ISO/FDIS 15500-1, Road vehicles — Compressed natural gas (CNG) fuel system components — Part 1: General requirements and definitions (50.00)
ISO/FDIS 15500-10, Road vehicles — Compressed natural gas (CNG) fuel system components — Part 10: Gas-flow adjuster (50.00)
ISO/FDIS 15500-11, Road vehicles — Compressed natural gas (CNG) fuel system components — Part 11: Gas/air mixer (50.00)
ISO/FDIS 15500-12, Road vehicles — Compressed natural gas (CNG) fuel system components — Part 12: Pressure relief valve (PRV) (50.00)
ISO/FDIS 15500-13, Road vehicles — Compressed natural gas (CNG) fuel system components — Part 13: Pressure relief device (PRD) (50.00)
ISO/FDIS 15500-14, Road vehicles — Compressed natural gas (CNG) fuel system components — Part 14: Excess flow valve (50.00)
ISO/FDIS 15500-15, Road vehicles — Compressed natural gas (CNG) fuel system components — Part 15: Gas-tight housing and ventilation hose (50.00)
ISO/FDIS 15500-16, Road vehicles — Compressed natural gas (CNG) fuel system components — Part 16: Rigid fuel line in stainless steel (50.00)
ISO/FDIS 15500-17, Road vehicles — Compressed natural gas (CNG) fuel system components — Part 17: Flexible fuel line (50.00)
ISO/FDIS 15500-18, Road vehicles — Compressed natural gas (CNG) fuel system components — Part 18: Filter (50.00)
ISO/FDIS 15500-19, Road vehicles — Compressed natural gas (CNG) fuel system components — Part 19: Fittings (50.00)
ISO/FDIS 15500-2, Road vehicles — Compressed natural gas (CNG) fuel system components — Part 2: Performance and general test methods (50.00)
ISO/FDIS 15500-20, Road vehicles — Compressed natural gas (CNG) fuel system components — Part 20: Rigid fuel line in material other than stainless steel (50.00)
ISO/FDIS 15500-21, Road vehicles — Compressed natural gas (CNG) fuel system components — Part 21: Discharge line closures (50.00)
ISO/FDIS 15500-23, Road vehicles — Compressed natural gas (CNG) fuel system components — Part 23: Gas temperature sensor (50.00)
ISO/FDIS 15500-3, Road vehicles — Compressed natural gas (CNG) fuel system components — Part 3: Check valve (50.00)
ISO/FDIS 15500-4, Road vehicles — Compressed natural gas (CNG) fuel system components — Part 4: Manual valve (50.00)
ISO/FDIS 15500-5, Road vehicles — Compressed natural gas (CNG) fuel system components — Part 5: Manual cylinder valve (50.00)
ISO/FDIS 15500-6, Road vehicles — Compressed natural gas (CNG) fuel system components — Part 6: Automatic valve (50.00)
ISO/FDIS 15500-7, Road vehicles — Compressed natural gas (CNG) fuel system components — Part 7: Gas injector and fuel rail (50.00)
ISO/FDIS 15500-8, Road vehicles — Compressed natural gas (CNG) fuel system components — Part 8: Pressure indicator (50.00)
ISO/FDIS 15500-9, Road vehicles — Compressed natural gas (CNG) fuel system components — Part 9: Pressure regulator (50.00)
ISO/FDIS 3405, Petroleum and related products from natural or synthetic sources — Determination of distillation characteristics at atmospheric pressure (50.00)
ISO/FDIS 4548-15, Methods of test for full-flow lubricating oil filters for internal combustion engines — Part 15: Vibration fatigue test for composite filter housings (50.00)
ISO/FDIS 6621-1, Internal combustion engines — Piston rings — Part 1: Nomenclature and classifications (50.00)
ISO/FDIS 6624-1, Internal combustion engines — Piston rings — Part 1: Keystone rings made of cast iron (50.00)
ISO/FDIS 6624-3, Internal combustion engines — Piston rings — Part 3: Keystone rings made of steel (50.00)
ISO/FDIS 7120, Petroleum products and lubricants — Petroleum oils and other fluids — Determination of rust-preventing characteristics in the presence of water (50.00)
ISO/DIS 3924, Petroleum products — Determination of boiling range distribution — Gas chromatography method (40.99)
ISO/DIS 25564, Petroleum and related products-Determination of the ignition quality of diesel fuels — Air flow regulation method (40.99)
ISO/DIS 7612, Diesel engines — Base-mounted in-line fuel injection pumps and high-pressure supply pumps for common rail fuel injection systems — Mounting dimensions (40.60)
ISO/DIS 25173, Petroleum and related products — Determination of mineral oil content in triaryl phosphate ester turbine control fluids — Saponification method (40.60)
ISO/DIS 4548-9, Methods of test for full-flow lubricating oil filters for internal combustion engines — Part 9: Inlet and outlet anti-drain valve tests (40.60)
ISO/DIS 6622-2, Internal combustion engines — Piston rings — Part 2: Rectangular rings made of steel (40.60)
ISO/DIS 3046-1, Reciprocating internal combustion engines — Performance — Part 1: Declarations of power, fuel and lubricating oil consumption, and test methods — Additional requirements for engines for general use (40.60)
ISO/DIS 3105, Petroleum products and related products — Glass capillary kinematic viscometers — Specifications and operating instructions (40.60)
ISO/DIS 17536-1, Road vehicles — Aerosol separator performance test for internal combustion engines — Part 1: General (40.60)
ISO/DIS 8528-1, Reciprocating internal combustion engine driven alternating current generating sets — Part 1: Application, ratings and performance (40.20)
ISO/DIS 7440-2, Road vehicles — Fuel injection equipment testing — Part 2: Orifice plate flow-measurement (40.20)
ISO/DIS 18669-1, Internal combustion engines — Piston pins — Part 1: General specifications (40.20)
ISO/DIS 7876-4, Fuel injection equipment — Vocabulary — Part 4: High-pressure pipes and end-connections (40.20)
ISO/DIS 16232, Road vehicles — Cleanliness of components and systems (40.00)
ISO/DIS 25949, Petroleum and related products — Determination of the scuffing temperature of lubricants — High-frequency, linear-oscillation (SRV-type) test machine (40.00)
ISO/DIS 22854, Liquid petroleum products — Determination of hydrocarbon types and oxygenates in automotive-motor gasoline — Multidimensional gas chromatography method (40.00)
ISO/DIS 7967-8, Reciprocating internal combustion engines — Vocabulary of components and systems — Part 8: Starting systems (40.00)
ISO/CD 4259-1, Petroleum and related products — Precision of measurement methods and results — Part 1: Determination of precision data in relation to methods of test (30.99)
ISO/CD 4259-3, Petroleum and related products — Precision of measurement methods and results — Part 3: Monitoring and verification of published precision data in relation to methods of test (30.99)
ISO/CD 4259-5, Petroleum and related products — Precision of measurement methods and results — Part 5: Statistical assessment of agreement between two different measurement methods that claim to measure the same property (30.99)
ISO/CD 4548-12, Methods of test for full-flow lubricating oil filters for internal combustion engines — Part 12: Filtration efficiency using particle counting and contaminant retention capacity (30.99)
ISO/CD 5163, Petroleum products — Determination of knock characteristics of motor and aviation fuels — Motor method (30.99)
ISO/CD 5164, Petroleum products — Determination of knock characteristics of motor fuels — Research method (30.99)
ISO/CD 5165, Petroleum products — Determination of the ignition quality of diesel fuels — Cetane engine method (30.99)
ISO/CD 6615, Petroleum products — Determination of carbon residue — Conradson method (30.99)
ISO/CD 6624-2, Internal combustion engines — Piston rings — Part 2: Half keystone rings made of cast iron (30.99)
ISO/CD 6624-4, Internal combustion engines — Piston rings — Part 4: Half keystone rings made of steel (30.99)
ISO/CD TS 22995-2, Petroleum and related products from natural or synthetic sources — Determination of cloud point — Part 2: Automatic linear cooling method (30.99)
ISO/CD 2909, Petroleum products — Calculation of viscosity index from kinematic viscosity (30.99)
ISO/CD 3007, Petroleum products and crude petroleum — Determination of vapour pressure — Reid method (30.99)
ISO/CD 3013, Petroleum products — Determination of the freezing point of aviation fuels (30.99)
ISO/CD 3104, Petroleum products — Transparent and opaque liquids — Determination of kinematic viscosity and calculation of dynamic viscosity (30.99)
ISO/CD 37306, Liquid petroleum products — Determination of distillation characteristics at atmospheric pressure — Micro-distillation (30.99)
ISO/CD 18335, Petroleum products and related products — Determination of kinematic viscosity by calculation from the measured dynamic viscosity and density – Method by constant pressure viscometer (30.99)
ISO/CD 18669-2, Internal combustion engines — Piston pins — Part 2: Inspection measuring principles (30.99)
ISO/CD 2160, Petroleum products — Corrosiveness to copper — Copper strip test (30.99)
ISO/CD 2207, Petroleum, synthetic and natural waxes — Determination of congealing point (30.99)
ISO/CD 25607, Testing of greases — Determination of oxidation resistance of greases — Determination of temperature dependent oxidation induction time for calculation of the Arrhenius activation energy of thermo-oxidative degradation (30.99)
ISO/CD 2592, Petroleum and related products — Determination of flash and fire points — Cleveland open cup method (30.99)
ISO/CD 25790, Road vehicles — Technical personnel dealing with liquefied petroleum gas vehicles (LPGs) — Training and qualification (30.60)
ISO/CD 12617, Road vehicles — Liquefied natural gas (LNG) refuelling connector — 3,1 MPa connector (30.60)
ISO/CD 25945, Petroleum and related products — Determination of salt content in crude oil and heavy distillates by ion chromatography (30.60)
ISO/CD 26278-1, Road vehicles — Liquified Petroleum Gas (LPG) fuel systems — Part 1: Safety requirements (30.60)
ISO/CD 26278-2, Road vehicles — Liquified Petroleum Gas (LPG) fuel systems — Part 2: Test methods (30.60)
ISO/CD 4093, Diesel engines — Fuel injection pumps — High-pressure pipes for testing (30.60)
ISO/AWI 20826, Automotive LPG components — Containers (20.00)
ISO/AWI 23608-1, Petroleum products and lubricants — Life time testing of rolling bearing greases — Part 1: Part 1: Generalities — Principle of the evaluation of upper temperature limit of use (20.00)
ISO/AWI 25077, Liquid petroleum products — Determination of trace levels of Chlorine in petroleum products by X-ray Fluorescence Spectrometry (20.00)
ISO/AWI 25845, Petroleum products — Determination of organic halogen content (20.00)
ISO/AWI 25943, Petroleum and related products- Determination of chloride ion content in phosphate ester turbine control fluids- Automatic potentiometric titration method (20.00)
ISO/AWI 26846-1, Road vehicles- Perception sensor under adverse weather conditions — Part 1: Definition, classification, and measurement of adverse weather conditions (20.00)
ISO/AWI 26846-2, Road vehicles- Perception sensor under adverse weather conditions — Part 2: Performance testing under rain and fog (20.00)
ISO/AWI 3014, Petroleum products — Determination of the smoke point of kerosine (20.00)
ISO/AWI 4259-6, Petroleum and related products — Precision of measurement methods and results — Part 6: Verification of a test apparatus performance in relation to methods of test (20.00)
ISO/AWI 6249, Petroleum products — Determination of thermal oxidation stability of gas turbine fuels (20.00)
ISO/AWI 6297, Petroleum products — Aviation and distillate fuels — Determination of electrical conductivity (20.00)
ISO/AWI 6623-1, Internal combustion engines — Piston rings — Part 1: Scraper rings made of cast iron (20.00)
ISO/AWI 6623-2, Internal combustion engines — Piston rings — Part 2: Scraper rings made of steel (20.00)
ISO/AWI 8820-4, Road vehicles — Fuse-links — Part 4: Fuse-links with female contacts (type A) and bolt-in contacts (type B) and their test fixtures (10.99)
EN ISO 15118-5:2019/prA1, Road vehicles — Vehicle to grid communication interface — Part 5: Physical layer and data link layer conformance test — Amendment 1 (10.99)
ISO/NP 25770, Petroleum products and lubricants — Determination of flow pressure of lubricating greases according to Kesternich method — Automatic method (10.60)
ISO/NP 27135, Petroleum and related products — Determination of lead, iron, and manganese content in gasoline — Energy-dispersive X-ray fluorescence spectrometry (10.20)
ISO/NP 27172, Petroleum and related products — Determination of lead, iron, and manganese content in gasoline — Inductively coupled plasma optical emission spectrometry (ICP OES) method (10.20)
ISO/NP TS 6798-4.2, Reciprocating internal combustion engines — Measurement of sound power level using sound pressure — Part 4: Part 4: Precision methods for hemi-anechoic rooms (10.20)
ISO/PWI 18826.2, Petroleum and related products — Determination of four fractions contents of heavy distillate — middle pressure liquid-phase chromatography (00.60)
ISO/PWI 12103-4, Road vehicles — Test contaminants for filter evaluation — Part 4: Agriculture-type test contaminant (00.00)
ISO/PWI 21266-1, Road vehicles — Compressed gaseous hydrogen (CGH2) and hydrogen/natural gas blends fuel systems — Part 1: Safety requirements (00.00)
ISO/PWI 21266-2, Road vehicles — Compressed gaseous hydrogen (CGH2) and hydrogen/natural gas blends fuel systems — Part 2: Test methods (00.00)
ISO/PWI 22995-2, Petroleum and related products from natural or synthetic sources — Determination of cloud point — Part 2: Automatic linear cooling method (00.00)
