1. Start

Standard Swedish standard · SS-EN 13848-1:2019

Railway applications - Track - Track geometry quality - Part 1: Characterization of track geometry

Status: Valid

Tell a colleague about

Scope
This document gives definitions for the principal track geometry parameters and specifies minimum requirements for measurement and the analysis methods. The aim is to allow the comparability of the output of different measuring systems. This document does not apply to Urban Rail Systems.

Subjects

Railway applications Rails and railway components Construction of railways

Product information

Language: English

Written by: SIS - Industriteknik

International title: Railway applications - Track - Track geometry quality - Part 1: Characterization of track geometry

Article no: STD-80010742

Edition: 2

Approved: 4/2/2019

No of pages: 60

Replaces: SS-EN 13848-1:2004+A1:2008

Related

Standards
SS-EN 16922:2017 Railway applications - Ground based services - Vehicle waste water discharge equipment
SS-EN 14730-2:2006 Railway applications - Track - Aluminothermic welding of rails - Part 2: Qualification of aluminothermic welders, approval of contractors and acceptance of welds
SS-EN 16727-1:2018 Railway applications - Track - Noise barriers and related devices acting on airborne sound propagation - Non-acoustic performance - Part 1: Mechanical performance under static loadings - Calculation and test method
Swedish Institute for Standards
Box 45443, SE-104 31 Stockholm
Sweden
+46 8-555 520 00
info@sis.se

Visiting address: Solnavägen 1E, 113 65 Stockholm.
LinkedIn
Copyright Disclaimer
Report error on page