This document specifies the characteristics of valves made from unplasticized polyamide (PA-U) in

accordance with ISO 16486-1, intended to be buried and used for the supply of gaseous fuels.

NOTE 1 For the purpose of this document the term gaseous fuels include for example natural gas, methane, butane,

propane, hydrogen, manufactured gas, biogas, and mixtures of these gases. Additional information about the suitability

for 100 % hydrogen and its admixtures with natural gas is given by ISO 16486-1:2023, Annex C and Annex D.

It is applicable to isolating unidirectional and bi-directional valves with spigot ends or electrofusion

sockets intended to be fused with PA-U pipes conforming to ISO 16486-2 and PA-U fittings conforming to

ISO 16486-3.

This document also specifies the test parameters for the test methods it describes.

In conjunction with ISO 16486-1, ISO 16486-2, ISO 16486-3 and ISO 16486-5, this document is applicable to

PA-U valves and their joints and to joints with components of PA-U and other materials intended to be used

under the following conditions:

a) a maximum operating pressure (MOP) of up to and including 18 bar1), or limited to 16 bar under regional

CEN requirements, at a reference temperature of 20 °C for design purposes;

NOTE 2 For the purpose of this document and the references to ISO 8233, MOP is considered to be nominal

pressure.

b) an operating temperature of −20 °C to 40 °C;

NOTE 3 For operating temperatures between 20 °C and 40 °C, derating coefficients are specified in ISO 16486-5.

This document covers valves for pipes with a nominal outside diameter, dn, ≤400 mm.