Konstruktionskeramer - Keramiska kompositer - Provningsmetoder för armering - Del 7: Bestämning av fördelning av dragstyrka och dragtöjning till brott på katod i ett flerfibrigt släp vid hög temperatur
Status:
Gällande
Köp denna standard
StandardSvensk standard
·
SS-EN 1007-7:2010
Konstruktionskeramer - Keramiska kompositer - Provningsmetoder för armering - Del 7: Bestämning av fördelning av dragstyrka och dragtöjning till brott på katod i ett flerfibrigt släp vid hög temperatur
Prenumerera på standarder med tjänst SIS Abonnemang. Genom att prenumerera får du effektiv åtkomst till gällande standarder och säkerställer att ditt företag alltid har tillgång till senaste utgåvan.
Läs mer om SIS Abonnemang
This European standard specifies the conditions, apparatus and procedure for determining the distribution of tensile strength and tensile strain to failure of ceramic filaments in multifilament tows at high temperature in air, vacuum or a controlled inert atmosphere. This part of EN 1007 applies to tows of continuous ceramic filaments, which are assumed to act freely and independently under loading and behave linearly elastic up to failure.Two methods are proposed depending on the temperature of the ends of the tow: a) hot end method; NOTE 1 The application of the hot end method is restricted by ceramic glues with sufficient shear strengths at the test temperature. Current experience with this technique is limited to 1 300 °C, because of the maximum application temperature of ceramic glues. b) cold end method. NOTE 2 The cold-end method is limited to 1 700 °C in air and 2 000 °C in inert atmosphere because of the limits of furnaces. Both methods allow for a failure rate in the determination of distribution of tensile strain and tensile strength.
Konstruktionskeramer - Keramiska kompositer - Provningsmetoder för armering - Del 7: Bestämning av fördelning av dragstyrka och dragtöjning till brott på katod i ett flerfibrigt släp vid hög temperatur
Prenumerera på standarder med tjänst SIS Abonnemang. Genom att prenumerera får du effektiv åtkomst till gällande standarder och säkerställer att ditt företag alltid har tillgång till senaste utgåvan.
Läs mer om SIS Abonnemang
Internationell titel: Advanced technical ceramics - Ceramic composites - Methods of test for reinforcements - Part 7: Determination of the distribution of tensile strength and of tensile strain to failure of filaments within a multifilament tow at high temperature
Artikelnummer: STD-74570
Utgåva: 1
Fastställd: 2010-07-21
Antal sidor: 36
Inom samma område
Varorna och tjänsterna som listas nedan ligger i samma ämnesområde (ICS-kod).