Standard Swedish standard · SS-EN ISO 20182:2008

Refractory test-piece preparation - Gunning refractory panels by the pneumatic-nozzle mixing type guns (ISO 20182:2008)

Status: Valid

Scope
This International Standard describes the procedure for the preparation of test panels from refractory materials by gunning through pneumatic-nozzle mixing type guns at ambient temperatures. NOTE The values obtained from test pieces cut from the panel prepared using this method may not correspond with those obtained from test pieces of the same material prepared at a gunning installation site. It does not apply to plastic gunning mixes, and may not apply to those mixes that contain aggregates that are susceptible to hydration. It also does not apply to shotcrete type mixes.

Subjects

Refractories


Product information

Language: English

Written by: SIS - Standardiseringens stöd

International title: Refractory test-piece preparation - Gunning refractory panels by the pneumatic-nozzle mixing type guns (ISO 20182:2008)

Article no: STD-64729

Edition: 1

Approved: 1/21/2008

No of pages: 20