426 träffar på

Standard · ASTM ASTM D4684

Standard Test Method for Determination of Yield Stress and Apparent Viscosity of Engine Oils at Low Temperature

1.1 This test method covers the measurement of the yield stress and viscosity of engine oils after cooling at controlled rates over a period exceeding 45 h to a final test temperat

Språk

Publicerad

2013-04-19

PDF · 611 SEK
Standard · ASTM ASTM D3829

Standard Test Method for Predicting the Borderline Pumping Temperature of Engine Oil

1.1 This test method covers the prediction of the borderline pumping temperature (BPT) of engine oils through the use of a 16-h cooling cycle over the temperature range from 0 to &

Språk

Publicerad

2013-04-19

PDF · 533 SEK
Standard · ASTM ASTM D4308

Standard Test Method for Electrical Conductivity of Liquid Hydrocarbons by Precision Meter

1.1 This test method covers and applies to the determination of the “rest” electrical conductivity of aviation fuels and other similar low-conductivity hydrocarbon li

Språk

Publicerad

2013-04-19

PDF · 533 SEK
Standard · ASTM ASTM D5501

Standard Test Method for Determination of Ethanol and Methanol Content in Fuels Containing Greater than 20% Ethanol by Gas Chromatography

1.1 This test method covers the determination of the ethanol content of hydrocarbon blends containing greater than 20% ethanol. This method is applicable to denatured fuel ethanol,

Språk

Publicerad

2013-04-19

PDF · 611 SEK
Standard · ASTM ASTM D4378

Standard Practice for In-Service Monitoring of Mineral Turbine Oils for Steam, Gas, and Combined Cycle Turbines

1.1 This practice covers the requirements for the effective monitoring of mineral turbine oils in service in steam and gas turbines, as individual or combined cycle turbines, used

Språk

Publicerad

2013-04-19

PDF · 611 SEK
Standard · ASTM ASTM D4814

Standard Specification for Automotive Spark-Ignition Engine Fuel

1.1 This specification covers the establishment of requirements of automotive fuels for ground vehicles equipped with spark-ignition engines. This specification describes the various ch...

Språk

Publicerad

2013-03-25

PDF · 767 SEK
Standard · ASTM ASTM D5305

Standard Test Method for Determination of Ethyl Mercaptan in LP-Gas Vapor

1.1 This test method covers a rapid and simple procedure using length of stain tubes for field measurement of ethyl mercaptan in the vapor phase of LP-gas systems. Although length-

Språk

Publicerad

2013-03-25

PDF · 533 SEK
Standard · ASTM ASTM D5453

Standard Test Method for Determination of Total Sulfur in Light Hydrocarbons, Spark Ignition Engine Fuel, Diesel Engine Fuel, and Engine Oil by Ul...

1.1 This test method covers the determination of total sulfur in liquid hydrocarbons, boiling in the range from approximately 25 to 400°C, with viscosities between approxima

Språk

Publicerad

2013-03-25

PDF · 611 SEK
Standard · ASTM ASTM D5708

Standard Test Methods for Determination of Nickel, Vanadium, and Iron in Crude Oils and Residual Fuels by Inductively Coupled Plasma (ICP) Atomi...

1.1 These test methods cover the determination of nickel, vanadium, and iron in crude oils and residual fuels by inductively coupled plasma (ICP) atomic emission spectrometry. Two

Språk

Publicerad

2013-03-25

PDF · 533 SEK
Standard · ASTM ASTM D5133

Standard Test Method for Low Temperature, Low Shear Rate, Viscosity/Temperature Dependence of Lubricating Oils Using a Temperature-Scanning Techn...

1.1 This test method covers the measurement of the apparent viscosity of engine oil at low temperatures.

Språk

Publicerad

2013-03-25

PDF · 611 SEK
Standard · ASTM ASTM D5798

Standard Specification for Ethanol Fuel Blends for Flexible-Fuel Automotive Spark-Ignition Engines

1.1 This specification covers the requirements for automotive fuel blends of ethanol and gasoline for use in ground vehicles equipped with flexible-fuel spark-ignition engines. Fue This ...

Språk

Publicerad

2013-03-25

PDF · 533 SEK
Standard · ASTM ASTM D5966

Standard Test Method for Evaluation of Engine Oils for Roller Follower Wear in Light-Duty Diesel Engine

1.1 This engine lubricant test method is commonly referred to as the Roller Follower Wear Test. Its primary result, roller follower shaft wear in the hydraulic valve lifter assembl

Språk

Publicerad

2013-03-25

PDF · 611 SEK
Standard · ASTM ASTM D4741

Standard Test Method for Measuring Viscosity at High Temperature and High Shear Rate by Tapered-Plug Viscometer

1.1 This test method2 covers the laboratory determination of the viscosity of oils at 150&#x0

Språk

Publicerad

2013-03-25

PDF · 533 SEK
Standard · ASTM ASTM D6045

Standard Test Method for Color of Petroleum Products by the Automatic Tristimulus Method

1.1 This test method covers the automatic determination of color of a wide variety of petroleum products such as undyed motor and aviation gasoline, aviation turbine fuels, naphth

Språk

Publicerad

2013-03-25

PDF · 533 SEK
Standard · ASTM ASTM D4806

Standard Specification for Denatured Fuel Ethanol for Blending with Gasolines for Use as Automotive Spark-Ignition Engine Fuel

1.1 This specification covers nominally anhydrous denatured fuel ethanol intended to be blended with unleaded or leaded gasolines at 1 to 10 volume % for use as automotive sp T...

Språk

Publicerad

2013-03-25

PDF · 533 SEK
Standard · ASTM ASTM D3944

Standard Test Method for Solidification Point of Petroleum Wax

1.1&#x00a0;This test method covers a procedure for rapidly determining the solidification point of petroleum wax. <span class="note

Språk

Publicerad

2013-03-25

PDF · 468 SEK
Standard · ASTM ASTM D4627

Standard Test Method for Iron Chip Corrosion for Water&ndash;Miscible Metalworking Fluids

1.1&#x00a0;This test method covers evaluation of the ferrous corrosion control characteristics of water&#x2013;miscible metalworking fluids. <p class

Språk

Publicerad

2012-11-23

PDF · 468 SEK
Standard · ASTM ASTM D3828

Standard Test Methods for Flash Point by Small Scale Closed Cup Tester

1.1&#x00a0;These test methods cover procedures for flash point tests, within the range of &#x2013;30 to 300&#x00b0;C, of petroleum products and biodiesel liquid fuels, using a small scale

Språk

Publicerad

2012-11-23

PDF · 533 SEK
Standard · ASTM ASTM D5191

Standard Test Method for Vapor Pressure of Petroleum Products (Mini Method)

1.1&#x00a0;This test method covers the use of automated vapor pressure instruments to determine the total vapor pressure exerted in vacuum by air-containing, volatile, liquid petroleum pr

Språk

Publicerad

2012-11-23

PDF · 533 SEK
Standard · ASTM ASTM D5452

Standard Test Method for Particulate Contamination in Aviation Fuels by Laboratory Filtration

1.1&#x00a0;This test method covers the gravimetric determination by filtration of particulate contaminant in a sample of aviation turbine fuel delivered to a laboratory. <div class="S

Språk

Publicerad

2012-11-23

PDF · 611 SEK
Standard · ASTM ASTM D4857

Standard Test Method for Determination of the Ability of Lubricants to Minimize Ring Sticking and Piston Deposits in Two-Stroke-Cycle Gasoline Eng...

1.1&#x00a0;This test method2 evaluates the performance of lubricants intended for use in two-stroke-

Språk

Publicerad

2012-11-01

PDF · 533 SEK
Standard · ASTM ASTM D5191

Standard Test Method for Vapor Pressure of Petroleum Products (Mini Method)

1.1 This test method covers the use of automated vapor pressure instruments to determine the total vapor pressure exerted in vacuum by air-containing, volatile, liquid petroleum products, including...

Språk

Publicerad

2012-09-21

Upphävd

2012-09-01

PDF · 533 SEK
Standard · ASTM ASTM D5184

Standard Test Methods for Determination of Aluminum and Silicon in Fuel Oils by Ashing, Fusion, Inductively Coupled Plasma Atomic Emission Spectro...

1.1&#x00a0;These test methods cover the determination of aluminum and silicon in fuel oils at concentrations between 5 and 150 mg/kg for aluminum and 10 and 250 mg/kg for silicon.</di

Språk

Publicerad

2012-09-21

PDF · 533 SEK
Standard · ASTM ASTM D6080

Standard Practice for Defining the Viscosity Characteristics of Hydraulic Fluids

1.1&#x00a0;This practice covers all hydraulic fluids based either on petroleum, synthetic, or naturally-occurring base stocks. It is not intended for water-containing hydraulic fluids.</p

Språk

Publicerad

2012-09-21

PDF · 533 SEK
Standard · ASTM ASTM D3831

Standard Test Method for Manganese in Gasoline By Atomic Absorption Spectroscopy

1.1&#x00a0;This test method covers the determination of the total manganese content, present as methylcyclopentadienyl manganese tricarbonyl (MMT),<sup cl

Språk

Publicerad

2012-09-21

PDF · 468 SEK
Standard · ASTM ASTM D5762

Standard Test Method for Nitrogen in Petroleum and Petroleum Products by Boat-Inlet Chemiluminescence

1.1 This test method covers the determination of nitrogen in liquid hydrocarbons, including petroleum process streams and lubricating oils in the concentration range from 40 to 10 000 &#x03BC;g...

Språk

Publicerad

2012-08-17

PDF · 533 SEK
Standard · ASTM ASTM D6121

Standard Test Method for Evaluation of Load-Carrying Capacity of Lubricants Under Conditions of Low Speed and High Torque Used for Final Hypoid Dr...

1.1&#x00a0;This test method is commonly referred to as the L-37 test.2 This test method covers a tes

Språk

Publicerad

2012-08-17

PDF · 611 SEK
Standard · ASTM ASTM D5950

Standard Test Method for Pour Point of Petroleum Products (Automatic Tilt Method)

1.1&#x00a0;This test method covers the determination of pour point of petroleum products by an automatic instrument that tilts the test jar during cooling and detects movement of the surf

Språk

Publicerad

2012-08-17

PDF · 533 SEK
Standard · ASTM ASTM D5771

Standard Test Method for Cloud Point of Petroleum Products (Optical Detection Stepped Cooling Method)

1.1 This test method covers the description of the determination of the cloud point of petroleum products and biodiesel fuels that are transparent in layers 40 mm in thickness, by an automatic inst...

Språk

Publicerad

2012-08-17

PDF · 533 SEK
Standard · ASTM ASTM D5967

Standard Test Method for Evaluation of Diesel Engine Oils in T-8 Diesel Engine

1.1&#x00a0;This test method covers an engine test procedure for evaluating diesel engine oils for performance characteristics, including viscosity increase and soot concentrations (loadin

Språk

Publicerad

2012-08-17

PDF · 767 SEK
Visa varukorgen Fortsätt handla 0
Varukorgen Stäng
Annonstext