378 träffar på

Standard · ISO standard ISO/TS 17165-2:2013

Hydraulic fluid power -- Hose assemblies -- Part 2: Practices for hydraulic hose assemblies

ISO/TS 17165-2:2013 provides guidelines for selection, routing, fabrication, installation, replacement, maintenance and storage of hose and hose assemblies for hydraulic fluid power systems which a...

Språk

Publicerad

2013-04-19

PDF · 784 SEK
Standard · Svensk standard SS-ISO 18752:2012

Slang och slangledningar av gummi - Ståltrådsarmerade och textilarmerade hydraulslangar med ett arbetstryck per serie - Krav (ISO 18752:2012, IDT)

This International Standard specifies requirements for ten classes, four grades and seven types of wire- or textile-reinforced hydraulic hoses and hose assemblies of nominal sizes ranging from 5 to...

Språk

Publicerad

2012-11-22

PDF · 645 SEK
Standard · Svensk standard SS-EN ISO 10380:2012

Rörledningar - Korrugerad metallslang med anslutningar (ISO 10380:2012)

ISO 10380:2012 specifies the minimum requirements for the design, manufacture, testing and installation of corrugated metal hose and metal hose assemblies.

Språk

Publicerad

2012-11-12

PDF · 975 SEK
Standard · ISO standard ISO 18752:2012

Rubber hoses and hose assemblies -- Wire- or textile-reinforced single-pressure types for hydraulic applications -- Specification

-

Språk

Publicerad

2012-11-08

PDF · 733 SEK
Standard · ISO standard ISO 10380:2012

Pipework -- Corrugated metal hoses and hose assemblies

ISO 10380:2012 specifies the minimum requirements for the design, manufacture, testing and installation of corrugated metal hose and metal hose assemblies.

Språk

Publicerad

2012-10-19

PDF · 1.193 SEK
Standard · Svensk standard SS-EN 26801/A1:2011

Slangar av gummi eller plast - Bestämning av volymutvidgning - Tillägg 1: Borttagning av alkohol som trycksättningsvätska (ISO 6801:1983/Amd 1:2011)

-

Språk

Publicerad

2012-01-11

PDF · 375 SEK
Standard · Svensk standard SS-EN ISO 10619-1:2011

Slang och rör av gummi och plast - Mätning av flexibilitet och styvhet - Del 1: Böjprovning i rumstemperatur (ISO 10619-1:2011)

ISO 10619-1:2011 specifies three methods for measuring the flexibility of rubber and plastics hoses and tubing (methods A1, B and C1), where the deformation of the hose or tubing is measured, and t...

Språk

Publicerad

2011-12-16

PDF · 745 SEK
Standard · Svensk standard SS-EN ISO 10619-2:2011

Slang och rör av gummi och plast - Mätning av flexibilitet och styvhet - Del 2: Böjprovning vid låg temperatur (ISO 10619-2:2011)

ISO 10619-2:2011 specifies two methods for measuring the stiffness and one method for the determination of the flexibility of rubber and plastics hoses and tubing when they are bent to a specific r...

Språk

Publicerad

2011-12-16

PDF · 645 SEK
Standard · Svensk standard SS-EN ISO 10619-3:2011

Slang och rör av gummi och plast - Mätning av flexibilitet och styvhet - Del 3: Böjprovning vid hög och låg temperatur (ISO 10619-3:2011)

ISO 10619-3:2011 specifies a method for the determination of the bending characteristics of rubber and plastics hoses and tubing, including the force required for bending, over a range of temperatu...

Språk

Publicerad

2011-12-16

PDF · 545 SEK
Standard · ISO standard ISO 10619-1:2011

Rubber and plastics hoses and tubing -- Measurement of flexibility and stiffness -- Part 1: Bending tests at ambient temperature

-

Språk

Publicerad

2011-11-30

PDF · 676 SEK
Standard · ISO standard ISO 10619-2:2011

Rubber and plastics hoses and tubing -- Measurement of flexibility and stiffness -- Part 2: Bending tests at sub-ambient temperatures

-

Språk

Publicerad

2011-11-30

PDF · 603 SEK
Standard · ISO standard ISO 10619-3:2011

Rubber and plastics hoses and tubing -- Measurement of flexibility and stiffness -- Part 3: Bending tests at high and low temperatures

-

Språk

Publicerad

2011-11-30

PDF · 402 SEK
Standard · Svensk standard SS-EN ISO 6224:2011

Slang av termoplast - Textilarmerad vattenslang för allmänna ändamål - Specifikation (ISO 6224:2011)

This International Standard specifes the requirements for general-purpose textile-reinforced thermoplastics water-discharge hoses.Three types of hose are specifed according to their operating duty ...

Språk

Publicerad

2011-11-16

PDF · 545 SEK
Standard · Svensk standard SS-EN ISO 30013:2011

Slang av gummi och termoplast - Metoder för exponering i artificiellt ljus - Bestämning av ändringar i färg, utseende och andra fysikaliska egenska...

This International Standard specifies methods for the exposure of rubber and plastics hoses to three types of laboratory light source (xenon-arc, fluorescent UV and open-flame carbon-arc lamps). Th...

Språk

Publicerad

2011-11-16

PDF · 855 SEK
Standard · ISO standard ISO 6224:2011

Thermoplastics hoses, textile-reinforced, for general-purpose water applications -- Specification

-

Språk

Publicerad

2011-10-26

PDF · 529 SEK
Standard · ISO standard ISO 30013:2011

Rubber and plastics hoses -- Methods of exposure to laboratory light sources -- Determination of changes in colour, appearance and other physical p...

-

Språk

Publicerad

2011-10-14

PDF · 920 SEK
Standard · Svensk standard SS-EN ISO 4671:2007/A1:2011

Slang och slangledningar av gummi och plast - Metoder för mätning av dimensioner på slangar och längder på slangledningar - Tillägg 1: Klarläggande...

-

Språk

Publicerad

2011-10-12

PDF · 375 SEK
Standard · Svensk standard SS-EN 13618:2011

Vattenförsörjning - Flexibla anslutningsslangar för dricksvatten - Funktionella krav och provningsmetoder

This European Standard specifies the requirements and test methods for materials, dimensions and function for flexible hose assemblies, braided or not, designed for use with drinking water with an ...

Språk

Publicerad

2011-10-12

PDF · 855 SEK
Standard · Svensk standard SS-EN 15889:2011

Brand och räddning - Brandslangar - Testmetoder

This European standard specifies test methods for lay-flat fire-fighting hoses for fixed systems, semi-rigid fire-fighting hoses for both fixed systems and vehicles and fire-fighting suction hoses ...

Språk

Publicerad

2011-08-31

PDF · 1.095 SEK
Standard · ISO standard ISO 4671:2007/Amd 1:2011

Clarification of position at which outside diameter is measured

-

Språk

Publicerad

2011-08-31

PDF · 315 SEK
Standard · ISO standard ISO 6801:1983/Amd 1:2011

Deletion of alcohol as pressurizing fluid

-

Språk

Publicerad

2011-08-31

PDF · 315 SEK
Standard · Svensk standard SS-EN ISO 4641:2011

Rubber hoses and hose assemblies for water suction and discharge - Specification (ISO 4641:2010)

This International Standard specifies the minimum requirements for textile-reinforced, smooth-bore rubber water-suction and discharge hoses and hose assemblies. Three types of hoses and hose assemb...

Språk

Publicerad

2011-07-06

PDF · 645 SEK
Standard · Svensk standard SS-EN ISO 7751/A1:2011

Rubber and plastics hoses and hose assemblies - Ratios of proof and burst pressure to maximum working pressure - Amendment 1 - Replacement of "desi...

-

Språk

Publicerad

2011-06-15

PDF · 375 SEK
Standard · Svensk standard SS-EN ISO 3994:2011

Plastslang - Slang av termoplast med spiralformad termoplastarmering för sugning och tömning av vattenbaserat material - Specifikation (ISO 3994:2007)

This International Standard specifies the requirements for three types of helical-thermoplastic-reinforced thermoplastics hoses for suction and discharge of water, weak aqueous chemical solutions a...

Språk

Publicerad

2011-06-01

PDF · 745 SEK
Standard · Svensk standard SS-EN ISO 8331:2011

Rubber and plastics hoses and hose assemblies - Guidelines for selection, storage, use and maintenance (ISO 8331:2007)

This International Standard sets out recommendations designed to maintain rubber and plastics hoses andhose assemblies, prior to use, in a condition as close as possible to the condition they were ...

Språk

Publicerad

2011-06-01

PDF · 745 SEK
Standard · ISO standard ISO 7751:1991/Amd 1:2011

Replacement of "design working pressure" by "maximum working pressure" throughout text

-

Språk

Publicerad

2011-05-20

PDF · 315 SEK
Standard · Svensk standard SS-EN 1113:2008+A1:2011

Sanitetsarmaturer - Duschslang för vattenförsörjningssystem typ 1 och typ 2 - Allmänna tekniska specifikationer

This European Standard specifies: - the dimensional, leaktightness, mechanical and hydraulic characteristics with which shower hoses shall comply; - the procedures for testing these characteristics...

Språk

Publicerad

2011-03-30

PDF · 745 SEK
Standard · Svensk standard SS-EN 12115:2011

Slang och slangledningar av gummi och termoplast för transport av kemikalier i vätske- och gasform - Specifikation

This European Standard specifies requirements for two types of hose assemblies (Types D and SD) and four grades based on electrical properties with hoses made of rubber or thermoplastics and hose f...

Språk

Publicerad

2011-02-09

PDF · 1.095 SEK
Standard · Svensk standard SS-ISO 18752:2006/Amd 1:2010

Slang och slangledningar av gummi - Ståltrådsarmerade och textilarmerade hydraulslangar med ett arbetstryck per serie - Krav - Tillägg 1 (ISO 18752...

-

Språk

Publicerad

2010-11-17

Upphävd

2011-02-24

PDF · 375 SEK
Standard · Svensk standard SS-ISO 12151-1:2010

Hydraulik och pneumatik - Anslutningar för hydraulik och allmän användning - Slanganslutningar - Del 1: Slanganslutningar med O-ringstätningar enli...

This part of ISO 12151 specifies the general and dimensional requirements for the design and performance of hose fittings with O-ring face seal ends in accordance with ISO 8434-3, made of carbon st...

Språk

Publicerad

2010-10-26

PDF · 745 SEK
Visa varukorgen Fortsätt handla 0
Varukorgen Stäng
Annonstext