Dataformat för utbyte av konfigurationsdata för industriella automationssystem (AutomationML) - Del 3: Geometri och kinematik
Status:
Gällande
Köp denna standard
StandardSvensk standard
·
SS-EN 62714-3
Dataformat för utbyte av konfigurationsdata för industriella automationssystem (AutomationML) - Del 3: Geometri och kinematik
Prenumerera på standarder med tjänst SIS Abonnemang. Genom att prenumerera får du effektiv åtkomst till gällande standarder och säkerställer att ditt företag alltid har tillgång till senaste utgåvan.
Läs mer om SIS Abonnemang
1.1 This test method describes the use of ultrasonic film thickness gages to measure accurately and nondestructively the dry film thickness of organic coatings applied over a substrate of dissimilar material. Measurements may be made on field structures, on commercially manufactured products, or on laboratory test specimens. These types of gages can accurately measure the dry film thickness of organic coatings on a variety of substrates such as concrete, wood, wallboard, plastic, fiber composites and metal. 1.2 This test method is not applicable to coatings that will be readily deformable under load of the measuring instrument as the instrument probe is placed directly on the coating surface to take a reading. 1.3 The effective range of instruments using the principle of ultrasonics is limited by gage design. A thickness range of 8 µm to 7.60 mm (0.3 to 300 mils) has been demonstrated. 1.4 The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard. 1.5 This standard does not purport to address the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use. 1.6 This international standard was developed in accordance wi
Dataformat för utbyte av konfigurationsdata för industriella automationssystem (AutomationML) - Del 3: Geometri och kinematik
Prenumerera på standarder med tjänst SIS Abonnemang. Genom att prenumerera får du effektiv åtkomst till gällande standarder och säkerställer att ditt företag alltid har tillgång till senaste utgåvan.
Läs mer om SIS Abonnemang
Internationell titel: Engineering data exchange format for use in industrial automation systems engineering - Automation markup language - Part 3: Geometry and kinematics
Artikelnummer: STD-3337635
Utgåva: 1
Fastställd: 2017-09-06
Antal sidor: 86
Inom samma område
Varorna och tjänsterna som listas nedan ligger i samma ämnesområde (ICS-kod).