Standard Swedish standard · SS-ISO 23274-2:2012

Hybrid-electric road vehicles - Exhaust emissions and fuel consumption measurements - Part 2: Externally chargeable vehicles (ISO 23274-2:2012, IDT)

Status: Valid

Scope
This part of ISO 23274 specifies a chassis dynamometer test procedure to determine the end of CD (charge-depleting) state and consumed electric energy during CD state.

The identification of the end of CD state is an important step for procedures to determine exhaust emissions and fuel consumption. Final determination of exhaust emissions and fuel consumption is not included in this part of ISO 23274.

This part of ISO 23274 applies to vehicles with the following characteristics.
- The vehicles are hybrid-electric road vehicles (HEV) with an internal combustion engine (ICE) and the on-board rechargeable energy storage system (RESS) for vehicle propulsion which is supplied by electric energy from the stationary external power source.
- A CD state, in which the electric energy in RESS from the stationary external power source is consumed, is followed by a CS (charge-sustaining) state in which the fuel energy is consumed sustaining the electric energy of the RESS.
- Only batteries are assumed as the RESS of a vehicle.
- The RESS is not charged while driving unless by regenerative braking and/or by generating by ICE.

NOTE 1 Trolleybuses and solar powered vehicles are not included in the scope.

- The vehicle is classified as a passenger car or light duty truck, as defined in each regional annex.
- Only liquid fuels (for example, gasoline and diesel fuel) are used.

NOTE 2 In the case of vehicles with ICE using other fuel [for example, compressed natural gas (CNG), hydrogen (H2)], this part of ISO 23274 can apply except the measurement of consumed fuel; otherwise the measurement method for those using the corresponding fuel can apply.

Subjects

Electric road vehicles


Product information

Language: English

Written by: SIS - Industriteknik

International title: Hybrid-electric road vehicles - Exhaust emissions and fuel consumption measurements - Part 2: Externally chargeable vehicles (ISO 23274-2:2012, IDT)

Article no: STD-89416

Edition: 1

Approved: 10/1/2012

No of pages: 52

Replaces: SS-ISO 23274:2007