ISO/FDIS 5660-5, Reaction-to-fire tests — Heat release, smoke production and mass loss rate — Part 5: Heat release rate (cone calorimeter method) and smoke production rate (dynamic measurement) under reduced oxygen atmospheres (50.20)
ISO/DTR 24488, Road tunnel fire safety — Overview of regulatory frameworks and research (50.20)
ISO/DTS 17755-2, Fire safety — Statistical data collection — Part 2: Vocabulary (50.00)
ISO/DTS 6300, Interpretation of fire effluents analysis using FTIR spectroscopy (50.00)
ISO/FDIS 13571-3, Life-threatening components of fire — Part 3: Guidelines for a method based on lethality endpoints for the estimation of time to compromised escape capability from exposure to smoke toxicants (50.00)
FprEN 1364-1, Fire resistance tests for non-loadbearing elements - Part 1: Walls (45.99)
ISO/DIS 13784-1, Reaction to fire test for sandwich panel building systems — Part 1: Small room test (40.99)
ISO/DIS 20710-2, Fire safety engineering — Active fire protection systems — Part 2: Estimation of heat detection time (40.60)
ISO/DIS 22899-2, Determination of the resistance to jet fires of passive fire protection materials — Part 2: Guidance on test method selection and implementation methods (40.60)
ISO/DIS 24944, Standardized post-fire data collection methods from large outdoor fires (40.60)
EN 15269-20:2020/prA1, Extended application of test results for fire resistance and/or smoke control for door, shutter and openable window assemblies, including their elements of building hardware - Part 20: Smoke control for doors, shutters, operable fabric curtains and openable windows (40.60)
prEN 1366-14, Fire resistance tests for service installations - Part 14: Partial penetration seals (40.60)
prEN 15254-3, Extended application of results from fire resistance tests - Non-loadbearing walls - Part 3: Lightweight partitions (40.60)
prEN 15269-12, Extended application of test results for fire resistance and/or smoke control for door, shutter and openable window assemblies, including their elements of building hardware - Part 12: Fire resistance of composite doors (40.60)
prEN 13381-7, Test methods for determining the contribution to the fire resistance of structural members - Part 7: Applied protection to timber members (40.60)
SIS-INSTA/TS 950, Fire Safety Engineering - Comparative method to verify fire safety design in buildings (40.25)
prEN 1366-1, Fire resistance tests for service installations - Part 1: Ventilation ducts (40.20)
ISO/DIS 13943, Fire safety — Vocabulary (40.20)
prEN ISO 13943, Fire safety - Vocabulary (ISO/DIS 13943:2026) (40.20)
prEN 1363-2, EN 1363-2 Fire resistance tests - Part 2: Alternative and additional procedures (40.10)
prEN 1366-13 rev, Fire resistance tests for service installations - Part 13: Chimneys (30.99)
ISO/CD 26367-4, Assessing the environmental impact of fire — Part 4: Incorporating fires into models of environmental impact (30.60)
ISO/CD 6944-1, Fire containment — Elements of building construction — Part 1: Ventilation ducts (30.60)
ISO/CD 834-2, Fire-resistance tests — Elements of building construction — Part 2: Requirements and recommendations for measuring furnace exposure on test samples (30.60)
ISO/CD TR 13571-4, Life-threatening components of fire — Part 4: Comparison of models (30.60)
ISO/CD TR 23801, Fire safety engineering – Concept and example applications of risk-based fire safety design of buildings (30.60)
ISO/CD TR 25154, Fire safety engineering - Introducing digital workflows through Building Information Modelling (30.60)
ISO/CD TR 26367-5, Assessing the adverse environmental impact of fire effluents — Part 5: Semi-Quantitative estimation of the decomposition products related to chemical and petroleum industry released in fire (30.60)
ISO/CD TR 26368, Environmental damage limitation from fire-fighting water run-off (30.60)
ISO/CD TR 29903-2, Comparison of toxic gas data from different tests — Part 2: Examples of application (30.60)
ISO/CD TS 19471, Monitoring and mitigation of fire laboratory emissions (30.60)
ISO/CD TS 24273, Fire safety engineering — Guidance for use of CFD calculation methods (30.60)
ISO/CD TS 25399, Large Outdoor Fires and the Built Environment: harmonizing the test methods for thermal flux exposure (30.60)
ISO/CD TS 25492, Fire threat to people — Estimation of toxic gas emissions in building fires (30.60)
ISO/CD TS 5660-3, Reaction-to-fire tests — Heat release, smoke production and mass loss rate — Part 3: Guidance on measurement (30.60)
ISO/CD 24678-8, Fire Safety Engineering — Requirements Governing Algebraic formulae — Part 8: Flame spread on a solid surface (30.00)
-, Reaction to fire - Roof coverings - Zero impressed irradiance (20.60)
ISO/AWI TR 25885, Health effects of fire aerosols on human populations (20.00)
ISO/AWI TS 17755-3, Fire safety — Statistical data collection — Part 3: Statistical data collection methods (20.00)
ISO/AWI TS 19850, Fire tests — Use of LED (light-emitting diode) as an alternative to white light for measuring smoke parameters (20.00)
ISO/AWI TS 23657, Reaction to fire test for sandwich panel building systems — Intermediate-scale box test (20.00)
ISO/AWI TS 24909, Fire tests — Guidance on the use of thermocouples (20.00)
ISO/AWI TS 26520, Modelling Approaches for Large Outdoor Fires (20.00)
ISO/AWI 19021, Test method for determination of gas concentrations in ISO 5659 using Fourier transform infrared spectroscopy (20.00)
prCEN/TR 18428, TR to support EN 13823 (10.99)
prCEN/TS 15117 rev, Guidance on direct and extended application (10.99)
prCEN/TS 18426-1, Fire Safety Engineering - Performance-based fire safety inspection of buildings – Part 1 Principles, Process and reporting requirements (10.99)
prEN 1364-3, EN 1364-3 Fire resistance tests for non-loadbearing elements — Part 3: Curtain walling - Full configuration (complete assembly) (10.99)
prEN 13823 rev, Reaction to fire tests for building products - Building products excluding floorings exposed to the thermal attack by a single burning item (10.99)
-, Test requirements for fire-protection storage cabinets for lithium-ion batteries in the case of thermal runaway (10.99)
EN 13501-2:2023+, Fire classification of construction products and building elements - Part 2: Classification using data from fire resistance and/or smoke control tests, excluding ventilation services (10.99)
EN 1364-6:2025/prA1, Fire resistance tests for non-loadbearing elements - Part 6: Open-state cavity barriers (10.99)
EN 13823:2020+A1:2022/prA2, Reaction to fire tests for building products - Building products excluding floorings exposed to the thermal attack by a single burning item (10.99)
ISO/AWI TR 25884, Subincapacitating effects of fire effluents on human health and safety (10.99)
prEN 1634-3 rev, Fire resistance and smoke control tests for door and shutter assemblies, openable windows and elements of building hardware - Part 3: Smoke control test for door and shutter assemblies (10.99)
prEN 15269-6, prEN 15269-6 Extended application of test results for fire resistance and/or smoke control for door, shutter and openable window assemblies, including their elements of building hardware - Part 6: Fire resistance of sliding timber doorsets (10.99)
prEN 15882-6, EN 15882-6 ‘Extended application of results from fire resistance tests for service installations - Part 6: Smoke Control Dampers’ (10.99)
prEN 1634-1 rev, Fire resistance and smoke control tests for door and shutter assemblies, openable windows and elements of building hardware - Part 1: Fire resistance test for door and shutter assemblies and openable windows (10.99)
ISO/NP TS 21721, Fire resistance — Guidance on the calculation of asymmetrical partitions/vertical membranes with respect to their fire resistance performance (10.60)
ISO/NP TS 24863, Fire safety engineering — Design fires in mass timber enclosures (10.20)
ISO/NP 16733-4, Fire safety engineering — Selection of design fire scenarios and design fires — Part 4: Part 4: Design Fire scenario for Energy Storage System (10.20)
ISO/NP 16733-6, Fire safety engineering — Selection of design fire scenarios and design fires — Part 6: Part 6: Design Fires for Energy Storage Systems (10.20)
ISO/NP 24269, Reaction to fire test for sandwich panel building systems — Part 1: Small room test, Alternative burner for 13784-1 (10.20)
ISO/NP 24486, Reaction to fire test — Measurement of heat and smoke in cavity wall fires (10.20)
prEN 1187, Test methods for external fire exposure to roofs (00.60)
prEN 13381-3 rev, Test methods for determining the contribution to the fire resistance of structural members - Part 3: Applied protection to concrete members (00.60)
prEN 13381-4 rev, Test methods for determining the contribution to the fire resistance of structural members - Part 4: Applied passive protection to steel members (00.60)
prEN 13381-7 rev, Test methods for determining the contribution to the fire resistance of structural members - Part 7: Applied protection to timber members (00.60)
prEN 13381-8 rev, Test methods for determining the contribution to the fire resistance of structural members - Part 8: Applied reactive protection to steel members (00.60)
prEN 13501-1 rev, EN 13501-1 Fire classification of construction products and building elements - Part 1: Classification using data from reaction to fire tests (00.60)
prEN 13501-4 rev, Fire classification of construction products and building elements - Part 4: Classification using data from fire resistance tests on components of smoke control systems (00.60)
prEN 13501-5 rev, Fire classification of construction products and building elements - Part 5: Classification using data from external fire exposure to roofs tests (00.60)
prEN 15254-4 rev, Extended application of results from fire resistance tests - Non-loadbearing walls - Part 4: Glazed constructions (00.60)
prEN 15269-1 rev, Extended application of test results for fire resistance and/or smoke control for door, shutter and openable window assemblies, including their elements of building hardware - Part 1: General requirements (00.60)
prEN 15269-11 rev, Extended application of test results for fire resistance and/or smoke control for door, shutter and openable window assemblies, including their elements of building hardware - Part 11: Fire resistance for operable fabric curtains (00.60)
-, Fire resistance tests for non-loadbearing elements — Part 7: Closed-state cavity barriers (00.60)
-, Relation between the rules in Eurocode Timber Structures EN 1995-1-2 and the test method for determining the contribution to the fire resistance of applied protection to timber structural members in EN 13381-7. (00.60)
-, Test method(s) for assessing impact on external fire performance of roof systems in combination with photovoltaic modules applied/attached above the roof system (00.60)
prEN 15269-7 rev, Extended application of test results for fire resistance and/or smoke control for door, shutter and openable window assemblies, including their elements of building hardware - Part 7: Fire resistance for steel sliding doorsets (00.60)
prEN 15882-3 rev, Extended applications of results from fire resistance tests for service installations - Part 3: Penetration seals (00.60)
prEN 15269-13, 'Extended application of test results for fire resistance and/or smoke control for door, shutter and openable window assemblies, including their elements of building hardware - Part 13: Sectional doors'. (00.60)
prEN 1634-2 rev, Fire resistance and smoke control tests for door, shutter and openable window assemblies and elements of building hardware - Part 2: Fire resistance characterisation test for elements of building hardware (00.60)
prEN 16733 rev, Reaction to fire tests for building products - Determination of a building product's propensity to undergo continuous smouldering (00.60)
prEN XXX, Fire safety – Facades – Test method (00.60)
ISO/PWI 16211.2, Roadmap and Guidance for Façade Fire testing and Assessment (00.00)
ISO/PWI 16733-5, Fire safety engineering - Selection of design fire scenarios and design fires — Part 5: Design fires for Road Vehicles in an Enclosed Parking Garage (00.00)
ISO/PWI 26285, Application of quality management systems for fire safety engineering studies (00.00)
ISO/PWI 26577, Guideline for AI-based optimal design of emergency broadcasting speakers in tunnel fire (00.00)
ISO/PWI 26767, Fire safety engineering — Procedure for data collection and training of AI-based fire recognition models (00.00)
ISO/PWI TR 13571-2, Life-threatening components of fire — Part 2: Methodology and examples of tenability assessment (00.00)
ISO/PWI TR 24905, Conversion of fire test data for FSE (00.00)
