Standardization · SIS/TK 202

Vägmaterial

De allra flesta av oss använder dagligen vägnätet för att förflytta oss och ta oss dit vi ska, utan att reflektera över vägarnas kvalitet. Och så ska det naturligtvis vara. Kommittén arbetar därför med att ta fram standarder för vägmaterial och hur kvaliteten kontrolleras. Arbetet är speciellt inriktat mot Europastandarderna, som styr vägmaterial.

För att entreprenörer och beställare ska kunna komma överens krävs att de har samma referensramar, både före, under och efter leverans. Här får de nya europeiska specifikations- och provningsstandarderna avgörande betydelse.

En viktig part i detta sammanhang är Trafikverket i rollen som föreskrivande myndighet.

Den svenska kommittén har som mål att påverka och delta i utveck­lingen av europeiska standarder för vägmaterial. Projektet ska aktivt medverka vid implemen­teringen av europeiska standarder i Sverige och vid behov översätta dem.

Det praktiska arbetet är uppdelat på sex olika inriktningar:

  • Asfaltmassor, ytbehandlingar och slamförseglingar
  • Bitumen
  • Betongvägar
  • Hydrauliskt bundet och obundet
  • Provningsmetoder för vägytan
  • Fogar

Sverige har länge arbetat hårt för att få fram standarder som baseras på funktionella egenskaper, eftersom vi anser att det är det moderna sättet att beskriva en produkt. 

More information about the committèes work:

Now working on 25 standards
FprEN 13587, Bitumens and bituminous binders - Determination of the tensile properties of bituminous binders by the tensile test method (50.60)
EN 58:2026, Bitumens and bituminous binders - Sampling of bituminous binders (50.60)
FprEN 12697-10, Bituminous mixtures - Test methods - Part 10: Compactability (50.20)
FprEN 12697-13, Bituminous mixtures - Test methods - Part 13: Temperature measurement (50.20)
FprEN 12697-17, Bituminous mixtures - Test methods - Part 17: Particle loss of porous asphalt specimens (50.20)
FprEN 12697-18, Bituminous mixtures - Test methods - Part 18: Binder drainage (50.20)
FprEN 12697-27, Bituminous mixtures - Test methods - Part 27: Sampling (50.20)
prEN 1429, Bitumens and bituminous binders - Determination of residue on sieving of bituminous emulsions and determination of storage stability by sieving (40.60)
prEN 13036-4, Road and airfield surface characteristics - Test methods - Part 4: Method for measurement of slip/skid resistance of a surface: The pendulum test (40.60)
prEN 12697-12, Bituminous mixtures - Test methods - Part 12: Determination of the water sensitivity of bituminous specimens (40.60)
EN 14770:2023/prA1, Bitumens and bituminous binders - Determination of complex shear modulus and phase angle - Dynamic Shear Rheometer (DSR) (40.60)
EN 17643:2022/prA1, Bitumens and bituminous binders - Determination of equi-shear modulus temperature and phase angle using a Dynamic Shear Rheometer (DSR) - BTSV test (40.60)
prEN 12697-14, Bituminous mixtures - Test methods - Part 14: Water content (40.20)
prEN 18389, Bitumens and bituminous binders - Complementary Performance-related Specification Framework (40.20)
prEN 12272-2, Surface dressing - Test methods - Part 2: Visual assessment of defects (40.10)
prEN 12272-4, Surface dressing - Test methods - Part 4: Calibration of binder sprayer on stationary bench (40.10)
prCEN/TS 18484, Road and airfield surface characteristics - Trailer-based measurement of the rolling resistance of road surfaces using the angle-method (30.99)
prEN 12274-8 rev, Slurry surfacing - Test methods - Part 8: Visual assessment of defects (30.99)
prEN 18449-1, Bitumens and bituminous binders - Environmental product declarations - Complementary product category rules (c-PCR) - Part 1: Cradle to gate for bitumens (20.60)
prEN 13589 rev, Bitumens and bituminous binders - Determination of the tensile properties of modified bitumen by the force ductility method (20.60)
prEN 1425 rev, Bitumens and bituminous binders - Characterization of perceptible properties (10.99)
prEN ISO 11819-2 rev, Acoustics — Measurement of the influence of road surfaces on traffic noise — Part 2: The close-proximity method (10.99)
-, Bitumens and bituminous binders - Specification framework for clear binders (00.60)
prEN 13302 rev, Bitumens and bituminous binders - Determination of dynamic viscosity of bituminous binder using a rotating spindle apparatus (00.60)
prEN 13632 rev, Bitumen and bituminous binders - Visualisation of polymer dispersion in polymer modified bitumen (00.60)
Show more Show less
Published 228 standards
standard ikon pdf
SS-EN 12697-23:2026
Bituminous mixtures — Test methods — Part 23: Determination of the indirect tensile strength of bituminous specimens
Language:
standard ikon pdf
SIS/TS 12600:2026
Road materials — Shear box test — Determination of the dynamic shear modulus, phase angle and viscosity of specimens of bituminous mixtures
Language:
standard ikon pdf
SIS-CEN/TS 18301:2026
Road materials — Environmental product declarations — Product category rules complementary to EN 15804 for bituminous mixtures
Language:
standard ikon pdf
SS-EN 1427:2026
Bitumen and bituminous binders — Determination of the softening point — Ring and Ball method
Language:
standard ikon pdf
SS-EN 16659:2026
Bitumen and Bituminous Binders — Multiple Stress Creep and Recovery Test (MSCRT)
Language:
standard ikon pdf
SS-EN 13880-11:2026
Hot applied joint sealants — Part 11: Method for the preparation of asphalt test blocks used in the function test and for the determination of compatibility with asphalt pavements
Language:
standard ikon pdf
SS-EN 12697-48:2021+A1:2025
Bituminous mixtures — Test methods — Part 48: Interlayer bonding
Language:
standard ikon pdf
SIS-CEN/TS 18194:2025
Road and airfield surface characteristics — Characterisation of the acoustic properties of road surfaces
Language:
standard ikon pdf
SS-EN 12272-1:2025
Surface dressing - Test methods - Part 1: Rate of spread and accuracy of spread of binder and chippings
Language:
standard ikon pdf
SS-EN 12272-3:2025
Surface dressing - Test methods - Part 3: Determination of binder aggregate adhesivity by the Vialit plate shock test method
Language:
standard ikon pdf
SS-EN 13036-8:2025
Road and airfield surface characteristics — Test methods — Part 8: Determination of transverse unevenness and crossfall indices
Language:
standard ikon pdf
SS-EN 15626:2025
Bitumen and bituminous binders — Determination of adhesivity of cut-back and fluxed bituminous binders by water immersion test — Aggregate method
Language:
standard ikon pdf
SIS-CEN/TS 12697-52:2025
Bituminous mixtures — Test methods — Part 52: Conditioning to address oxidative ageing
Language:
standard ikon pdf
SS-EN ISO 13473-5:2025
Characterization of pavement texture by use of surface profiles — Part 5: Determination of megatexture (ISO/FDIS 13473-5:2024, IDT)
Language:
standard ikon pdf
SS-EN 12697-35:2025
Bituminous mixtures — Test methods — Part 35: Laboratory mixing
Language:
standard ikon pdf
SIS-CEN/TR 18114:2025
Bitumen and bituminous binders — Sustainability — Review on how to address environmental information
Language:
standard ikon pdf
SS-EN 12697-16:2024
Bituminous mixtures — Test methods — Part 16: Abrasion by studded tyres
Language:
standard ikon pdf
SS-EN 12697-2:2024
Bituminous mixtures - Test methods - Part 2: Determination of particle size distribution
Language:
standard ikon pdf
SS-EN 12607-1:2024
Bitumen and bituminous binders — Determination of the resistance to hardening under influence of heat and air — Part 1: RTFOT method
Language:
standard ikon pdf
SS-EN 1426:2024
Bitumen and bituminous binders — Determination of needle penetration
Language:
standard ikon pdf
SS-EN 12597:2024
Bitumen and bituminous binders — Terminology
Language:
standard ikon pdf
SS-EN 12594:2024
Bitumen and bituminous binders — Preparation of test samples
Language:
standard ikon pdf
SS-EN 13880-3:2024
Hot applied joint sealants — Part 3: Test method for the determination of penetration and recovery (resilience)
Language:
standard ikon pdf
SS-EN 13880-4:2024
Hot applied joint sealants — Part 4: Test method for the characterization of heat resistance — Change in penetration value
Language:
standard ikon pdf
SS-EN 15466-2:2024
Primers for cold and hot applied joint sealants — Part 2: Determination of resistance against alkali
Language:
standard ikon pdf
SS-EN 15466-1:2024
Primers for cold and hot applied joint sealants — Part 1: Determination of homogeneity
Language:
standard ikon pdf
SS-EN 15466-3:2024
Primers for cold and hot applied joint sealants — Part 3: Determination of solids content and evaporation behaviour of volatiles
Language:
standard ikon pdf
SS-EN 13863-6:2024
Concrete pavements — Part 6: Test method for the determination of the tensile strength of concrete on cylindrical discs
Language:
standard ikon pdf
SS-EN 13863-5:2024
Concrete pavements — Part 5: Determination of the bond stress of dowels to be used in concrete pavements
Language:
standard ikon pdf
SS-EN 13880-5:2024
Hot applied joint sealants — Part 5: Test method for the determination of flow resistance
Language:
standard ikon pdf
SS- EN 16346:2024
Bitumen and bituminous binders — Determination of breaking behaviour and immediate adhesivity of cationic bituminous emulsions
Language:
standard ikon pdf
SS-EN 12697-22:2020+A1:2024
Bituminous mixtures — Test methods — Part 22: Wheel tracking
Language:
standard ikon pdf
SS-EN 13877-1:2023
Concrete pavements - Part 1: Materials
Language:
standard ikon pdf
SS-EN 13877-2:2023
Concrete pavements - Part 2: Functional requirements for concrete pavements
Language:
standard ikon pdf
SS-EN 12697-47:2023
Bituminous mixtures - Test methods - Part 47: Determination of the ash content of natural asphalts
Language:
standard ikon pdf
SS-EN 14771:2023
Bitumen and bituminous binders - Determination of the flexural creep stiffness - Bending Beam Rheometer (BBR)
Language:
standard ikon pdf
SS-EN 12596:2023
Bitumen and bituminous binders - Determination of dynamic viscosity by vacuum capillary
Language:
standard ikon pdf
SS-EN 14770:2023
Bitumen and bituminous binders - Determination of complex shear modulus and phase angle - Dynamic Shear Rheometer (DSR)
Language:
standard ikon pdf
SS-EN 14769:2023
Bitumen and bituminous binders - Accelerated long-term ageing conditioning by a Pressure Ageing Vessel (PAV)
Language:
standard ikon pdf
SS-EN 12595:2023
Bitumen and bituminous binders - Determination of kinematic viscosity
Language:
standard ikon pdf
SS-EN 12697-43:2023
Bituminous mixtures - Test methods - Part 43: Resistance to fuel
Language:
standard ikon pdf
SS-EN 12697-4:2023
Bituminous mixtures - Test methods - Part 4: Bitumen recovery: Fractionating column
Language:
standard ikon pdf
SS-EN ISO 11819-1:2023
Acoustics - Measurement of the influence of road surfaces on traffic noise - Part 1: Statistical Pass-By method (ISO 11819-1:2023)
Language:
standard ikon pdf
SS-EN 12697-41:2023
Bituminous mixtures - Test methods - Part 41: Resistance to de-icing fluids
Language:
standard ikon pdf
SS-EN 12846-2:2022
Bitumen and bituminous binders - Determination of efflux time by the efflux viscometer - Part 2: Cut-back and fluxed bituminous binders
Language:
standard ikon pdf
SS-EN 12846-1:2022
Bitumen and bituminous binders - Determination of efflux time by the efflux viscometer - Part 1: Bituminous emulsions
Language:
standard ikon pdf
SS-EN 12697-33:2019+A1:2022
Bituminous mixtures - Test method - Part 33: Specimen prepared by roller compactor
Language:
standard ikon pdf
SS-EN 12697-26:2018+A1:2022
Bituminous mixtures - Test methods - Part 26: Stiffness
Language:
standard ikon pdf
SS-EN 17643:2022
Bitumen and bituminous binders - Determination of equi-shear modulus temperature and phase angle using a Dynamic Shear Rheometer (DSR) - BTSV test
Language:
standard ikon pdf
SS-EN 12847:2022
Bitumen and bituminous binders - Determination of settling tendency of bituminous emulsions
Language:
standard ikon pdf
SS-EN 12850:2022
Bitumen and bituminous binders - Determination of the pH value of bituminous emulsions
Language:
standard ikon pdf
SS-EN 12697-37:2022
Bituminous mixtures - Test methods - Part 37: Hot sand test for the adhesivity of binder on pre-coated chippings for Hot-Rolled-Asphalt (HRA)
Language:
standard ikon pdf
SS-EN 12697-36:2022
Bituminous mixtures - Test methods - Part 36: Determination of the thickness of bituminous pavement
Language:
standard ikon pdf
SS-EN 12697-7:2022
Bituminous mixtures - Test methods - Part 7: Determination of the bulk density of bituminous specimens by gamma rays
Language:
standard ikon pdf
SS-EN 12697-15:2022
Bituminous mixtures - Test methods - Part 15: Determination of the segregation sensitivity
Language:
standard ikon pdf
SS-EN 12697-49:2022
Bituminous mixtures - Test methods - Part 49: Determination of friction after polishing
Language:
standard ikon pdf
SS-EN 13286-4:2021
Unbound and hydraulically bound mixtures - Part 4: Test methods for laboratory reference density and water content - Vibrating hammer
Language:
standard ikon pdf
SS-EN 13286-1:2021
Unbound and hydraulically bound mixtures - Part 1: Test methods for laboratory reference density and water content - Introduction, general requirements and sampling
Language:
standard ikon pdf
SS-EN 13286-47:2021
Unbound and hydraulically bound mixtures - Part 47: Test method for the determination of California bearing ratio, immediate bearing index and linear swelling
Language:
standard ikon pdf
SS-EN 13286-41:2021
Unbound and hydraulically bound mixtures - Part 41: Test method for the determination of the compressive strength of hydraulically bound mixtures
Language:
standard ikon pdf
SS-EN 13614:2021
Bitumen and bituminous binders - Determination of adhesivity of bituminous emulsions by water immersion test
Language:
standard ikon pdf
SS-EN 12697-42:2021
Bituminous mixtures - Test methods - Part 42: Amount of foreign matter in reclaimed asphalt
Language:
standard ikon pdf
SIS-CEN/TR 17499:2020
Bitumen and bituminous binders - Examples for CE Marking and Declaration of Performances (DoP)
Language:
standard ikon pdf
SIS-CEN/TS 17482:2020
Bitumen and bituminous binders - Determination of acid number of bitumen - Potentiometric method
Language:
standard ikon pdf
SIS-CEN/TS 17481:2020
Bitumen and bituminous binders - Determination of salt content in bitumen - Electrical conductivity method
Language:
standard ikon pdf
SS-EN 12697-29:2020
Bituminous mixtures - Test methods - Part 29: Determination of the dimensions of a bituminous specimen
Language:
standard ikon pdf
SS-EN 12697-1:2020
Bituminous mixtures - Test methods - Part 1: Soluble binder content
Language:
standard ikon pdf
SS-EN 12697-6:2020
Bituminous mixtures - Test methods - Part 6: Determination of bulk density of bituminous specimens
Language:
standard ikon pdf
SS-EN 12697-11:2020
Bituminous mixtures - Test methods - Part 11: Determination of the affinity between aggregate and bitumen
Language:
standard ikon pdf
SS-EN 12697-19:2020
Bituminous mixtures - Test methods - Part 19: Permeability of specimen
Language:
standard ikon pdf
SS-EN 12697-20:2020
Bituminous mixtures - Test methods - Part 20: Indentation using cube or Marshall specimens
Language:
standard ikon pdf
SS-EN 12697-46:2020
Bituminous mixtures - Test methods - Part 46: Low temperature cracking and properties by uniaxial tension tests
Language:
standard ikon pdf
SS-EN 12697-45:2020
Bituminous mixtures - Test methods - Part 45: Saturation Ageing Tensile Stiffness (SATS) conditioning test
Language:
standard ikon pdf
SS-EN 12697-40:2020
Bituminous mixtures - Test methods - Part 40: In situ drainability
Language:
standard ikon pdf
SS-EN 12697-39:2020
Bituminous mixtures - Test methods - Part 39: Binder content by ignition
Language:
standard ikon pdf
SS-EN 12697-34:2020
Bituminous mixtures - Test methods - Part 34: Marshall test
Language:
standard ikon pdf
SS-EN 12697-14:2020
Bituminous mixtures - Test methods - Part 14: Water content
Language:
standard ikon pdf
SS-EN 12697-28:2020
Bituminous mixtures - Test methods - Part 28: Preparation of samples for determining binder content, water content and grading
Language:
standard ikon pdf
SS-EN 12697-22:2020
Bituminous mixtures - Test methods - Part 22: Wheel tracking
Language:
standard ikon pdf
SS-EN 12697-21:2020
Bituminous mixtures - Test methods - Part 21: Indentation using plate specimens
Language:
standard ikon pdf
SS-EN 12697-56:2019
Bituminous mixtures - Test methods - Part 56: Specimen preparation by static compaction
Language:
standard ikon pdf
SS-EN 12697-55:2019
Bituminous mixtures - Test methods - Part 55: Organoleptic assessment of mixtures with bitumen emulsion
Language:
standard ikon pdf
SS-EN 12697-53:2019
Bituminous mixtures - Test methods - Part 53: Cohesion increase by spreadability-meter method
Language:
standard ikon pdf
SS-EN 13108-31:2019
Bituminous mixtures - Material specifications - Part 31: Asphalt Concrete with Bituminous Emulsion
Language:
standard ikon pdf
SS-EN 12697-54:2019
Bituminous mixtures - Test methods - Part 54: Curing of specimen for test of mixtures with bitumen emulsion
Language:
standard ikon pdf
SS-EN 13036-5:2019
Road and airfield surface characteristics - Test methods - Part 5: Determination of longitudinal unevenness indices
Language:
standard ikon pdf
SS-EN 13358:2019
Bitumen and bituminous binders - Determination of the distillation characteristics of cut-back and fluxed bituminous binders made with mineral fluxes
Language:
standard ikon pdf
SS-EN 13880-6:2019
Hot applied joint sealants - Part 6: Method for the preparation of samples for testing
Language:
standard ikon pdf
SS-EN 13880-7:2019
Hot applied joint sealants - Part 7: Function testing of joint sealants
Language:
standard ikon pdf
SS-EN 14187-9:2019
Cold applied joint sealants - Test methods - Part 9: Function testing of joint sealants
Language:
standard ikon pdf
SS-EN 14187-7:2019
Cold applied joint sealants - Test methods - Part 7: Determination of the resistance to flame
Language:
standard ikon pdf
SS-EN 14187-5:2019
Cold applied joint sealants - Test methods - Part 5: Determination of the resistance to hydrolysis
Language:
standard ikon pdf
SS-EN ISO 13473-1:2019
Characterization of pavement texture by use of surface profiles - Part 1: Determination of mean profile depth (ISO 13473-1:2019)
Language:
standard ikon pdf
SS-EN 12697-32:2019
Bituminous mixtures - Test methods - Part 32: Specimen preparation by vibratory compactor
Language:
standard ikon pdf
SS-EN 12697-31:2019
Bituminous mixtures - Test methods - Part 31: Specimen preparation by gyratory compactor
Language:
standard ikon pdf
SS-EN 12697-44:2019
Bituminous mixtures - Test methods - Part 44: Crack propagation by semi-circular bending test
Language:
standard ikon pdf
SS-EN 13074-2:2019
Bitumen and bituminous binders - Recovery of binder from bituminous emulsion or cut-back or fluxed bituminous binders - Part 2: Stabilization after recovery by evaporation
Language:
standard ikon pdf
SS-EN 13074-1:2019
Bitumen and bituminous binders - Recovery of binder from bituminous emulsion or cut-back or fluxed bituminous binders - Part 1: Recovery by evaporation
Language:
standard ikon pdf
SS-EN 13880-8:2019
Hot applied joint sealants - Part 8: Test method for the determination of the change in weight of fuel resistance joint sealants after fuel immersion
Language:
standard ikon pdf
SS-EN 12697-5:2019
Bituminous mixtures - Test methods - Part 5: Determination of the maximum density
Language:
standard ikon pdf
SS-EN 12697-8:2019
Bituminous mixtures - Test methods - Part 8: Determination of void characteristics of bituminous specimens
Language:
standard ikon pdf
SS-EN 12697-30:2019
Bituminous mixtures - Test methods - Part 30: Specimen preparation by impact compactor
Language:
standard ikon pdf
SS-EN 12697-3:2013+A1:2019
Bituminous mixtures - Test methods - Part 3: Bitumen recovery: Rotary evaporator
Language:
standard ikon pdf
SS-EN 13702:2018
Bitumen and bituminous binders - Determination of dynamic viscosity of bitumen and bituminous binders by the cone and plate method
Language:
standard ikon pdf
SS-EN 13285:2018
Unbound mixtures - Specifications
Language:
standard ikon pdf
SS-EN 13285:2018
Unbound mixtures - Specifications
Language:
standard ikon pdf
SS-EN 13589:2018
Bitumen and bituminous binders - Determination of the tensile properties of modified bitumen by the force ductility method
Language:
standard ikon pdf
SS-EN 12697-12:2018
Bituminous mixtures - Test methods - Part 12: Determination of the water sensitivity of bituminous specimens
Language:
standard ikon pdf
SS-EN 12697-24:2018
Bituminous mixtures - Test methods - Part 24: Resistance to fatigue
Language:
standard ikon pdf
SS-EN 13302:2018
Bitumen and bituminous binders - Determination of dynamic viscosity of bituminous binder using a rotating spindle apparatus
Language:
standard ikon pdf
SS-EN 13880-13:2018
Hot applied joint sealants - Part 13: Test method for the determination of the discontinuous extension (adherence test)
Language:
standard ikon pdf
SS-EN 13880-10:2018
Hot applied joint sealants - Part 10: Test method for the determination of adhesion and cohesion following continuous extension and compression
Language:
standard ikon pdf
SS-EN 12274-4:2018
Slurry surfacing - Test methods - Part 4: Determination of cohesion of the mix
Language:
standard ikon pdf
SS-EN 1431:2018
Bitumen and bituminous binders - Determination of residual binder and oil distillate from bitumen emulsions by distillation
Language:
standard ikon pdf
SS-EN 12274-5:2018
Slurry surfacing - Test method - Part 5: Determination of the minimum binder content and wearing resistance
Language:
standard ikon pdf
SS-EN 12274-3:2018
Slurry surfacing - Test methods - Part 3: Consistency
Language:
standard ikon pdf
SS-EN 12274-6:2018
Slurry surfacing - Test methods - Part 6: Rate of application
Language:
standard ikon pdf
SS-EN 12274-2:2018
Slurry surfacing - Test methods - Part 2: Determination of residual binder content including preparation of samples
Language:
standard ikon pdf
SS-EN 12274-1:2018
Slurry surfacing - Test methods - Part 1: Sampling of slurry surfacing mixture
Language:
standard ikon pdf
SS-EN 12697-10:2018
Bituminous mixtures - Test methods - Part 10: Compactability
Language:
standard ikon pdf
SS-EN 13398:2017
Bitumen and bituminous binders - Determination of the elastic recovery of modified bitumen
Language:
standard ikon pdf
SS-EN 13399:2017
Bitumen and bituminous binders - Determination of storage stability of modified bitumen
Language:
standard ikon pdf
SS-EN 12697-13:2017
Bituminous mixtures - Test methods - Part 13: Temperature measurement
Language:
standard ikon pdf
SS-EN 13588:2017
Bitumen and bituminous binders - Determination of cohesion of bituminous binders with pendulum test
Language:
standard ikon pdf
SS-EN 13108-4:2016/AC:2017
Bituminous mixtures - Material specifications - Part 4: Hot Rolled Asphalt
Language:
standard ikon pdf
SS-EN 13303:2017
Bitumen and bituminous binders - Determination of the loss in mass after heating of industrial bitumen
Language:
standard ikon pdf
SS-EN 12697-18:2017
Bituminous mixtures - Test methods - Part 18: Binder drainage
Language:
standard ikon pdf
SS-EN 12697-27:2017
Bituminous mixtures - Test methods - Part 27: Sampling
Language:
standard ikon pdf
SS-EN 14187-1:2017
Cold applied joint sealants - Test methods - Part 1: Determination of rate of cure
Language:
standard ikon pdf
SS-EN ISO 11819-2:2017
Acoustics - Measurement of the influence of road surfaces on traffic noise - Part 2: The close-proximity method (ISO 11819-2:2017)
Language:
standard ikon pdf
SS-EN 14187-6:2017
Cold applied joint sealants - Test method - Part 6: Determination of the adhesion/cohesion properties after immersion in test fuels and liquid chemicals
Language:
standard ikon pdf
SS-EN 14187-3:2017
Cold applied joint sealants - Test methods - Part 3: Determination of self-levelling properties
Language:
standard ikon pdf
SS-EN 14187-4:2017
Cold applied joint sealants - Test methods - Part 4: Determination of the change in mass and volume after immersion in test fuels and liquid chemicals
Language:
standard ikon pdf
SS-EN 14187-2:2017
Cold applied joint sealants - Test methods - Part 2: Determination of tack free time
Language:
standard ikon pdf
SS-EN 14187-8:2017
Cold applied joint sealants - Test methods - Part 8: Determination of the artificial weathering by UV-irradiation
Language:
standard ikon pdf
SS-EN 12697-17:2017
Bituminous mixtures - Test methods - Part 17: Particle loss of porous asphalt specimens
Language:
standard ikon pdf
SS-EN 13587:2016
Bitumen and bituminous binders - Determination of the tensile properties of bituminous binders by the tensile test method
Language:
standard ikon pdf
SS-EN 13075-2:2016
Bitumen and bituminous binders - Determination of breaking behaviour - Part 2: Determination of fines mixing time of cationic bituminous emulsions
Language:
standard ikon pdf
SS-EN 13075-1:2016
Bitumen and bituminous binders - Determination of breaking behaviour - Part 1: Determination of breaking value of cationic bituminous emulsions, mineral filler method
Language:
standard ikon pdf
SS-EN 16849:2016
Bitumen and bituminous binders - Determination of water content in bituminous emulsions - Method using a drying balance
Language:
standard ikon pdf
SS-EN 12697-25:2016
Bituminous mixtures - Test methods - Part 25: Cyclic compression test
Language:
standard ikon pdf
SS-EN 13108-21:2016
Bituminous mixtures - Material specifications - Part 21: Factory Production Control
Language:
standard ikon pdf
SS-EN 13108-20:2016
Bituminous mixtures - Material specifications - Part 20: Type Testing
Language:
standard ikon pdf
SS-EN 13108-9:2016
Bituminous mixtures - Material specifications - Part 9: Asphalt for Ultra-Thin Layer (AUTL)
Language:
standard ikon pdf
SS-EN 13108-8:2016
Bituminous mixtures - Material specifications - Part 8: Reclaimed asphalt
Language:
standard ikon pdf
SS-EN 13108-2:2016
Bituminous mixtures - Material specifications - Part 2: Asphalt Concrete for Very Thin Layers (BBTM)
Language:
standard ikon pdf
SS-EN 13108-6:2016
Bituminous mixtures - Material specifications - Part 6: Mastic Asphalt
Language:
standard ikon pdf
SS-EN 13108-4:2016
Bituminous mixtures - Material specifications - Part 4: Hot Rolled Asphalt
Language:
standard ikon pdf
SS-EN 13108-5:2016
Bituminous mixtures - Material specifications - Part 5: Stone Mastic Asphalt
Language:
standard ikon pdf
SS-EN 13108-7:2016
Bituminous mixtures - Material specifications - Part 7: Porous Asphalt
Language:
standard ikon pdf
SS-EN 13108-3:2016
Bituminous mixtures - Material specifications - Part 3: Soft Asphalt
Language:
standard ikon pdf
SS-EN 13108-1:2016
Bituminous mixtures - Material specifications - Part 1: Asphalt Concrete
Language:
standard ikon pdf
SS-EN 13924-1:2015
Bitumen and bituminous binders - Specification framework for special paving grade bitumen - Part 1: Hard paving grade bitumens
Language:
standard ikon pdf
SS-EN 14227-15:2015
Hydraulically bound mixtures - Specifications - Part 15: Hydraulically stabilized soils
Language:
standard ikon pdf
SS-EN 12606-1:2015
Bitumen and bituminous binders - Determination of the paraffin wax content - Part 1: Method by distillation
Language:
standard ikon pdf
SS-EN 12593:2015
Bitumen and bituminous binders - Determination of the Fraass breaking point
Language:
standard ikon pdf
SS-EN 12607-3:2014
Bitumen and bituminous binders - Determination of the resistance to hardening under influence of heat and air - Part 3: RFT method
Language:
standard ikon pdf
SS-EN 12592:2014
Bitumen and bituminous binders - Determination of solubility
Language:
standard ikon pdf
SS-EN 12607-2:2014
Bitumen and bituminous binders - Determination of the resistance to hardening under influence of heat and air - Part 2: TFOT method
Language:
standard ikon pdf
SIS-CEN/TS 13286-54:2014
Unbound and hydraulically bound mixtures - Part 54: Test method for the determination of frost susceptibility - Resistance to freezing and thawing of hydraulically bound mixtures
Language:
standard ikon pdf
SIS-CEN/TS 15963:2014
Bitumen and bituminous binders - Determination of the fracture toughness temperature by a three point bending test on a notched specimen
Language:
standard ikon pdf
SS-EN 13924-2:2014
Bitumen and bituminous binders - Specification framework for special paving grade bitumen - Part 2: Multigrade paving grade bitumens
Language:
standard ikon pdf
SS-EN 1429:2013
Bitumen and bituminous binders - Determination of residue on sieving of bituminous emulsions, and determination of storage stability by sieving
Language:
standard ikon pdf
SS-EN 13286-2:2010/AC:2013
Unbound and hydraulically bound mixtures - Part 2: Test methods for laboratory reference density and water content - Proctor compaction
Language:
standard ikon pdf
SS-EN 14227-5:2013
Hydraulically bound mixtures - Specifications - Part 5: Hydraulic road binder bound granular mixtures
Language:
standard ikon pdf
SS-EN 14227-3:2013
Hydraulically bound mixtures - Specifications - Part 3: Fly ash bound granular mixtures
Language:
standard ikon pdf
SS-EN 14227-2:2013
Hydraulically bound mixtures - Specifications - Part 2: Slag bound granular mixtures
Language:
standard ikon pdf
SS-EN 15322:2013
Bitumen and bituminous binders - Framework for specifying cut-back and fluxed bituminous binders
Language:
standard ikon pdf
SS-EN 13808:2013
Bitumen and bituminous binders - Framework for specifying cationic bituminous emulsions
Language:
standard ikon pdf
SS-EN 14227-4:2013
Specifications - Part 4: Fly ash for hydraulically bound mixtures
Language:
standard ikon pdf
SS-EN 14227-1:2013
Hydraulically bound mixtures - Specifications - Part 1: Cement bound granular mixtures
Language:
standard ikon pdf
SS-EN 14227-1:2013
Hydraulically bound mixtures - Specifications - Part 1: Cement bound granular mixtures
Language:
standard ikon pdf
SS-EN 16345:2012
Bitumen and bituminous binders - Determination of efflux time of bituminous emulsions using the Redwood No. II Viscometer
Language:
standard ikon pdf
SS-EN 1425:2012
Bitumen and bituminous binders - Characterization of perceptible properties
Language:
standard ikon pdf
SS-EN 13863-4:2012
Concrete pavements - Part 4: Test methods for the determination of wear resistance of concrete pavements to studded tyres
Language:
standard ikon pdf
SS-EN 58:2012
Bitumen and bituminous binders - Sampling bituminous binders
Language:
standard ikon pdf
SS-EN 1428:2012
Bitumen and bituminous binders - Determination of water content in bituminous emulsions - Azeotropic distillation method
Language:
standard ikon pdf
SS-EN 13036-4:2011
Road and airfield surface characteristics - Test methods - Part 4: Method for measurement of slip/skid resistance of a surface: The pendulum test
Language:
standard ikon pdf
SS-EN 13286-2:2010
Unbound and hydraulically bound mixtures - Part 2: Test methods for laboratory reference density and water content - Proctor compaction
Language:
standard ikon pdf
SS-EN 13036-1:2010
Road and airfield surface characteristics - Test methods - Part 1: Measurement of pavement surface macrotexture depth using a volumetric patch technique
Language:
standard ikon pdf
SS-EN 13632:2010
Bitumen and bituminous binders - Visualisation of polymer dispersion in polymer modified bitumen
Language:
standard ikon pdf
SS-EN 14023:2010
Bitumen and bituminous binders - Specification framework for polymer modified bitumens
Language:
standard ikon pdf
SS-EN 13301:2010
Bitumen and bituminous binders - Determination of staining tendency of bitumen
Language:
standard ikon pdf
SS-EN 14188-4:2009
Joint fillers and sealants - Part 4: Specifications for primers to be used with joint sealants
Language:
standard ikon pdf
SS-EN 15326:2007+A1:2009
Bitumen and bituminous binders - Measurement of density and specific gravity - Capillary-stoppered pyknometer method
Language:
standard ikon pdf
SS-EN 12591:2009
Bitumen and bituminous binders - Specifications for paving grade bitumens
Language:
standard ikon pdf
SS-EN 12849:2009
Bitumen and bituminous binders - Determination of penetration power of bituminous emulsions
Language:
standard ikon pdf
SS-EN 12848:2009
Bitumen and bituminous binders - Determination of mixing stability with cement of bituminous emulsions
Language:
standard ikon pdf
SS-EN 13305:2009
Bitumen and bituminous binders - Framework for specification of hard industrial bitumens
Language:
standard ikon pdf
SS-EN 13304:2009
Bitumen and bituminous binders - Framework for specification of oxidised bitumens
Language:
standard ikon pdf
SS-EN 1430:2009
Bitumen and bituminous binders - Determination of particle polarity of bitumen emulsions
Language:
standard ikon pdf
SS-EN 12273:2008
Slurry surfacing - Specifications
Language:
standard ikon pdf
SS-EN 13036-6:2008
Road and airfield surface characteristics - Test methods - Part 6: Measurement of transverse and longitudinal profiles in the evenness and megatexture wavelength ranges
Language:
standard ikon pdf
SS-EN 15323:2007
Bitumen and bituminous binders - Accelerated long-term ageing/conditioning by the rotating cylinder method (RCAT)
Language:
standard ikon pdf
SS-EN 12271:2006
Surface dressing - Requirements
Language:
standard ikon pdf
SS-EN 14188-3:2006
Joint fillers and sealants - Part 3: Specifications for preformed joint seals
Language:
standard ikon pdf
SS-EN 14840:2005
Joint fillers and sealants - Test methods for preformed joint seals
Language:
standard ikon pdf
SS-EN 12274-8:2005
Slurry surfacing - Test methods - Part 8: Visual assessment of defects
Language:
standard ikon pdf
SS-EN 13286-48:2005
Unbound and hydraulically bound mixtures - Part 48: Test method for the determination of degree of pulverisation
Language:
standard ikon pdf
SS-EN 12274-7:2005
Slurry surfacing - Test methods - Part 7: Shaking abrasion test
Language:
standard ikon pdf
SS-EN 14188-2:2005
Joint fillers and sealants - Part 2: Specifications for cold applied sealants
Language:
standard ikon pdf
SS-EN 13286-52:2005
Unbound and hydraulically bound mixtures - Part 52: Method for the manufacture of test specimens of hydraulically bound mixtures using vibrocompression
Language:
standard ikon pdf
SS-EN 13286-51:2005
Unbound and hydraulically bound mixtures - Part 51: Method for the manufacture of test specimens of hydraulically bound mixtures using vibrating hammer compaction
Language:
standard ikon pdf
SS-EN 13286-50:2005
Unbound and hydraulically bound mixtures - Part 50: Method for the manufacture of test specimens of hydraulically bound mixtures using Proctor equipment or vibrating table compaction
Language:
standard ikon pdf
SS-EN 13286-53:2005
Unbound and hydraulically bound mixtures - Part 53: Methods for the manufacture of test specimens of hydraulically bound mixtures using axial compression
Language:
standard ikon pdf
SS-EN 13877-3:2004
Concrete pavements - Part 3: Specifications for dowels to be used in concrete pavements
Language:
standard ikon pdf
SS-EN 13863-3:2004
Concrete pavements - Part 3: Test methods for the determination of the thickness of a concrete pavement from cores
Language:
standard ikon pdf
SS-EN 14188-1:2004
Joint fillers and sealants - Part 1: Specifications for hot applied sealants
Language:
standard ikon pdf
SS-EN 12697-38:2004
Bituminous mixtures - Test methods for hot mix asphalt - Part 38: Common equipment and calibration
Language:
standard ikon pdf
SS-EN 13286-49:2004
Unbound and hydraulically bound mixtures - Part 49: Accelerated swelling test for soil treated by lime and/or hydraulic binder
Language:
standard ikon pdf
SS-EN 13286-7:2004
Unbound and hydraulically bound mixtures - Part 7: Cyclic load triaxial test for unbound mixtures
Language:
standard ikon pdf
SS-EN 13286-45:2004
Unbound and hydraulically bound mixtures - Part 45: Test method for the determination of the workability period of hydraulically bound mixtures
Language:
standard ikon pdf
SS-EN 13863-1
Concrete pavements - Part 1: Test method for the determination of the thickness of a concrete pavement by survey method
Language:
standard ikon pdf
SS-EN 13863-2
Concrete pavements - Part 2: Test method for the determination of the bond between two layers
Language:
standard ikon pdf
SS-EN 13880-2
Hot applied joint sealants - Part 2: Test method for the determination of cone penetration at 25°C
Language:
standard ikon pdf
SS-EN 13880-12
Hot applied joint sealants - Part 12: Test method for the manufacture of concrete test blocks for bond testing (recipe methods)
Language:
standard ikon pdf
SS-EN 13880-1
Hot applied joint sealants - Part 1: Test method for the determination of density at 25°C
Language:
standard ikon pdf
SS-EN 13036-7
Road and airfield surface characteristics - Test methods - Part 7: Irregularity measurement of pavement courses: the straightedge test
Language:
standard ikon pdf
SS-EN 13880-9
Hot applied joint sealants - Part 9: Test method for the determination of compatibility with asphalt pavements
Language:
standard ikon pdf
SS-EN 12272-2
Surface dressing - Test methods - Part 2: Visual assessment of defects
Language:
standard ikon pdf
SS-EN 13286-44
Unbound and hydraulically bound mixtures - Part 44: Test method for the determination of the alpha coefficient of vitrified blast furnace slag
Language:
standard ikon pdf
SS-EN 13286-5
Unbound and hydraulically bound mixtures - Part 5: Test methods for laboratory reference density and water content - Vibrating table
Language:
standard ikon pdf
SS-EN 13286-40
Unbound and hydraulically bound mixtures - Part 40: Test method for the determination of the direct tensile strength of hydraulically bound mixtures
Language:
standard ikon pdf
SS-EN 13286-42
Unbound and hydraulically bound mixtures - Part 42: Test method for the determination of the indirect tensile strength of hydraulically bound mixtures
Language:
standard ikon pdf
SS-EN 13286-3
Unbound and hydraulically bound mixtures - Part 3: Test methods for laboratory reference density and water content - Vibrocompression with controlled parameters
Language:
standard ikon pdf
SS-EN 13286-46
Unbound and hydraulically bound mixtures - Part 46: Test method for the determination of the moisture condition value
Language:
standard ikon pdf
SS-EN 13286-43
Unbound and hydraulically bound mixtures - Part 43: Test method for the determination of the modulus of elasticity of hydraulically bound mixtures
Language:
standard ikon pdf
SS-EN 13036-3
Road and airfield surface characteristics - Test methods - Part 3: Measurement of pavement surface horizontal drainability
Language:
Show more Show less
Working group 8 workgroups
SIS/TK 202/AG 01, Asfalt
SIS/TK 202/AG 02, Ytbehandling/Slurry
SIS/TK 202/AG 03, Betongbeläggningar
SIS/TK 202/AG 04, Obundet och hydrauliskt bundet vägmaterial
SIS/TK 202/AG 05, Vägytans egenskaper
SIS/TK 202/AG 06, Fogar
SIS/TK 202/AG 07, Flygfält
SIS/TK 202/AG 08, Bitumen
Show more Show less
Participants 25 companies and organizations
Arrb Systems, Malmö
DNV Business Assurance Sweden AB, Solna
Fortifikationsverket, Eskilstuna
Fortifikationsverket, Luleå
Gjutasfaltföreningen i Sverige, Vendelsö
Henrik Broms Konsult AB, Hässelby
NCC Industry AB, Umeå
NCC Industry AB Sverige Öst, Upplands Väsby
Nynas AB, Johanneshov
Nynas AB, Nynäshamn
Peab Asfalt AB, Helsingborg
Peab Asfalt AB, Hisings Backa
RISE Research Institutes of Sweden AB, Borås
SARSYS AB, Köpingebro
Skanska Industrial Solutions AB, Gunnilse
Skanska Industrial Solutions AB, Örebro
Skanska Sverige AB, Farsta
Skanska Sverige AB, Malmö
Swedavia AB Norrköpings Flygplats, Norrköping
Swedavia AB Stockholm Arlanda Airport, Stockholm-Arlanda
TotalEnergies Marketing Sweden AB, Malmö
Trafikverket, Eskilstuna
Trafikverket, Borlänge
Trafikverket Trafikledningsområde Väst, Göteborg
VTI, Statens väg- och transportforskningsinstitut, Linköping
Show more Show less
International participation 11 international committees
CEN/TC 227, Road materials
SIS/TK 202/AG 01, Asfalt:

CEN/TC 227/WG 1, Bituminous mixtures

CEN/TC 227/WG 6, Sustainability

SIS/TK 202/AG 02, Ytbehandling/Slurry:

CEN/TC 227/WG 2, Surface Dressing, Sprays and Slurry Surfacing (incorporating Microsurfacing)

SIS/TK 202/AG 03, Betongbeläggningar:

CEN/TC 227/WG 3, Materials for concrete roads including joint fillers and sealants

SIS/TK 202/AG 04, Obundet och hydrauliskt bundet vägmaterial:

CEN/TC 227/WG 4, Hydraulic bound and unbound mixtures (including byproducts and waste materials)

SIS/TK 202/AG 05, Vägytans egenskaper:

CEN/TC 227/WG 5, Surface characteristics

SIS/TK 202/AG 06, Fogar:

CEN/TC 227/WG 3, Materials for concrete roads including joint fillers and sealants

SIS/TK 202/AG 08, Bitumen:

CEN/TC 336, Bitumens and bituminous binders

CEN/TC 336/WG 1, Bituminous binders for paving

CEN/TC 336/WG 2, Fluxed bitumen and bituminous emulsions

Show more Show less
Läs mer

Påverka nationellt och internationellt

Kommittén skapar ett forum för svenskt agerande i den europeiska standardiseringen, genom att vi aktivt medverkar i den europeiska standardiseringsorganisationen CEN. Eftersom standarderna är kopplade till EU-direktivet, underlättar dessa vid både tillverkning, inköp och användande av produkterna. Standardiseringsarbetet säkerställer därmed att produkterna tillverkas efter samstämmiga krav, som exempelvis föreskrivare kan hänvisa till redan i anbudsskedet. Ett arbete som skapar fri rörlighet och konkurrens av produkter mellan länder, vilket stödjer den svenska exportmarknaden. 

Ett värdefullt arbete

I kommittén samlas expertkunskap genom representanter från vägentreprenörer, väghållare, laboratorier, tillverkare och myndigheter. Standardiseringsarbetet ger deltagarna djupare insikt om standardernas krav och hur man resonerar kring dessa, vilket underlättar vid diskussion med olika parter inom branschen. Deltagarna är samtidigt med och påverkar framtidens standarder, vilket också leder till nya insikter och tidig information som kan omsättas i den egna verksamhetsutvecklingen. 

Vill du vara med i kommittén?

Du är välkommen att delta i SIS tekniska kommitté för vägmaterial. Kanske att du idag jobbar som tillverkare, föreskrivare, köpare, brukare eller med annat inom branschen. Om du är intresserad av att delta, kan du kontakta oss så berättar vi mer om arbetet. Läs mer om kommittéarbete inom SIS här.

Subjects

General (93.080.01) Road construction materials (93.080.20)

För dig som är kommittédeltagare

Klicka här för att ta dig till kommitténs digitala arbetsyta i SIS Deltagarportal.

Contact

If you have questions or want to know more about the SIS standardization activities? Please contact us.

Christa Windefalk Ahlenblom
Project manager
christa.ahlenblom@sis.se

Benitha Pilley
Project coordinator
benitha.pilley@sis.se

Kenneth Lind
Chairman
Trafikverket