Standardization · SIS/TK 998

Europeisk standardisering utan svenskt deltagande

Här kan du hitta information om europeisk standardisering som pågår i CEN utan något svenskt deltagande. SIS fastställer, publicerar och säljer samtliga standarder som utvecklas i de nationella röstningarna.

Kommittén arbetar med att bevaka de nationella röstningarna av europeiska standardiseringar i CEN och ser till att de publiceras i rätt tid. I kommitténs arbete ingår det även att förbereda nya, svenska standardiseringar inför dess publicering.

Organisationer som vill vara med och påverka europeiska standardiseringar som inte ännu finns i Sverige kan vända sig till kommittén och få den hjälp som de behöver.  

Vill du veta mer?

Välkommen att kontakta oss så berättar vi mer om pågående arbeten i kommittén och inom europeisk standardisering utan svenskt deltagande. Läs mer om kommittéarbete inom SIS här.

More information about the committèes work:

Now working on 332 standards
EN 16604-30-03, Space - Space Situational Awareness Monitoring - Part 30-03: Observation System Data Message (OSDM)
EN ISO 660, Animal and vegetable fats and oils - Determination of acid value and acidity (ISO/DIS 660:2019)
CEN/TS 17403, Fertilizers - Determination of cold water insoluble nitrogen and hot water insoluble nitrogen in solid urea formaldehyde and methylene urea slow-release fertilizers and in nutrient polymers
EN 3660-065, Aerospace series - Cable outlet accessories for circular and rectangular electrical and optical connectors - Part 065: Cable outlet, style K, 90°, for heat shrinkable boot, shielded, sealed, self-locking - Product standard
EN 3660-064, Aerospace series - Cable outlet accessories for circular and rectangular electrical and optical connectors - Part 064: Cable outlet, style K, straight, for heat shrinkable boot, shielded, sealed, self-locking - Product standard
EN 3660-063, Aerospace series - Cable outlet accessories for circular and rectangular electrical and optical connectors - Part 063: Cable outlet, style K, straight, for heat shrinkable boot, shielded, sealed, self-locking - Product standard
EN ISO 5167-6, Measurement of fluid flow by means of pressure differential devices inserted in circular cross-section conduits running full - Part 6: Wedge meters (ISO 5167-6:2019)
EN 3792, Aerospace series - Anaerobic polymerisable compounds — Technical specification
EN 4861, Aerospace series - Metrological assessment procedure for kinematic fields measured by digital image correlation
EN 3155-016, Aerospace series - Electrical contacts used in elements of connection - Part 016: Contacts, electrical, male, type A, crimp, class S - Product standard
EN 3155-045, Aerospace series - Electrical contacts used in elements of connection - Part 045: Contacts, electrical, female, type A, double crimping, class T - Product standard
EN 3155-044, Aerospace series - Electrical contacts used in elements of connection - Part 044: Contacts, electrical, male 044, type A, double crimping, class T - Product standard
EN 3155-017, Aerospace series - Electrical contacts used in elements of connection - Part 017: Contacts, electrical, relay base, female, type A, crimp, class P - Product standard
EN 3660-062, Aerospace series - Cable outlet accessories for circular and rectangular electrical and optical connectors - Part 062: Cable outlet, style K, 90°, for heat shrinkable boot, shielded, sealed, self-locking - Product standard
EN 16603-20-06, Space engineering - Spacecraft charging
EN 4866, Aerospace series - Definitions of imperfections and defects in organic matrix composite materials
EN ISO 25705, Fertilizers - Determination of urea condensates using high-performance liquid chromatography (HPLC) - Isobutylidenediurea and crotonylidenediurea (method A) and methylene-urea oligomers (method B) (ISO 25705:2016)
EN ISO 15604, Fertilizers - Determination of different forms of nitrogen in the same sample, containing nitrogen as nitric, ammoniacal, urea and cyanamide nitrogen (ISO 15604:2016)
EN ISO 15959, Fertilizers - Determination of extracted phosphorus (ISO 15959:2016)
EN ISO 25475, Fertilizers - Determination of ammoniacal nitrogen (ISO 25475:2016)
EN 6046, Aerospace series - Bearing, spherical, plain, in corrosion resisting steel - Narrow series - Dimensions and loads - Inch series
EN 9208, Aerospace series - Programme management - Expression of need - Guidance on and format for (Need) Technical Specification
EN 16603-40-07, Space engineering - Simulation modelling platform
EN 4604-006, Aerospace series - Cable, electrical, for signal transmission - Part 006: Cable, coaxial, 50 ohms, 200 °C, type WM - Product standard
EN 3475-513:2019, Aerospace series - Cables, electrical, aircraft use - Test methods - Part 513: Deformation resistance (Installation with plastic cable ties)
EN 4855-04, Aerospace series - ECO efficiency of catering equipment - Part 04: Beverage makers
EN 4855-03, Aerospace series - ECO efficiency of catering equipment - Part 03: Chilling equipment
EN 4855-02, Aerospace series - ECO efficiency of catering equipment - Part 02: Oven equipment
EN 4855-01, Aerospace series - ECO efficiency of catering equipment - Part 01: General conditions
EN ISO 8654:2018/A1, Jewellery - Colours of gold alloys - Definition, range of colours and designation - Amendment 1 (ISO 8654:2018/DAM 1:2019)
EN 1651:2018/A1, Paragliding equipment - Harnesses - Safety requirements and strength tests
EN 12491:2015/A1:2019, Paragliding equipment - Emergency parachutes - Safety requirements and test methods
EN ISO 20456, Measurement of fluid flow in closed conduits - Guidance for the use of electromagnetic flowmeters for conductive liquids (ISO 20456:2017)
EN 16234-1:2019, e-Competence Framework (e-CF) - A common European Framework for ICT Professionals in all industry sectors - Part 1: Framework
EN 17350, SCM - Scheduling and Commanding Message - Standard
EN ISO 21178, Light conveyor belts - Determination of electrical resistances (ISO/DIS 21178:2019)
EN ISO 22043, Ice-cream freezers - Classification, requirements and test conditions (ISO/DIS 22043:2019)
EN 4705, Aerospace series - Measurement methods regarding the lifetime behaviour of light units in a standardized aircraft-related environment
EN 4604-003, Aerospace series - Cable, electrical, for signal transmission - Part 003: Cable, coaxial, 50 Ohm, 200 °C, type WZ - Product standard
EN 3155-081, Aerospace series - Electrical contacts used in elements of connection - Part 081: Contacts size 22 for EN 2997, electrical, female, type A, crimp, class T - Product standard
EN 3847, Aerospace series - Paints and varnishes - Determination of sedimentation rating
EN ISO 12958-1, Geotextiles and geotextile-related products - Determination of water flow capacity in their plane - Part 1: Index test (ISO/DIS 12958-1:2019)
EN 4827, Aerospace series - Hexavalent chromium free anodizing of aluminium and aluminium alloys
EN 4234, Aerospace series - Clamps, worm drive - Dimensions, masses
EN ISO 8384, Ships and marine technology - Dredgers - Vocabulary (ISO/FDIS 8384:2019)
EN 4609, Aerospace series - Spiral drive recesses for threaded fasteners - Geometrical definition and technical requirements
EN 4708-108, Aerospace series - Sleeving, heat-shrinkable, for binding, insulation and identification - Part 108: Limited fire hazard sleeving - Operating temperatures - 65 °C to 150 °C - Product standard
EN ISO 12958-2, Geotextiles and geotextile-related products - Determination of water flow capacity in their plane - Part 2: Performance test (ISO/DIS 12958-2:2019)
EN 7010, Aerospace series - Configuration master - Definition and designation of external threaded fastener product standards
EN 4708-107, Aerospace series - Sleeving, heat-shrinkable, for binding, insulation and identification - Part 107: Polytetrafluoroethylene (PTFE) - Operating temperatures - 65 °C to 260 °C - Product standard
EN 3155-077, Aerospace series - Electrical contacts used in elements of connection - Part 077: Contacts, electrical, female, type A, crimp, class R - Product standard
EN 3155-076, Aerospace series - Electrical contacts used in elements of connection - Part 076: Contacts, electrical, male, type A, crimp, class R - Product standard
EN 3745-404, Aerospace series - Fibres and cables, optical, aircraft use - Test methods - Part 404: Thermal shock
EN 3761, Aerospace series - Heat resisting alloy FE-PA2601 - Softened and cold worked - Bar for forged fasteners - D ≤ 50 mm - 1 100 MPa ≤ Rm ≤ 1 300 MPa
EN 3666, Aerospace series - Heat resisting alloy NI-PH2601 - Solution treated and cold worked - Bar for forged fasteners - D ≤ 50 mm - 1 550 MPa ≤ Rm ≤ 1 830 MPa
EN 2390, Aerospace series - Aluminium alloy 6082-T6 - Tubes for structures 0,6 mm ≤ a ≤ 12,5 mm
EN 2125, Aerospace series - Aluminium alloy Al-P16 - T6151 - Plates 6 mm < a &le; 120 mm
EN ISO 9863-1:2016/A1, Geosynthetics - Determination of thickness at specified pressures - Part 1: Single layers - Amendment 1 (ISO 9863-1:2016/DAM 1:2019)
EN 2886, Aerospace series - Screws, pan head, offset cruciform recess, close tolerance normal shank, short thread, in alloy steel, cadmium plated - Classification: 900 MPa (at ambient temperature)/235 °C
EN 2885, Aerospace series - Screws, pan head, offset cruciform recess, coarse tolerance normal shank, short thread, in alloy steel, cadmium plated - Classification : 900 MPa (at ambient temperature) / 235 °C
EN 2943, Aerospace series - Inserts, MJ and M screw threads, helical coil - Technical specification
EN ISO 21187, Milk - Quantitative determination of bacteriological quality - Guidance for establishing and verifying a conversion relationship between results of an alternative method and anchor method results (ISO/DIS 21187:2019)
EN ISO 16297, Milk - Bacterial count - Protocol for the evaluation of alternative methods (ISO/DIS 16297:2019)
EN 17371-3, Provision of services - Part 3: Management of Performance Measurement - Guidance on the mechanism to measure performance as part of service contracts
EN 17371-2, Provision of services - Part 2: Services Contracts - Guidance for the design and structure of contracts
EN 17371-1, Provision of services - Part 1: Service procurement - Guidance for the assessment of the capacity of service providers and evaluation of service proposals
EN 926-2:2013/A1, Paragliding equipment - Paragliders - Part 2: Requirements and test methods for classifying flight safety characteristics
EN 3740, Aerospace series - Bolts, shouldered, thin hexagonal head, close tolerance shank, short thread, in titanium alloy, anodized, MoS2 coated - Classification: 1 100 MPa (at ambient temperature)/315 °C
EN 3155-079, Aerospace series - Electrical contacts used in elements of connection - Part 079: Contacts size 22 for EN 2997, electrical, female, type A, crimp, class S - Product standard
EN 3155-083, Aerospace series - Electrical contacts used in elements of connection - Part 083: Contact, electrical, female, type A, crimp, class S, size 8 - Product standard
EN 3155-071, Aerospace series - Electrical contacts used in elements of connection - Part 071: Contacts, electrical, female, type A, crimp, class S - Product standard
EN 3155-070, Aerospace series - Electrical contacts used in elements of connection - Part 070: Contacts, electrical, male, type A, crimp, class S - Product standard
EN 3155-065, Aerospace series - Electrical contacts used in elements of connection - Part 065: Contacts, electrical, male, type A, crimp, class S, size 8 - Product standard
EN 4476, Aerospace series - Paints and varnishes - Cold curing intermediate coat
EN 3660-033, Aerospace series - Cable outlet accessories for circular and rectangular electrical and optical connectors - Part 033: Stainless steel banding band, style Z, for attachment of individual and/or overall screens to cable outlets - Product standard
EN 203-1, Gas heated catering equipment - Part 1: General safety requirements
EN 203-2-1, Gas heated catering equipment - Part 2-1: Specific requirements - Open burners and wok burners
EN 1502, Inland navigation vessels - Boarding stairs
EN 2465, Aerospace series - Steel X2CrNi18-9 (1.4307) - Softened - 450 MPa &le; Rm &le; 680 MPa - Bar for machining - 4 mm &le; De &le; 100 mm
EN 4868, Aerospace series - Anodic electrodeposition of hexavalent chromium free primer
EN 4612-004, Aerospace series - Cables, electrical, for general purpose, single and multicore assembly - XLETFE Family - Jacketed or screened and jacketed - Part 004: Tin plated copper - Operating temperatures, between - 65 °C and 135 °C - Single extruded wall for open applications, with jacket and screen (braid) - UV laser printable - Product standard
EN 4612-003, Aerospace series - Cables, electrical, for general purpose, single and multicore assembly - XLETFE Family - Jacketed or screened and jacketed - Part 003: Tin plated copper - Operating temperatures, between -65 °C and 135 °C - Single extruded wall for open applications, with jacket without screen - UV laser printable - Product standard
EN 4612-002, Aerospace series - Cables, electrical, for general purpose, single and multicore assembly - XLETFE Family - Jacketed or screened and jacketed - Part 002: General
EN 4612-012, Aerospace series - Cables, electrical, for general purpose, single and multicore assembly - XLETFE Family - Jacketed or screened and jacketed - Part 012: Nickel plated copper - Operating temperatures, between - 65 °C and 150 °C - Dual extruded wall for open applications, with jacket and screen (braid) - UV laser printable - Product standard
EN 4612-011, Aerospace series - Cables, electrical, for general purpose, single and multicore assembly XLETFE Family jacketed or screened and jacketed - Part 011: Nickel plated copper - Operating temperatures, between - 65 °C and 150 °C - Dual extruded wall for open applications, with jacket without screen - UV laser printable - Product standard
EN 4612-009, Aerospace series - Cables, electrical, for general purpose, single and multicore assembly - XLETFE Family - Jacketed or screened and jacketed - Part 009: Silver plated copper - Operating temperatures, between - 65 °C and 150 °C - Dual extruded wall for open applications, with jacket without screen - UV laser printable - Product standard
EN 4612-008, Aerospace series - Cables, electrical, for general purpose, single and multicore assembly - XLETFE Family - Jacketed or screened and jacketed - Part 008: Silver plated copper - Operating temperatures, between - 65 °C and 150 °C - Single extruded wall for open applications, with jacket and screen (braid) - UV laser printable - Product standard
EN 16803-2, Space - Use of GNSS-based positioning for road Intelligent Transport Systems (ITS) - Part 2: Assessment of basic performances of GNSS-based positioning terminals
EN 17361, Inland navigation vessels - Outboard ladders
EN 17360, Inland navigation vessels - Stanchions and holders for tiltable and detachable railings
EN 4056-003, Aerospace series - Cable ties for harnesses - Part 003: Plastic cable ties - Operating temperatures -65 °C to 105 °C and -65 °C to 150 °C - Product standard
EN 3837, Aerospace series - Paints and varnishes - Nature and methods for surface preparation of test pieces in aluminium alloys
EN 3844-3, Aerospace series - Flammability of non metallic materials - Part 3: Small burner test, 45° - Determination of the resistance of material to flame and glow propagation and to flame penetration
EN 3844-2, Aerospace series - Flammability of non metallic materials - Part 2: Small burner test, horizontal - Determination of the horizontal flame propagation
EN 3844-1, Aerospace series - Flammability of non metallic materials - Part 1: Small burner test, vertical - Determination of the vertical flame propagation
EN 4612-010, Aerospace series - Cables, electrical, for general purpose, single and multicore assembly - XLETFE Family - Jacketed or screened and jacketed - Part 010: Silver plated copper - Operating temperatures, between -65 °C and 150 °C - Dual extruded wall for open applications, with jacket and screen (braid) - UV laser printable - Product standard
EN 4612-006, Aerospace series - Cables, electrical, for general purpose, single and multicore assembly - XLETFE Family - Jacketed or screened and jacketed - Part 006: Tin plated copper - Operating temperatures, between -65 °C and 135 °C - Dual extruded wall for open applications, with jacket and screen (braid) - UV laser printable - Product standard
EN 4612-005, Aerospace series - Cables, electrical, for general purpose, single and multicore assembly XLETFE Family jacketed or screened and jacketed - Part 005: Tin plated copper - Operating temperatures, between - 65 °C and 135 °C - Dual extruded wall for open applications, with jacket without screen - UV laser printable - Product standard
EN 3155-008, Aerospace series - Electrical contacts used in elements of connection - Part 008: Contacts, electrical, male, type A, crimp, class S - Product standard
EN 13971, Carbonate and silicate liming materials - Determination of reactivity - Potentiometric titration method with hydrochloric acid
EN 16803-3, Space - Use of GNSS-based positioning for road Intelligent Transport Systems (ITS) - Part 3: Assessment of security performances of GNSS-based positioning terminals
EN 3645-001, Aerospace series - Connectors, electrical, circular, scoop-proof, triple start threaded coupling, operating temperature 175 °C or 200 °C continuous - Part 001: Technical specification
EN 4612-007, Aerospace series - Cables, electrical, for general purpose, single and multicore assembly - XLETFE Family - Jacketed or screened and jacketed - Part 007: Silver plated copper - Operating temperatures, between - 65 °C and 150 °C - Single extruded wall for open applications, with jacket without screen - UV laser printable - Product standard
EN 3155-027, Aerospace series - Electrical contacts used in elements of connection - Part 027: Contacts, electrical, female, type A, crimp, class R - Product standard
EN 3155-026, Aerospace series - Electrical contacts used in elements of connection - Part 026: Contacts, electrical, male, type A, crimp, class R - Product standard
EN 3155-009, Aerospace series - Electrical contacts used in elements of connection - Part 009: Contacts, electrical, female, type A, crimp, class S - Product standard
EN 4707, Aerospace series - Acid pickling of aluminium and aluminium alloys without hexavalent chromium
EN 3510, Aerospace series - Heat resisting alloy FE-PA2602 (X4NiCrTiMoV26-15) - Solution treated and precipitation treated - Bar and section - De &le; 100 mm
EN 3489, Aerospace series - Steel FE-PA13 - Softened - 500 &le; Rm &le; 750 MPa - Tubes for structures - 0,5 &le; a &le; 5 mm
EN 3486, Aerospace series - Steel FE-PM67 - Solution annealed and precipitation hardened - 1 400 &le; Rm &le; 1 550 MPa - Forgings - De &le; 100 mm
EN 3484, Aerospace series - Steel FE-CM61 - As cast - Reference heat treatment: homogenised, solution treated, precipitation hardened and sub zero - Remelting stock
EN 3155-003, Aerospace series - Electrical contacts used in elements of connection - Part 003: Contacts, electrical, female, type A, crimp, class S - Product standard
EN ISO 20957-2, Stationary training equipment - Part 2: Strength training equipment, additional specific safety requirements and test methods (ISO/DIS 20957-2:2019)
EN ISO 20957-7, Stationary training equipment - Part 7: Rowing equipment, additional specific safety requirements and test methods (ISO/DIS 20957-7:2019)
EN ISO 11495, Jewellery and precious metals - Determination of palladium in palladium alloys - ICP-OES method using an internal standard element (ISO/DIS 11495:2018)
EN ISO 11494, Jewellery and precious metals - Determination of platinum in platinum alloys - ICP-OES method using an internal standard element (ISO/DIS 11494:2018)
EN 16602-70-16, Space product assurance - Adhesive bonding for spacecraft and launcher applications
EN 3299, Aerospace series - Shaft-nuts and threaded rings, self-locking, right- or left-hand MJ threads, in heat resisting steel FE-PA2601 (A286), silver plated - Technical specification
EN 3685, Aerospace series - Bolts in heat resisting steel FE-PA2601 (A286) - Classification: 1 100 MPa/650 °C - Technical specification
EN 4161, Aerospace series - Screws, pan head, offset cruciform recess, coarse tolerance normal shank, long thread, in alloy steel, cadmium plated - Classification : 1 100 PMa (at ambient temperature) / 235 °C
EN 721, Leisure accommodation vehicles - Safety ventilation requirements
EN 3278, Aerospace series - Sleeves, tubular, protruding head, in corrosion resisting steel, passivated (0,25 mm wall thickness)
EN 3155-080, Aerospace series - Electrical contacts used in elements of connection - Part 080: Contacts size 22 for EN 2997, electrical, male, type A, crimp, class T - Product standard
EN 3363, Aerospace series - Steel FE-CM68 - Solution treated - Rm &ge; 485 MPa - Castings - Sand or investment casting
EN 4867, Aerospace series - Laser surface marking by discoloration
EN 13203-4, Gas-fired domestic appliances producing hot water - Part 4: Assessment of energy consumption of gas combined heat and power appliances (mCHP) producing hot water and electricity
EN 6049-004, Aerospace series - Electrical cables, installation - Protection sleeve in meta-aramid fibres - Part 004: Braided, tubular, high expandable - Product standard
EN 14901-1:2014/A1:2018, Ductile iron pipes, fittings and accessories - Requirements and test methods for organic coatings of ductile iron fittings and accessories - Part 1: Epoxy coating (heavy duty)
EN 1749, European standard for the classification of gas appliances according to the method of supplying combustion air and of evacuation of the combustion products (types)
EN ISO 11551, Optics and photonics - Lasers and laser-related equipment - Test method for absorptance of optical laser components (ISO/DIS 11551:2018)
EN 2451, Aerospace series - Steel FE-PL73 - 1230 MPa <or= Rm <or= 1420 MPa - Forgings - De <or= 40 mm
EN 16838, Refrigerated display scooping cabinets and pozzetto for gelato - Classification, requirements, performance and energy consumption testing
EN 2503, Aerospace series - Steel FE-PM66 - 930 MPa &le; Rm &le; 1 080 MPa - Forgings - De &le; 150 mm
EN 2502, Aerospace series - Steel FE-PM66 - 930 MPa &le; Rm &le; 1 080 MPa - Bars - De &le; 150 mm
EN 2476, Aerospace series - Steel FE-PL74 - 1 100 MPa &le; Rm &le; 1 300 MPa - Forgings - De &le; 100 mm
EN 3482, Aerospace series - Steel FE-PA13 - Annealed - Reference heat treatment: softened - Forging stock - De &le; 100 mm
EN 3481, Aerospace series - Steel FE-PA13 - Annealed - Reference heat treatment: Softened - Hollow bars - 5 <or= A <or= 12 mm
EN 4608-001, Aerospace series - Cable, electrical, fire resistant - Single and twisted multicore assembly, screened (braided) and jacketed - Operating temperatures between - 65 °C and 260 °C - Part 001: Technical specification
EN 4708-105, Aerospace series - Sleeving, heat-shrinkable, for binding, insulation and identification - Part 105: Semi-flexible polyvinylidene fluoride (PDVF) - Temperature range -55 ºC and 150 ºC - Product Standard
EN 3018, Aerospace series - Heat resisting alloy NI-PH2801 (NiCr16Fe7Ti3Nb1Al1) - Consumable electrode remelted - Cold drawn wire for the manufacture of thead inserts - D &le; 3 mm
EN 3358, Aerospace series - Steel FE-PM1503 (X3CrNiMoAl 13-8-2) - Vacuum induction melted and consumable electrode remelted - Solution treated and precipitation treated - Bar for machining - a or D &le; 150 mm - Rm &ge; 1 400 MPa
EN 3219, Aerospace series - Heat resisting nickel base alloy (Ni-P100HT) - Cold worked and softened - Bar and wire for continuous forging or extrusion for fasteners - 3 mm &le; D &le; 30 mm
EN 3371, Aerospace series - Electrical bonding - Technical specification
EN 16087-1, Soil improvers and growing media - Determination of the aerobic biological activity - Part 1: Oxygen uptake rate (OUR)
EN 6101, Aerospace series - Rivet, 100° medium flush head, close tolerance - Inch series
EN 6069, Aerospace series - Rivet, 100° reduced flush head, close tolerance - Inch series
EN 6081, Aerospace series - Rivet, universal head, close tolerance - Inch series
EN 6080, Aerospace series - Rivet, 100° normal flush head, close tolerance - Inch series
EN 3468, Steel FE-PA13 - Softened - 500 <or= RM <or= 700 MPa - Forgings - DE <or= 100 mm
EN 16604-10, Space sustainability - Space debris mitigation requirements (ISO 24113:2011, modified)
EN 6059-305, Aerospace series - Electrical cables, installation - Protection sleeves - Test methods - Part 305: Fluid absorption
EN 3155-078, Aerospace series - Electrical contacts used in elements of connection - Part 078: Contacts size 22 for EN 2997, electrical, male, type A, crimp, class S - Product standard
EN 3475-418, Aerospace series - Cables, electrical, aircraft use - Test methods - Part 418: Thermal endurance for conductors
EN 2957, Aerospace series - Method of preparation of forged samples
EN 14901-2, Ductile iron pipes, fittings and accessories - Requirements and test methods for organic coatings of ductile iron fittings and accessories - Part 2: Thermoplastic acid modified polyolefin coating (EN14901-2)
EN 4840-002, Aerospace series - Heat shrinkable moulded shapes - Part 002: Index of product standards and product dimensions
EN 2816, Aerospace series - Steel FE-PM1802 (X5CrNiCu15-5) - Consumable electrode remelted - Solution treated and precipitation treated - Forgings - a or D &le; 200 mm - Rm &ge; 965 MPa
EN 9138, Aerospace Series - Quality Management Systems - Statistical Product - Acceptance Requirements
EN 14103, Fat and oil derivatives - Fatty Acid Methyl Esters (FAME) - Determination of ester and linolenic acid methyl ester contents
EN 9147, Aerospace series - Management of unsalvageable Items
EN 4539-2, Aerospace series - Bearings, spherical plain, in corrosion resisting steel with self-lubricating liner - Elevated load under low oscillations -Wide series - Dimensions and loads - Inch series
EN 3155-082, Aerospace series - Electrical contacts used in elements of connection - Part 082: Contacts, electrical, female, type A, crimp, class S - Product standard
EN 3155-015, Aerospace series - Electrical contacts used in elements of connection - Part 015: Contacts, electrical, female, type A, crimp, class S - Product standard
EN 3645-013, Aerospace series - Connectors, electrical, circular, scoop-proof, triple start threaded coupling, operating temperature 175 °C or 200 °C continuous - Part 013: Dummy receptacle - Product standard
EN 3645-005, Aerospace series - Connectors, electrical, circular, scoop-proof, triple start threaded coupling, operating temperature 175 °C or 200 °C continuous - Part 005: Receptacle, hermetic, round flange, solder mounting - Product standard
EN 3155-014, Aerospace series - Electrical contacts used in elements of connection - Part 014: Contacts, electrical, male, type A, crimp, class S - Product standard
EN 4660-005, Aerospace series - Modular and Open Avionics Architectures - Part 005: Software
EN 4660-004, Aerospace series - Modular and open avionics architectures - Part 004: Packaging
EN 16603-11, Space engineering - Definition of the Technology Readiness Levels (TRLs) and their criteria of assessment (ISO 16290:2013, modified)
EN ISO 17059, Oilseeds - Extraction of oil and preparation of methyl esters of triglyceride fatty acids for analysis by gas chromatography (Rapid method) (ISO/FDIS 17059:2019)
EN 17035, Surface Active Agents - Bio-based surfactants - Requirements and test methods
EN 12975, Solar collectors - General requirements
EN 16905-2, Gas-fired endothermic engine driven heat pumps - Part 2: Safety
EN 4854-3, Aerospace series - Bearing, spherical plain, in corrosion resisting steel with self-lubricating liner, low starting torque and low friction coefficient, elevated duty cycles under low oscillations at different operating conditions - Part 3: Technical specification
EN 4854-2, Aerospace series - Bearing, spherical plain, in corrosion resisting steel with self-lubricating liner, low starting torque and low friction coefficient, elevated duty cycles under low oscillations at different operating conditions, wide series - Part 2: Dimensions and loads
EN 4854-1, Aerospace series - Bearing, spherical plain, in corrosion resisting steel with self-lubricating liner, low starting torque and low friction coefficient, elevated duty cycles under low oscillations at different operating conditions, narrow series - Part 1: Dimensions and loads
EN 4660-003, Aerospace series - Modular and Open Avionics Architectures - Part 003: Communications/Network
EN 16129, Pressure regulators, automatic change-over devices, having a maximum regulated pressure of 4 bar, with a maximum capacity of 150 kg/h, associated safety devices and adaptors for butane, propane, and their mixtures
EN 16602-20, Space product assurance - Quality assurance
EN 16603-50-11, Space engineernig - SpaceFibre - Very high-speed serial link
EN 2349-001, Aerospace series - Requirements and test procedures for switching devices
EN ISO 6218, Inland navigation vessels - Manually- and power-operated coupling devices for rope connections of pushing units and coupled vessels - Safety requirements and main dimensions (ISO/FDIS 6218:2019)
EN 1753, Magnesium and magnesium alloys - Magnesium alloy ingots and castings
EN 16602-70-17, Space product assurance - Durability testing of coatings and surface finishes
EN 16604-20, Space sustainability - Planetary protection
EN 16602-70-15, Space product assurance - Non-destructive inspection
EN 16602-10-09, Space product assurance - Nonconformance control system
EN 16495, Air Traffic Management - Information security for organisations supporting civil aviation operations
EN 9131, Aerospace series - Quality Management Systems - Nonconformance Data Definition and Documentation
EN 2667-03, Aerospace series - Non-metallic materials - Foaming structural adhesive films - Test methods - Part 3 : Expansion ratio and volatile content
EN 3645-010, Aerospace series - Connectors, electrical, circular, scoop-proof, triple start threaded coupling, operating temperature 175 °C or 200 °C continuous - Part 010: Receptacle, hermetic, round flange, jam nut mounting - Product standard
EN 17267, Energy measurement and monitoring plan for organisations - design and implementation
EN 613, Independent closed-fronted gas-fired type B11, type C11, type C31 and type C91 heaters
EN 4706, Aerospace series - LED colour and brightness ranking
EN 4681-006, Aerospace series - Cables, electric, general purpose, with conductors in aluminium or copper-clad aluminium - Part 006: AZA family, single and multicore assembly, for use in low pressure atmosphere - Product standard
EN 4681-005, Aerospace series - Cables, electric, general purpose, with conductors in aluminium or copper-clad aluminium - Part 005: AZ family, single, for use in low pressure atmosphere - Product standard
EN 6059-407, Aerospace series - Electrical cables, installation - Protection sleeves - Test methods - Part 407: Mark adherence and print permanence
EN ISO 22041, Refrigerated storage cabinets and counters for professional use - Performance and energy consumption (ISO/FDIS 22041:2019)
EN 4708-001, Aerospace series - Sleeving, heat-shrinkable, for binding, insulation and identification - Part 001: Technical specification
EN 3357, Aerospace series - Steel FE-PM1503 (X3CrNiMoAl 13-8-2) - Vacuum induction melted and consumable electrode remelted - Solution treated and precipitation treated - Bar for machining - a or D &le; 150 mm - 1 200 MPa &le; Rm &le; 1 400 MPa
EN 2002-16, Aerospace series - Metallic materials - Test methods - Part 16: Non-destructive testing - Penetrant testing
EN 2400, Aerospace series - Heat resisting nickel base alloy Ni-P96-HT - Cold drawn and precipitation treated - Wires D &le; 10 mm
EN 2002-21, Aerospace series - Metallic materials - Test methods - Part 21: Radiographic testing of castings
EN 17246, Fertilizers - Determination of perchlorate in mineral fertilizers by ion chromatography and conductivity detection (IC-CD)
EN 13878, Leisure accommodation vehicles - Terms and definitions
EN 15869-2, Inland navigation vessels - Electrical shore connection, three phase current 400 V, 50 Hz, up to 125 A - Part 2: On-shore unit, additional requirements
EN 15869-1, Inland navigation vessels - Electrical shore connection, three phase current 400 V, 50 Hz, up to 125 A - Part 1: General requirements
EN 15869-3, Inland navigation vessels - Electrical shore connection, three phase current 400 V, 50 Hz, up to 125 A - Part 3: On-board unit, additional requirements
EN ISO 9902-6, Textile machinery - Noise test code - Part 6: Fabric manufacturing machinery (ISO/DIS 9902-6:2018)
EN 3660-001, Aerospace series - Cable outlet accessories for circular and rectangular electrical and optical connectors - Part 001: Technical specification
EN 17175, Gas-fired overhead radiant strip heaters and multi-burner continuous radiant tube heater systems for non-domestic use - Safety and energy efficiency
EN 4533-001, Aerospace series - Fibre optic systems - Handbook - Part 001: Termination methods and tools
EN ISO 9167, Rapeseed and rapeseed meals - etermination of glucosinolates content - Method using high-performance liquid chromatography (ISO/FDIS 9167:2019)
EN 419, Gas-fired overhead luminous radiant heaters for non-domestic use - Safety and energy efficiency
EN ISO 20504, Fine ceramics (advanced ceramics, advanced technical ceramics) - Mechanical properties of ceramic composites at room temperature - Determination of compressive properties (ISO/FDIS 20504:2019)
EN ISO 17678, Milk and milk products - Determination of milk fat purity by gas chromatographic analysis of triglycerides (Reference method) (ISO/DIS 17678:2017)
EN ISO 19901-7, Petroleum and natural gas industries - Specific requirements for offshore structures - Part 7: Stationkeeping systems for floating offshore structures and mobile offshore units (ISO/DIS 19901-7:2017)
EN 598, Coated and lined ductile iron pipes, fittings and their joints for sewerage and drainage applications - Products characteristics and test and assessment methods
EN 416, Gas-fired overhead radiant tube heaters and radiant tube heater systems for non-domestic use - Safety and energy efficiency
EN ISO 14880-1, Optics and photonics - Microlens arrays - Part 1: Vocabulary (ISO/FDIS 14880-1:2019)
EN 30-1-1, Domestic cooking appliances burning gas - Part 1-1: Safety - General
EN 2812, Aerospace series - Stripping of electric cables
EN 4165-022, Aerospace series - Connectors, electrical, rectangular, modular - Operating temperature 175 °C continuous - Part 022: Insertion/extraction tool for removal of modules - Product standard
EN 16602-70-60, Space product assurance - Qualification and Procurement of printed circuit boards
EN 17169, Tattooing - Safe and hygienic practice
EN 4838-005, Aerospace series - Arc fault circuit breakers, single-pole, temperature compensated, rated current 3 A to 25 A - 115 V a.c. 400 Hz Constant Frequency - Part 005: With polarized signal contact - Product standard
EN 88-3, Safety and control devices for gas burners and gas burning appliances - Part 3: Pressure and/or flow rate regulators for inlet pressures up to and including 500 kPa, electronic types
EN 30-2-2, Domestic cooking appliances burning gas - Part 2-2: Rational use of energy - Appliances having forced-convection ovens and/or grills
EN 2797, Aerospace series - Fluorocarbon rubber (FKM) - Low compressions set - Hardness 70 IRHD
EN ISO 22291, Safety requirements for wetlaid-nonwoven machinery (ISO/FDIS 22291:2019)
EN 12973, Value Management
EN 17128, Light motorized vehicles for the transportation of persons and goods and related facilities and not subject to type-approval for on-road use - Personal light electric vehicles (PLEV) - Safety requirements and test methods
ISO/TS 17969, Petroleum, petrochemical and natural gas industries - Guidelines on competency for personnel
EN 203-2-1:2014/A1, Gas heated catering equipment - Part 2-1: Specific requirements - Open burners and wok burners
EN 17323, Geosynthetics - Polymeric geosynthetic barriers - Determination of tensile properties
EN 15381, Geotextiles and geotextile-related products - Characteristics required for use in pavements and asphalt overlays
EN 15017, Funeral Services - Requirements
EN 6040, Aerospace series - Non-metallic materials - Test method - Analysis of thermoset systems by High Performance Liquid Chromatography (HPLC)
EN 2132, Aerospace series - Electrodeposition of Chromium for Engineering Purposes
EN 17082, Domestic and non-domestic gas-fired forced convection air heaters for space heating not exceeding a net heat input of 300 kW
EN 2366, Aerospace series - Sheets and strips - Heat resisting alloys - Cold rolled - Thickness a &le; 3 mm - Dimensions
EN 14195:2014/A1, Metal framing components for gypsum board systems - Definitions, requirements and test methods
EN 14150, Geosynthetic barriers - Determination of permeability to liquids
EN ISO 11553-2, Safety of machinery - Laser processing machines - Part 2: Safety requirements for hand-held laser processing devices (ISO/DIS 11553-2:2016)
EN ISO 11553-1, Safety of machinery - Laser processing machines - Part 1: General safety requirements (ISO/DIS 11553-1:2016)
EN 17066-1, Insulated means of transport for temperature sensitive goods - Requirements and testing - Part 1: Container
EN 13454-1, Binders for floor screeds based on calcium sulphate - Part 1: Definitions and requirements
EN 13658-2, Metal lath and beads - Definitions, requirements and test methods - Part 2: External rendering
EN 13658-1, Metal lath and beads - Definitions, requirements and test methods - Part 1: Internal plastering
EN 13279-1, Gypsum binders and gypsum plasters - Part 1: Definitions and requirements
EN 17097, Geosynthetics - Characteristics required for use in surface erosion control on slopes and banks
EN ISO 24576, Geosynthetic - Test method for determining the resistance of polymeric geosynthetic barriers to environmental stress cracking (ISO/DIS 24576:2017)
EN ISO 12960, Geotextiles and geotextile-related products - Screening test method for determining the resistance to acid and alkaline liquids (ISO/DIS 12960:2018)
EN ISO 13437, Geosynthetics - Installing and retrieving samples in the field for durability assessment (ISO/FDIS 13437:2019)
ISO 13426-1, Geotextiles and geotextiles-related products - Strength of internal structural junctions - Part 1: Geocells
EN ISO 12956, Geotextiles and geotextile-related products - Determination of the characteristic opening size (ISO/DIS 12956:2018)
EN ISO 11058, Geotextiles and geotextile-related products - Determination of water permeability characteristics normal to the plane, without load (ISO/FDIS 11058:2019)
EN ISO 10722, Geosynthetics - Index test procedure for the evaluation of mechanical damage under repeated loading - Damage caused by granular material (Laboratory test method) (ISO/DIS 10722:2018)
EN ISO 13426-1, Geotextiles and geotextile-related products - Strength of internal structural junctions - Part 1: Geocells
ISO 13437, Geotextiles and geotextile-related products - Method for installing and extracting samples in soil, and testing specimens in laboratory
EN ISO 34101-2, Sustainable and traceable cocoa - Part 2: Requirements for performance (related to economic, social, and environmental aspects) (ISO 34101-2:2018)
EN ISO 34101-1, Sustainable and traceable cocoa - Part 1: Requirements for cocoa sustainability management systems (ISO 34101-1:2018)
EN ISO 18796-1, Petroleum, petrochemical and natural gas industries — Internal coating and lining of process vessels — Part 1: Technical requirements
EN ISO 19345-2, Petroleum and natural gas industry — Pipeline integrity management specification — Part 2: Full-life cycle integrity management for offshore pipeline
N0095, Draft decision CEN/TC 413 C42/2016 Activation of a new work item (WI 00413009)
EN 16990, Non-type approved light motorized vehicles for the transportation of persons and goods and related facilities - All Terrain Vehicles (ATVs - Quads) and Side by Side Vehicles - Safety requirements and test methods
EN 26:2015/A1:2016, Gas-fired instantaneous water heaters for the production of domestic hot water
EN 89:2015/A1:2016, Gas-fired storage water heaters for the production of domestic hot water
EN 203-2-7, Gas heated catering equipment - Part 2-7: Specific requirements - Salamanders and rotisseries
EN 14382, Gas safety shut-off devices for inlet pressure up to 100 bar
EN 334, Gas pressure regulators for inlet pressure up to 10 MPa (100 bar)
ISO 19345-2, PNGI - Pipeline integrity management specification - Part 2: Full-life cycle integrity managemen for offshore pipeline
EN 1612, Plastics and rubber machines - Reaction moulding machines and plants - Safety requirements
EN 12301, Plastics and rubber machines - Calenders - Safety requirements
EN 3572, Aerospace series - PTFE flexible hose assembly with convoluted inner tube of a nominal pressure up to 6 800 kPa and 8°30' fitting in titanium - Product standard
EN ISO 17666, Space systems - Risk management (ISO/DIS 17666:2015)
EN 1114-3, Plastics and rubber machines - Extruders and extrusion lines - Part 3: Safety requirements for haul-offs
EN 12067-2, Safety and control devices for burners and appliances burning gaseous or liquid fuels - Control functions in electronic systems - Part 2: Fuel/air ratio control / supervision of the electronic type
EN ISO 10418, Petroleum and natural gas industries - Offshore production installations - Process safety systems (ISO/FDIS 10418:2019)
EN 16898, Safety and control devices for gas burners and gas burning appliances - Gas filters having a maximum working pressure up to and including 600 kPa
EN 15477, Fertilizers - Determination of the water-soluble potassium content
EN 9130, Aerospace series - Quality systems - Record retention
EN 16808, Petroleum, petrochemical and natural gas industries - Safety of machineries - Manual elevators
EN 126:2012/A1, Multifunctional controls for gas burning appliances
EN 88-2, Safety and control devices for gas burners and gas burning appliances - Part 2: Pressure regulators for inlet pressure above 50 kPa up to and including 500 kPa and associated safety devices
EN 14566, Mechanical fasteners for gypsum board systems - Definitions, requirements and test methods
EN ISO 18623-1, Air compressors and compressed air systems - Air compressors - Part 1: Safety requirements (ISO/DIS 18623-1:2016)
EN 203-2-8, Gas heated catering equipment - Part 2-8: Specific requirements - Brat pans and paëlla cookers
EN 16603-20-01, Space engineering - Multipaction, design and test
EN 3471, Aerospace series - Steel FE-PA18 - Quenched and cold drawn - Strip for spring - a &le; 4,0 mm
EN 16720-2, Characterization of sludges - Physical consistency - Part 2: Determination of solidity - Method by pocket vane shear apparatus
EN ISO 23537, Requirements for sleeping bags (ISO/DIS 23537:2013)
EN 4666, Aerospace series - Aircraft integrated air quality and pressure standards, criteria and determination methods
EN 16440-2, Testing methodologies for cooling equipment for insulated means of transportation - Part 2: Eutectic systems
EN 676, Forced draught burners for gaseous fuels
EN 877, Cast iron pipes systems for the evacuation of water from works - Characteristics and test methods
EN ISO 13628-6, Petroleum and natural gas industries - Design and operation of subsea production systems - Part 6: Subsea production control systems (ISO/DIS 13628-6:2012)
EN ISO 28300, Petroleum, petrochemical and natural gas industries - Venting of atmospheric and low-pressure storage tanks (ISO/DIS 28300:2011)
EN 9116, Aerospace Series - Notice of Change (NOC) Requirements
EN 12975-1, Thermal solar systems and components - Solar collectors - Part 1: General requirements
EN 15266:2007/FprA1:2011, Stainless steel pliable corrugated tubing kits in buildings for gas with an operating pressure up to 0,5 bar
EN 50465:2011, Gas appliances - Combined heat and power appliance of nominal heat input inferior or equal to 70 kW
EN 161:2011/A1, Automatic shut-off valves for gas burners and gas appliances - Special requirements to determine performance level (PL)
EN 442-3:2010/REVIEW, Radiators and convectors - Part 3: Evaluation of conformity
EN 442-2:2010/REVIEW, Radiators and convectors - Part 2: Test methods and rating
EN 442-1:2010/REVIEW, Radiators and convectors - Part 1: Technical specifications and requirements
EN ISO 13710, Petroleum, petrochemical and natural gas industries - Reciprocating positive displacement pumps (ISO/DIS 13710:2010)
EN ISO 13628-8, Petroleum and natural gas industries - Design and operation of subsea production systems - Part 8: Remotely operated tools and interfaces on subsea production systems (ISO/DIS 13628-8:2010)
EN 16154, Air Traffic Management - Software assurance levels
EN ISO 21049, Pumps - Shaft-sealing systems for centrifugal and rotary pumps (ISO/DIS 21049:2010)
EN ISO 10426-2, Petroleum and natural gas industries - Cements and materials for well cementing - Part 2: Testing of well cements (ISO/DIS 10426-2:2010)
EN ISO 13628-17, Petroleum and natural gas industries - Design and operation of subsea production systems - Part 17: Guidelines for flexible pipe ancillary equipment (ISO/DIS 13628-17:2010)
EN ISO 13628-16, Petroleum and natural gas industries - Design and operation of subsea production systems - Part 16: Specification for flexible pipe ancillary equipment (ISO/DIS 13628-16:2010)
EN 30-1-1:2008/FprA1, Domestic cooking appliances burning gas - Part 1-1: Safety - General
EN ISO 10437, Petroleum, petrochemical and natural gas industries - Steam turbines - Special-purpose applications (ISO/DIS 10437:2009)
EN ISO 20451:2008, Milk and milk products - Determination of nitrate content - Method by enzymatic reduction and molecular-absorption spectrometry after Griess reaction (ISO/FDIS 20451:2008)
EN ISO 13535, Petroleum and natural gas industries - Drilling and production equipment - Hoisting equipment (ISO/DIS 13535:2008)
EN ISO 13534:2008, Petroleum and natural gas industries - Drilling and production equipment - Inspection, maintenance, repair and remanufacture of hoisting equipment (ISO/DIS 13534:2008)
EN ISO 10428:2007, Petroleum and natural gas industries downhole equipment - Downhole equipment - Sucker rods, couplings and ancillary equipment (ISO/DIS 10428:2007)
EN ISO 13628-1:2005/prA2:2008, Petroleum and natural gas industries - Design and operation of subsea production systems - Part 1: General requirements and recommendations - Amendment 2: Revised Annex L (ISO 13628-1:2005/DAM 2:2008)
EN ISO 8799:1988/prA1:2007, Surface active agents - Sulfated ethoxylated aicohols and alkylphenols - Determination of content of unsulfated matter - Amendment 1 (ISO 8799:1995/DAM 1:2007)
EN ISO 10431:2006, Petroleum och natural gas industries - Pumping units - Specification (ISO/DIS 10431:2006)
EN 14879-6:2006, Organic coating systems and linings for protection of industrial apparatus and plants against corrosion caused by aggressive media - Part 6: Combined linings with tile and brick layers
EN 15502-1:2006, Gas-fired central heating boilers - Part 1: General requirements and tests
EN 15474, Minimum requirements for manufactured and compatible cartridges to safeguard proper interaction with inkjet printer systems
EN 15462-1, Minimum requirements for remanufactured and compatible user replaceable cartridges to safeguard proper interaction with electro photographic printer systems or multi-functional devices that may contain printer components - Part 1: Monochrome
EN 2591-6403, Aerospace series - Elements of electrical and optical connection - Test methods - Part 6403: Optical elements - Vibrations
EN ISO 2591-6321, Aerospace series - Elements of electrical and optical connection - Test methods - Part 6321: Optical elements - Damp heat, cyclic test
EN ISO 15098, Dentistry - Dental tweezers (ISO/DIS 15098:2019)
EN 15070, Strip wound flexible safety metallic hose assemblies for the connection of domestic appliances using gaseous fuels
EN 15084, Liming materials - Determination of the lime requirement - Guidelines, principles and parameters
EN 676:2003/A1:2004, Automatic forced draught burners for gaseous fuels
Show more Show less
Published 717 standards