4628-1:2016
Paints and varnishes - Evaluation of degradation of coatings - Designation of quantity and size of defects, and of intensity of uniform changes in appearance - Part 1: General introduction and designation system (ISO 4628-1:2016)

Language:

SS-EN ISO 4628-7:2016
Paints and varnishes - Evaluation of degradation of coatings - Designation of quantity and size of defects, and of intensity of uniform changes in appearance - Part 7: Assessment of degree of chalking by velvet method (ISO 4628-7:2016)

Language:

SS-EN ISO 4628-4:2016
Paints and varnishes - Evaluation of degradation of coatings - Designation of quantity and size of defects, and of intensity of uniform changes in appearance - Part 4: Assessment of degree of cracking (ISO 4628-4:2016)

Language:

SS-EN ISO 4628-2:2016
Paints and varnishes - Evaluation of degradation of coatings - Designation of quantity and size of defects, and of intensity of uniform changes in appearance - Part 2: Assessment of degree of blistering (ISO 4628-2:2016)

Language:

SS-EN ISO 6271:2016
Clear liquids - Estimation of colour by the platinum-cobalt colour scale (ISO 6271:2015)

Language:

SS-EN ISO 4630:2016
Clear liquids - Estimation of colour by the Gardner colour scale (ISO 4630:2015)

Language:

SS-EN ISO 8623:2015
Tall-oil fatty acids for paints and varnishes - Test methods and characteristic values (ISO 8623:2015)

Language:

SS-EN 16623:2015
Paints and varnishes - Reactive coatings for fire protection of metallic substrates - Definitions, requirements, characteristics and marking

Language:

SIS-CEN/TS 16700:2015
Paints and varnishes - Coating materials and coating systems for exterior wood - Assessment of resistance to impact of a coating on a wooden substrate

Language:

SS-EN ISO 3233-3:2015
Paints and varnishes - Determination of the percentage volume of non-volatile matter - Part 3: Determination by calculation from the non-volatile-matter content determined in accordance with ISO 3251, the density of the coating material and the density of the solvent in the coating material (ISO 3233-3:2015)

Language:

SS-EN ISO 2813:2014
Paints and varnishes - Determination of gloss value at 20 degrees, 60 degrees and 85 degrees (ISO 2813:2014)

Language:

SS-EN ISO 13803:2014
Paints and varnishes - Determination of haze on paint films at 20 degrees (ISO 13803:2014)

Language:

SS-EN 13523-4:2014
Coil coated metals - Test methods - Part 4: Pencil hardness

Language:

SS-EN 16492:2014
Paints and varnishes - Evaluation of the surface disfigurement caused by fungi and algae on coatings

Language:

SS-EN 13523-5:2014
Coil coated metals - Test methods - Part 5: Resistance to rapid deformation (impact test)

Language:

SS-EN 13523-13:2014
Coil coated metals - Test methods - Part 13: Resistance to accelerated ageing by the use of heat

Language:

SS-EN ISO 15181-6:2014
Paints and varnishes - Determination of release rate of biocides from antifouling paints - Part 6: Determination of tralopyril release rate by quantitation of its degradation product in the extract (ISO 15181-6:2012)

Language:

SS-EN 16566:2014
Paints and varnishes - Fillers for internal and/or external works - Adaptation of fillers to European standards

Language:

SS-EN 12878:2014
Pigments for the colouring of building materials based on cement and/or lime - Specifications and methods of test

Language:

SS-EN ISO 16927:2014
Paints and varnishes - Determination of the overcoatability and recoatability of a coating (ISO 16927:2014)

Language:

SS-EN ISO 1248:2008/AC:2013
Iron oxide pigments - Specifications and methods of test (ISO 1248:2006 including Technical Corrigendum 1:2007 and Cor 2:2008)

Language:

SIS-CEN/TS 16499:2013
Paints and varnishes - Coating materials and coating systems for exterior wood - Resistance to blocking of paints and varnishes on wood

Language:

SIS-CEN/TS 16498:2013
Paints and varnishes - Coating materials and coating systems for exterior wood - Assessment of tannin staining

Language:

SS-EN ISO 16474-1:2013
Paints and varnishes - Methods of exposure to laboratory light sources - Part 1: General guidance (ISO 16474-1:2013)

Language:

SS-EN ISO 16474-2:2013
Paints and varnishes - Methods of exposure to laboratory light sources - Part 2: Xenon-arc lamps (ISO 16474-2:2013)

Language:

SS-EN 13438:2013
Paints and varnishes - Powder organic coatings for hot dip galvanised or sherardised steel products for construction purposes

Language:

SS-EN ISO 11997-2:2013
Paints and varnishes - Determination of resistance to cyclic corrosion conditions - Part 2: Wet (salt fog)/dry/humidity/UV light (ISO 11997-2:2013)

Language:

SS-EN ISO 13129:2013
Paints and varnishes - Electrochemical measurement of the protection provided to steel by paint coatings - Current interrupter (CI) technique, relaxation voltammetry (RV) technique and DC transient (DCT) measurements (ISO 13129:2012)

Language:

SS 184280:2013
Paints and varnishes - Visual surface deficiencies for industrially coated wooden building materials

Language:

SS-EN 927-1:2013
Paints and varnishes - Coating materials and coating systems for exterior wood - Part 1: Classification and selection

Language:

SIS-CEN/TS 16359:2013
Paints and varnishes - Coating materials and coating systems for exterior wood - Assessment of knot staining resistance of wood coatings

Language:

SIS-CEN/TS 16358:2013
Paints and varnishes - Coating materials and coating systems for exterior wood - Assessment of air inclusions/microfoam in coating films

Language:

SS-EN ISO 20567-3:2013
Paints and varnishes - Determination of stone-chip resistance of coatings - Part 3: Single-impact test with a free-flying impact body (ISO 20567-3:2012)

Language:

SS-EN ISO 4628-8:2012
Paints and varnishes - Evaluation of degradation of coatings - Designation of quantity and size of defects, and of intensity of uniform changes in appearance - Part 8: Assessment of degree of delamination and corrosion around a scribe or other artificial defect (ISO 4628-8:2012)

Language:

SS-EN ISO 9117-5:2012
Paints and varnishes - Drying tests - Part 5: Modified Bandow-Wolff test (ISO 9117-5:2012)

Language:

SS-EN ISO 9117-4:2012
Paints and varnishes - Drying tests - Part 4: Test using a mechanical recorder (ISO 9117-4:2012)

Language:

SS-EN ISO 13632:2012
Binders for paints and varnishes - Rosin - Sampling and sample preparation for colour measurement (ISO 13632:2012)

Language:

SS-EN ISO 9117-6:2012
Paints and varnishes - Drying tests - Part 6: Print-free test (ISO 9117-6:2012)

Language:

SS-EN ISO 12137:2011
Paints and varnishes - Determination of mar resistance (ISO 12137:2011)

Language:

SS-EN ISO 6272-1:2011
Paints and varnishes - Rapid-deformation (impact resistance) tests - Part 1: Falling-weight test, large-area indenter (ISO 6272-1:2011)

Language:

SS-EN ISO 6272-2:2011
Paints and varnishes - Rapid-deformation (impact resistance) tests - Part 2: Falling-weight test, small-area indenter (ISO 6272-2:2011)

Language:

SS-EN ISO 19334:2011
Binders for paints and varnishes - Gum rosin - Gas-chromatographic analysis (ISO 19334:2010)

Language:

SS-EN ISO 2811-4:2011
Paints and varnishes - Determination of density - Part 4: Pressure cup method (ISO 2811-4:2011)

Language:

SS-EN ISO 2811-2:2011
Paints and varnishes - Determination of density - Part 2: Immersed body (plummet) method (ISO 2811-2:2011)

Language:

SS-EN ISO 1519:2011
Paints and varnishes - Bend test (cylindrical mandrel) (ISO 1519:2011)

Language:

SS 184006:2011
Paints and varnishes - Repainting of coil coated steel sheets for roofing and cladding - Paint system and selection of paint systems

Language:

SS 184003:2011
Paints and varnishes - Repainting of coil coated steel sheets for roofing and cladding - Buyers documentation - Performance instructions

Language:

SS 184005:2011
Paints and varnishes - Repainting of coil coated steel sheets for roofing and cladding - Painting, masking and environmental protection

Language:

SS-EN ISO 14446:2010
Binders for paints and varnishes - Determination of the viscosity of industrial cellulose nitrate solutions and classification of such solutions (ISO 14446:1999)

Language:

SS-EN ISO 15234:2010
Paints and varnishes - Testing of formaldehyde-emitting coatings and melamine foams - Determination of the steady-state concentration of formaldehyde in a small test chamber (ISO 15234:1999)

Language:

SS-EN ISO 277:2010
Binders for paints and varnishes - Raw tung oil - Requirements and methods of test (ISO 277:2002)

Language:

SS-EN ISO 10890:2010
Paints and varnishes - Modelling of biocide release rate from antifouling paints by mass-balance calculation (ISO 10890:2010)

Language:

SS 184007:2010
Paints and varnishes - Repainting of coil coated steel sheets for roofing and cladding - Examinations and test methods

Language:

SS-EN ISO 1513:2010
Paints and varnishes - Examination and preparation of test samples (ISO 1513:2010)

Language:

SS-EN ISO 9117-2:2010
Paints and varnishes - Drying tests - Part 2: Pressure test for stackability (ISO 9117-2:2010)

Language:

SS-EN ISO 9117-3:2010
Paints and varnishes - Drying tests - Part 3: Surface-drying test using ballotini (ISO 9117-3:2010)

Language:

SS 184002:2009
Paints and varnishes - Repainting of coil coated steel sheets for roofing and cladding - Buyers documentation - Administrative instructions

Language:

SS-EN ISO 7579:2009
Dyestuffs - Determination of solubility in organic solvents - Gravimetric and photometric methods (ISO 7579:2009)

Language:

SS-EN ISO 787-7:2009
General methods of test for pigments and extenders - Part 7: Determination of residue on sieve - Water method - Manual procedure (ISO 787-7:2009)

Language:

SS-EN ISO 9117-1:2009
Paints and varnishes - Drying tests - Part 1: Determination of through-dry state and through-dry time (ISO 9117-1:2009)

Language:

SS 184004:2008
Paints and varnishes - Repainting of coil coated steel sheets for roofing and cladding - Surface preparation

Language:

SS-EN ISO 15181-4:2008
Paints and Varnishes - Determination of release rate of biocides from antifouling paints - Part 4: Determination of pyridine-triphenylborane (PTPB) concentration in the extract and calculation of the release rate (ISO 15181-4:2008)

Language:

SS-EN ISO 15181-5:2008
Paints and varnishes - Determination of release rate of biocides from antifouling paints - Part 5: Calculation of the tolylfluanid and dichlofluanid release rate by determination of the concentration of dimethyltolylsulfamide (DMST) and dimethylphenylsulfamide (DMSA) in the extract (ISO 15181-5:2008)

Language:

SS-EN ISO 10601:2008
Micaceous iron oxide pigments for paints - Specifications and test methods (ISO 10601:2007)

Language:

SS-EN ISO 21227-4:2008
Paints and varnishes - Evaluation of defects on coated surfaces using optical imaging - Part 4: Evaluation of filiform corrosion (ISO 21227-4:2008)

Language:

SS-EN ISO 1248:2008
Iron oxide pigments - Specifications and methods of test (ISO 1248:2006 including Technical Corrigendum 1:2007)

Language:

SS-EN 1062-3:2008
Paints and varnishes - Coating materials and coating systems for exterior masonry and concrete - Part 3: Determination of liquid water permeability

Language:

SS-EN ISO 17132:2007
Paints and varnishes - T-bend test (ISO 17132:2007)

Language:

SS-EN ISO 10283:2007
Binders for paints and varnishes - Determination of monomeric diisocyanates in polyisocyanate resins (ISO 10283:2007)

Language:

SS-EN ISO 15181-2:2007
Paints and varnishes - Determination of release rate of biocides from antifouling paints - Part 2: Determination of copper-ion concentration in the extract and calculation of the release rate (ISO 15181-2:2007)

Language:

SS-EN ISO 15181-1:2007
Paints and varnishes - Determination of release rate of biocides from antifouling paints - Part 1: General method for extraction of biocides (ISO 15181-1:2007)

Language:

SS-EN ISO 15181-3:2007
Paints and varnishes - Determination of release rate of biocides from antifouling paints - Part 3: Calculation of the zinc ethylene-bis (dithiocarbamate) (zineb) release rate by determination of the concentration of ethylenethiourea in the extract (ISO 15181-3:2007)

Language:

SS-EN ISO 21227-3:2007
Paints and varnishes - Evaluation of defects on coated surfaces using optical imaging - Part 3: Evaluation of delamination and corrosion around a scribe (ISO 21227-3:2007)

Language:

SS-EN ISO 11909:2007
Binders for paints and varnishes - Polyisocyanate resins - General methods of test (ISO 11909:2007)

Language:

SS-EN ISO 7143:2007
Paints, varnishes and binders - Methods of test for characterizing water-based binders (ISO 7143:2007)

Language:

SS-EN ISO 1520:2006
Paints and varnishes - Cupping test (ISO 1520:2006)

Language:

SS-EN ISO 21227-2:2006
Paints and varnishes - Evaluation of defects on coated surfaces using optical imaging - Part 2: Evaluation procedure for multi-impact stone-chipping test (ISO 21227-2:2006)

Language:

SS-EN 15060:2006
Paints and varnishes - Guide for the classification and selection of coating systems for wood based materials in furniture for interior use

Language:

SS-EN ISO 11998:2006
Paints and varnishes - Determination of wet-scrub resistance and cleanability of coatings (ISO 11998:2006)

Language:

SS-EN ISO 15710:2006
Paints and varnishes - Corrosion testing by alternate immersion in and removal from a buffered sodium chloride solution (ISO 15710:2002)

Language:

SS-EN ISO 16862:2006
Paints and varnishes - Evaluation of sag resistance (ISO 16862:2003)

Language:

SS-EN ISO 6860:2006
Paints and varnishes - Bend test (conical mandrel) (ISO 6860:2006)

Language:

SS-EN ISO 4625-2:2006
Binders for paints and varnishes - Determination of softening point - Part 2: Cup-and-ball method (ISO 4625-2:2004)

Language:

SS-EN ISO 14680-3:2006
Paints and varnishes - Determination of pigment content - Part 3: Filtration method (ISO 14680-3:2000)

Language:

SS-EN ISO 14680-2:2006
Paints and varnishes - Determination of pigment content - Part 2: Ashing method (ISO 14680-2:2000)

Language:

SS-EN ISO 14680-1:2006
Paints and varnishes - Determination of pigment content - Part 1: Centrifuge method (ISO 14680-1:2000)

Language:

SS-EN ISO 16805:2005
Binders for paints and varnishes - Determination of glass transition temperature (ISO 16805:2003)

Language:

SS-EN ISO 11126-9:2005
Preparation of steel substrates before application of paints and related products - Specifications for non-metallic blast-cleaning abrasives - Part 9: Staurolite (ISO 11126-9:1999)

Language:

SS-EN 13523-16:2004
Coil coated metals - Test methods - Part 16: Resistance to abrasion

Language:

SS-EN ISO 6744-1:2004
Binders for paints and varnishes - Alkyd resins - Part 1: General methods of test (ISO 6744-1:1999)

Language:

SS-EN ISO 6744-4:2004
Binders for paints and varnishes - Alkyd resins - Part 4: Determination of fatty acid content (ISO 6744-4:1999)

Language:

SS-EN ISO 6744-3:2004
Binders for paints and varnishes - Alkyd resins - Part 3: Determination of unsaponifiable matter content (ISO 6744-3:1999)

Language:

SS-EN ISO 6744-2:2004
Binders for paints and varnishes - Alkyd resins - Part 2: Determination of phthalic anhydride content (ISO 6744-2:1999)

Language:

SS-EN ISO 15880:2004
Paints, varnishes and binders - Determination of MEQ value of water-based coating materials and binders (ISO 15880:2000)

Language:

SS-EN 1062-1:2004
Paints and varnishes - Coating materials and coating systems for exterior masonry and concrete - Part 1: Classification

Language:

SS-EN 1062-7:2004
Paints and varnishes - Coating materials and coating systems for exterior masonry and concrete - Part 7: Determination of crack bridging properties

Language:

SS-EN 14469-1:2004
Pigments and extenders - Testing of colouring materials in plasticized polyvinyl chloride (PVC-P) - Part 1: Composition and preparation of basic mixtures

Language:

SS-EN 14469-3:2004
Pigments and extenders - Testing of colouring materials in plasticized polyvinyl chloride (PVC-P) - Part 3: Determination of the relative tinting strength of white pigments

Language:

SS-EN 14469-2:2004
Pigments and extenders - Testing of colouring materials in plasticized polyvinyl chloride (PVC-P) - Part 2: Preparation of test specimens

Language:

SS-EN 14469-4:2004
Pigments and extenders - Testing of colouring materials in plasticized polyvinyl chloride (PVC-P) - Part 4: Determination of bleeding of colouring materials

Language:

SS-EN ISO 21227-1
Paints and varnishes - Evaluation of defects on coated surfaces using optical imaging - Part 1: General guidance (ISO 21227-1:2003)

Language:

SS-EN ISO 2815
Paints and varnishes - Buchholz indentation test (ISO 2815:2003)

Language:

SS-EN 1062-6
Paints and varnishes - Coating materials and coating systems for exterior masonry and concrete - Part 6: Determination of carbon dioxide permeability

Language:

SS-EN 1062-11
Paints and varnishes - Coating materials and coating systems for exterior masonry and concrete - Part 11: Methods of conditioning before testing

Language:

SS-EN ISO 11668
Binders for paints and varnishes - Chlorinated polymerization resins - General methods of test (ISO 11668:1997)

Language:

SS-EN ISO 3668
Paints and varnishes - Visual comparison of the colour of paints (ISO 3668:2001)

Language:

SS-EN 12877-2
Colouring materials in plastics - Determination of colour stability to heat during processing of colouring materials in plastics - Part 2: Determination by injection moulding

Language:

SS-EN 12877-3
Colouring materials in plastics - Determination of colour stability to heat during processing of colouring materials in plastics - Part 3: Determination by oven test

Language:

SS-EN 12877-1
Colouring materials in plastics - Determination of colour stability to heat during processing of colouring materials in plastics - Part 1: General introduction

Language:

SS-EN 12877-4
Colouring materials in plastics - Determination of colour stability to heat during processing of colouring materials in plastics - Part 4: Determination by two-roll milling

Language:

SS-EN ISO 8130-9
Coating powders - Part 9: Sampling (ISO 8130-9:1992)

Language:

SS-EN ISO 4629
Binders for paints and varnishes - Determination of hydroxyl value - Titrimetric method (ISO 4629:1996)

Language:

SS 19104 + Bilaga
NCS-colour samples - Observation and measurement conditions and tolerances

Language:

SS 19100
Colour notation system

Language:

SS-EN ISO 787-5
General methods of test for pigments and extenders - Part 5: Determination of oil absorption value (ISO 787-5:1980)

Language:

SS-EN 23270
Paints and varnishes and their raw materials - Temperatures and humidities for conditioning and testing (ISO 3270:1984)

Language:

SS 31415
The colours of the Swedish flag

Language:

SS 900001
Colour code for numerals

Language:

SS 1780(E)
Spray painting equipment - Determination of paint separation capacity

Language:

Show more Show less

Participants 3 companies and organizations

NCS Colour AB, Stockholm

Nordic Building & Paint Labs AB, Nacka

Sveff Organisation AB, Stockholm

International participation 5 international committees

ISO/TC 35, Paints and varnishes

ISO/TC 35/SC 9, General test methods for paints and varnishes

CEN/TC 139, Paints and varnishes

CEN/TC 139/WG 2, Coating systems for wood

CEN/TC 298, Pigments and extenders

Show more Show less

Financing

Arbetet styrs och finansieras av de organisationer som deltar i kommittén. Projektavgiften beror på arbetsform och omfattning, samt antal deltagare.

Läs mer

Ett värdefullt arbete

Färg och lack projektet utvecklar standarder som säkrar, förenklar och effektiviserar produktion och användning av produkter för ytbehandling. Avsikten är att ta fram standarder för provningsmetoder och krav för färg och lack samt för ytbehandling av trä, metall, betong eller puts där färg och lack används. Standarderna används vid ytbehandling, vid produktion av färger och lacker och vid framtagande av råvaror till dessa

För att kunna bedriva det svenska standardiseringsarbetet behövs en stark förankring hos de svenska intressenterna – detta skapas i gruppen Färg och lack, SIS/TK 433.

Produktguide

Här hittar du en produktguide som visar hur de olika standarderna inom färg och lack hänger samman. Till produktguiden

Vill du vara med i kommittén?

Du är välkommen att delta i SIS tekniska kommitté för Färg och lack. Om du exempelvis är:

• användare av färg och lack

• säljare av färg och lack

• tillverkare av produkter som ytbehandlas med färg och lack

Är du intresserad av att delta, kontakta oss så berättar vi mer om arbetet. Läs mer om kommittéarbete inom SIS.

Subjects

Paint and colour industries (87) Paints and varnishes (87.040) Paint coating processes (87.020) Paint ingredients (87.060) General (87.060.01) Pigments and extenders (87.060.10) Binders (87.060.20) Solvents (87.060.30) General (87.060.99) Paint coating equipment (87.100)

Färg och lack

More information about the committèes work:

Ett värdefullt arbete

Vill du vara med i kommittén?

Subjects

För dig som är kommittédeltagare i TK 433

Contact

Discount	- EUR	- SEK
Sum	EUR	SEK
Shipping	EUR	SEK
Vat	EUR	SEK
Total	EUR	SEK

Färg och lack

More information about the committèes work:

Ett värdefullt arbete

Vill du vara med i kommittén?

Subjects

För dig som är kommittédeltagare i TK 433

Contact

Within the same area