Standard Swedish standard · SS-EN ISO 17641-2:2005

Destructive tests on welds in metallic materials - Hot cracking tests for weldments - Arc welding processes - Part 2: Self-restraint tests (ISO 17641-2:2005)

Status: Withdrawn · Replaced by: SS-EN ISO 17641-2:2015

Scope
This standard specifies the required specimens, the test piece dimensions and the procedures to be followed to carry out self-restraint hot cracking tests. The following tests are described: -- T-joint weld cracking test -- Weld metal tensile test -- Longitudinal bend test The tests are designed to provide information about the hot cracking sensitivity of weld metals. The tests are not suitable for the assessment of parent materials. The standard applies primarily to fully austenitic stainless steels; nickel, nickel base and nickel copper weld metals. The standard can also be used for other weld metals. This standard describes only how to carry out the tests and report the results. It does not give any acceptance criteria.

Subjects

Welded joints and welds (25.160.40)


Product information

Language: English

Written by: AGS 445 Kvalifikationskrav vid svetsning, SIS/TK 134/AG 05

International title:

Article no: STD-40413

Edition: 1

Approved: 8/11/2005

No of pages: 18

Replaced by: SS-EN ISO 17641-2:2015