1.1 This specification covers requirements for electrodeposited zinc coatings applied to iron or steel articles to protect them from corrosion. It does not cover electrodeposited zinc-coated steel...
2011-11-18
1.1 This test method covers the determination of water existing in a sample of sulfonated or sulfated oil, or both, by distilling the sample with a volatile solvent. The test method is applicable o...
1995-01-01
1.1 This guide covers some generally accepted laboratory methodologies that are used for evaluating corrosion inhibitors for oilfield and refinery applications in well defined flow
2006-11-01
1.1 This test method covers the use of the FDA migration cell in the extraction of components and permits quantitation of individual migrants from plastic materials by suitable extracting liquids, ...
2012-02-24
1.1 This practice covers techniques that are of general use in the qualitative analysis of samples by thermogravimetric analysis (TGA) coupled with infrared (IR) spectrometric techniques. The combi...
2005-09-01
1.1 This specification covers requirements and test methods for materials, dimensions, workmanship, flattening resistance, impact resistance, pipe stiffness, extrusion quality, joi This ...
2007-09-05
1.1 This test method determines the amount of bromine-reactive material in aromatic hydrocarbons and is thus a measure of trace amounts of unsaturates in these materials. It is applicable to mat...
2007-12-05
1.1 The following continued airworthiness requirements apply for the manufacture of weight-shift-control aircraft and their qualification for possible certification. 1.2 This specification applies...
2008-03-12
1.1 This test method covers the measurement of the optical angular deviation of a light ray imposed by flat transparent parts such as a commercial or military aircraft windshield, canopy or cabin w...
2010-09-17
1.1 Purpose—The purpose of this classification is to define seven standard environmental condition of property area types for Department of Defense (DoD) real property at a closi
1998-09-10
1.1 The three radiant energy weathering procedures described in these test methods are intended to determine the effects of extended outdoor exposure-induced stress that may occur during service li...
1999-10-10
2008-05-07
1.1 This specification covers annealed, drawn, or rolled shapes for electrical heating and resistance purposes of alloys consisting mainly of iron, chromium, and aluminum as detail This ...
1.1 This guide is intended for tutorial purposes only. It describes the general requirements, methods, and procedures for the nondestructive identification and sorting of metals. 1.2 It provides gu...
2004-03-01
1.1 This specification covers the determination of heat stability of steam turbine shafts and rotor forgings to ensure stability at operating temperature. This specification is not ordinarily appli...
2007-10-10
1.1 This guide covers the application and subsequent documentation of a groundwater flow model to a particular site or problem. In this context, “groundwater flow model”</span
2004-11-01
1.1 This specification covers oriented polypropylene (OPP) film in the thickness range from 10 to 75 μm (0.4 to 3.0 mils). 1.2 The film can contain colorants, stabilizers, or other addi ...
2009-05-01
1.1 This specification establishes requirements for material, performance, workmanship and test methods for the qualification of 2 in. and smaller mechanical couplings that connect to DR 15.5 and l...
2002-04-10
1.1 This test method uses a paddle rotational viscometer to measure the apparent viscosity of emulsified asphalt with viscosities between 30 and 1500 mPa·s (centipoises) at 50
1.1 This test method covers the determination of the organically combined sulfuric anhydride existing in a sample of sulfated oil by extracting the undecomposed sulfated fat and other fatty matter ...
2003-05-10
1.1 These test methods cover procedures for planing, routing/shaping, turning, mortising, boring, and sanding, all of which are common wood-working operations used in the manufacture of wood produc...
2011-09-16
1.1 This test method covers an accelerated test method for evaluating the tendency of gas leak detection fluids (LDFs) to cause stress corrosion cracking (SCC) of brass components in compressed gas...
2005-07-01
1.1 This specification covers greige fabrics woven from “E” electrical glass fiber yarns. This specification can also be applied to fabrics made of other glass fiber ty This s...
2011-05-20
1.1 This test method provides a procedure for determining the effects of climatic temperature on the tensile strength and elongation properties of geotextiles. 1.2 The effect of temperature on the ...
1996-07-10
1.1 This test method allows for determination of expansion potential of compacted soils when inundated with distilled water. 1.2 This test method provides a simple yet sensitive method for determi...
1.1 This test method provides a procedure for determining the outgassing potential of a sealant backing when it is punctured during or after installation, with the puncture occurring before the se...
2005-01-01
1.1 This guide covers an overview of test methods that may be used to obtain information relating to the dimensions of pores, the pore size distribution, the degree of porosity, interconnectivit...
2010-03-01
1.1 This practice describes the proper procedures for preserving zooplankton samples with either formaldehyde, ethanol, glutaraldehyde, Lugol's iodine solution, or vinegar (
2004-04-01
1.1 This terminology is used or is likely to be used in test methods, specifications, guides, and practices related to agricultural tank mix adjuvants. 1.2 These definitions are written to ensure ...
1.1 This practice describes procedures for fabricating both green and sintered test bars of silicon carbide and silicon nitride containing both internal and surface voids at prescribed locations. 1...
2004-05-01
1.1 This test method covers the determination of elastic properties of “as produced” elastomeric yarns made from rubber, spandex or other elastomers. Elastic propertie
2007-01-01