Standard Swedish standard · SS-EN 1911:2010

Stationary source emissions - Determination of mass concentration of gaseous chlorides expressed as HCl - Standard reference method

Status: Valid

Scope
The method described in this European Standard determines the concentration of chlorinated compounds in a flue gas that – after passage of the sampling system including a particle filter – give Cl- ions in the absorption solution. This Standard Reference Method has been evaluated during field tests on waste incineration. The method applies to waste gases in which chlorides concentration expressed as HCl may vary between 1 mg·m-3 and 5 000 mg·m-3 under normal pressure and temperature conditions (see Note 1), and according to emission limit values laid down, for example, in the Council Directive 2000/76/EC on waste incineration plants.

NOTE 1 The limit values of this European Standard are expressed in mg HCl/m3, on dry basis, at the reference conditions of 273 K and 101,3 kPa and at the reference O2 concentration.

NOTE 2 The required uncertainty results from the capacity of the method tested in the field (Annex D) and in the laboratory (see performance characteristics in Tables 1 and 2 and Annex C).

Subjects

Stationary source emissions (13.040.40)


Product information

Language: English

Written by: Utsläpp, SIS/TK 423/AG 05

International title:

Article no: STD-74838

Edition: 1

Approved: 8/16/2010

No of pages: 56

Replaces: SS-EN 1911-2 , SS-EN 1911-3 , SS-EN 1911-1