1. Start

Standard Technical specification · SIS-CEN/TS 16663:2016

Durability of wood and wood-based products - Determination of emissions from preservative treated wood to the environment - Wooden commodities exposed in Use Class 3 (Not covered, not in contact with the ground) - Semi-field method

Status: Valid

Tell a colleague about

Scope
This Technical Specification specifies a method for determining the leaching of active ingredients or other compounds from treated wood by a semi-field method for use class 3 (outdoor above ground). The preservative treated wood can be tested with or without subsequently surface coating or other water-repellent treatment. The method is applicable to the testing of commercial or experimental preservatives or paint systems applied to timber by methods appropriate to commercial practice.

Subjects

Environmental impact assessment Wood-protecting chemicals

Product information

Language: English

Written by: Beständighet, SIS/TK 182/AG 03

International title: Durability of wood and wood-based products - Determination of emissions from preservative treated wood to the environment - Wooden commodities exposed in Use Class 3 (Not covered, not in contact with the ground) - Semi-field method

Article no: STD-8023833

Edition: 1

Approved: 12/1/2016

No of pages: 28

Replaces: SIS-CEN/TR 16663:2014

Related

Standards
SS-EN 62542 Environmental standardization for electrical and electronic products and systems - Glossary of terms
SS-EN 113 Wood preservatives - Test method for determining the protective effectiveness against wood destroying basiomycetes - Determination of the toxic values
SS-EN 62321-5 Determination of certain substances in electrotechnical products - Part 5: Cadmium, lead and chromium in polymers and electronics and cadmium and lead in metals by AAS, AFS, ICP-OES and ICP-MS
Technical Committee
SIS/TK 182 Trä
Swedish Institute for Standards
Box 45443, SE-104 31 Stockholm
Sweden
+46 8-555 520 00
info@sis.se

Visiting address: Solnavägen 1E, 113 65 Stockholm.
LinkedIn
Copyright Disclaimer
Report error on page