21286 träffar på

ASTM F1551
Standard · ASTM ASTM F1551

Standard Test Methods for Comprehensive Characterization of Synthetic Turf Playing Surfaces and Materials

1.1 These test methods establish a recommended list from which suitable test methods shall be selected for the identification of physical property characteristics and comparison of the performance ...

Språk

Publicerad

2009-07-01
PDF · 611 SEK
ASTM A423/A423M
Standard · ASTM ASTM A423/A423M

Standard Specification for Seamless and Electric-Welded Low-Alloy Steel Tubes

1.1 This specification covers minimum-wall-thickness, seamless and electric-resistance welded, low-alloy steel tubes for pressure containing parts such as economizers or other applications where ...

Språk

Publicerad

2009-11-01
PDF · 468 SEK
ASTM E1368
Standard · ASTM ASTM E1368

Standard Practice for Visual Inspection of Asbestos Abatement Projects

1.1 This practice covers procedures for performing visual inspections of asbestos response actions to: 1.1.1 Establish the extent of the required work before it begins; 1.1.2 Determine the progress...

Språk

Publicerad

2011-12-16
PDF · 611 SEK
ASTM C1480/C1480M
Standard · ASTM ASTM C1480/C1480M

Standard Specification for Packaged, Pre-Blended, Dry, Combined Materials for Use in Wet or Dry Shotcrete Application

1.1 This specification covers laboratory performance standards for pre-blended, dry, packaged, combined materials for use in wet or dry shotcrete applications that are delivered to a pur This speci...

Språk

Publicerad

2007-05-09
PDF · 468 SEK
ASTM D6998
Standard · ASTM ASTM D6998

Standard Practice for Evaluating Aggregate Coating using Emulsified Asphalts

1.1 This practice covers those emulsified asphalts intended for use by mixing with aggregate. It is not applicable to rapid-setting types or diluted materials used for tack coats, priming, ...

Språk

Publicerad

2011-11-18
PDF · 468 SEK
ASTM E2340/E2340M
Standard · ASTM ASTM E2340/E2340M

Standard Test Method for Measuring the Skid Resistance of Pavements and Other Trafficked Surfaces Using a Continuous Reading, Fixed-Slip Technique

1.1 This test method covers the measurement of the skid resistance of a pavement or other trafficked surface using the continuous reading, fixed-slip technique. 1.2 This test method covers braked w...

Språk

Publicerad

2011-05-20
PDF · 533 SEK
ASTM D6293
Standard · ASTM ASTM D6293

Standard Test Method for Oxygenates and Paraffin, Olefin, Naphthene, Aromatic (O-PONA) Hydrocarbon Types in Low-Olefin Spark Ignition Engine Fuels ...

1.1 This test method provides for the quantitative determination of oxygenates, paraffins, olefins, naphthenes, and aromatics in low-olefin spark-ignition engine fuels by multidimensional gas chrom...

Språk

Publicerad

2003-05-10

Upphävd

2009-09-01
PDF · 533 SEK
ASTM E128
Standard · ASTM ASTM E128

Standard Test Method for Maximum Pore Diameter and Permeability of Rigid Porous Filters for Laboratory Use

1.1 This test method covers the determination of maximum pore diameter and permeability of rigid porous filters used in the laboratory for filtration or diffusion. They are applicable to filters m...

Språk

Publicerad

2005-05-01
PDF · 468 SEK
ASTM D5004
Standard · ASTM ASTM D5004

Standard Test Method for Real Density of Calcined Petroleum Coke by Xylene Displacement

1.1 This test method covers the determination of the real density (RD) of calcined petroleum coke. Real density, by definition, is obtained when the particle size of the test specimen is smaller th...

Språk

Publicerad

2011-09-16
PDF · 468 SEK
ASTM C597
Standard · ASTM ASTM C597

Standard Test Method for Pulse Velocity Through Concrete

1.1 This test method covers the determination of the propagation velocity of longitudinal stress wave pulses through concrete. This test method does not apply to the propagation of other types o...

Språk

Publicerad

2009-12-15
PDF · 468 SEK
ASTM D6930
Standard · ASTM ASTM D6930

Standard Test Method for Settlement and Storage Stability of Emulsified Asphalts

1.1 This test method covers the ability of an emulsified asphalt to remain as a uniform dispersion during storage. It is applicable to emulsified asphalts composed principally of a semisolid or...

Språk

Publicerad

2011-05-20
PDF · 468 SEK
ASTM D3280
Standard · ASTM ASTM D3280

Standard Test Methods for Analysis of White Zinc Pigments

1.1 These test methods cover procedures for the analysis of white zinc pigments. 1.2 The analytical procedures appear in the following order:<table summary="TABLE 1" frame="void" id="n00001"...

Språk

Publicerad

2004-11-01
PDF · 533 SEK
ASTM C1695
Standard · ASTM ASTM C1695

Standard Specification for Fabrication of Flexible Removable and Reusable Blanket Insulation for Hot Service

1.1 This specification covers the minimum requirements for materials and fabrication of flexible removable and reusable blanket insulation for hot service, from above ambient temperatures to 1000&a...

Språk

Publicerad

2010-06-18
PDF · 468 SEK
ASTM D5002
Standard · ASTM ASTM D5002

Standard Test Method for Density and Relative Density of Crude Oils by Digital Density Analyzer

1.1 This test method covers the determination of the density or relative density of crude oils that can be handled in a normal fashion as liquids at test temperatures between 15 and 35&#x00B0;...

Språk

Publicerad

2005-11-01
PDF · 533 SEK
ASTM D7203
Standard · ASTM ASTM D7203

Standard Practice for Screening Trichloroethylene (TCE)-Contaminated Media Using a Heated Diode Sensor

1.1 This practice describes procedures for screening media known to contain the halogenated volatile organic compound (HVOC), trichloroethylene (TCE). Procedure A is to be used for screening soil ...

Språk

Publicerad

2011-09-16
PDF · 611 SEK
ASTM D6306
Standard · ASTM ASTM D6306

Standard Guide for Placement and Use of Diffusion Controlled Passive Monitors for Gaseous Pollutants in Indoor Air

1.1 This guide covers the placement and use of diffusion controlled monitors in the indoor atmosphere. 1.2 Diffusion controlled passive monitors within this guide include both area and personal mon...

Språk

Publicerad

2010-08-20
PDF · 468 SEK
ASTM D3117
Standard · ASTM ASTM D3117

Standard Test Method for Wax Appearance Point of Distillate Fuels (Withdrawn 2010)

1.1 This test method covers the detection of wax in burner fuels, diesel fuels, and turbine engine fuels in the range from -26 to +2&#176;C. It is applicable to a dark-colored oil if the stirre...

Språk

Publicerad

2003-03-10

Upphävd

2010-05-01
PDF · 468 SEK
ASTM D7308
Standard · ASTM ASTM D7308

Standard Practice for Sample Preparation of Thermoplastic Traffic Marking Materials

1.1&#x00a0;This practice covers the proper preparation of test specimens of thermoplastic traffic marking materials obtained to ensure test results are representative of the material bein

Språk

Publicerad

2007-09-05
PDF · 468 SEK
ASTM E690
Standard · ASTM ASTM E690

Standard Practice for In Situ Electromagnetic (Eddy-Current) Examination of Nonmagnetic Heat Exchanger Tubes

1.1 This practice describes procedures to be followed during eddy-current examination (using an internal, probe-type, coil assembly) of nonmagnetic tubing that has been installed in a heat exchange...

Språk

Publicerad

2010-09-17
PDF · 468 SEK
ASTM F2549
Standard · ASTM ASTM F2549

Standard Consumer Safety Specification for Frame Child Carriers

1.1 This consumer safety specification covers performance requirements, test methods, and marking requirements to promote safe use of frame child carriers. 1.2 This consumer safety specification is...

Språk

Publicerad

2009-07-01
PDF · 533 SEK
ASTM D5604
Standard · ASTM ASTM D5604

Standard Test Methods for Precipitated Silica&mdash;Surface Area by Single Point B.E.T. Nitrogen Adsorption

1.1 These test methods cover a procedure to measure the surface area of precipitated hydrated silicas by, a single point approximation of the Brunauer, Emmett, and Teller (B.E.T.) theory of multila...

Språk

Publicerad

2006-10-01
PDF · 533 SEK
ASTM E405
Standard · ASTM ASTM E405

Standard Test Methods for Wear Testing Rotary Operators for Windows

1.1 These test methods describe the wear testing of gear-type rotary operating devices used for opening and closing windows (Note 1). 1.2 These test methods do not directly determine the effects of...

Språk

Publicerad

2004-04-01
PDF · 468 SEK
ASTM A266/A266M
Standard · ASTM ASTM A266/A266M

Standard Specification for Carbon Steel Forgings for Pressure Vessel Components

1.1 This specification covers four grades of carbon steel forgings for boilers, pressure vessels, and associated equipment. Note 1&#8212;Designations have been changed as follows: This speci...

Språk

Publicerad

2011-11-18
PDF · 468 SEK
ASTM D4837
Standard · ASTM ASTM D4837

Standard Specification for Propylene Glycol Monomethyl Ether

1.1&#x00a0;This specification covers propylene glycol monomethyl ether (PM). Note This specification establishes the properties and requirements for propylene glycol monomethyl ether. Specimens...

Språk

Publicerad

2007-09-05
PDF · 468 SEK
ASTM D6559
Standard · ASTM ASTM D6559

Standard Test Method for Determination of Thermogravimetric (TGA) Air Reactivity of Baked Carbon Anodes and Cathode Blocks

1.1 This test method covers the thermogravimetric (TGA) determination of air reactivity and dusting of shaped carbon anodes and cathode blocks used in the aluminum reduction industry. The apparatus...

Språk

Publicerad

2005-05-01
PDF · 533 SEK
ASTM F900
Standard · ASTM ASTM F900

Standard Specification for Industrial and Commercial Swing Gates

1.1 This specification covers detailed requirements for chain link fence gates, gate posts and accessories for both single and double swing-type gates for industrial and commercial application. Thi...

Språk

Publicerad

2012-02-24
PDF · 468 SEK
ASTM D3556
Standard · ASTM ASTM D3556

Standard Test Method for Deposition on Glassware During Mechanical Dishwashing

1.1 This test method covers a procedure for measuring performance of a mechanical dishwashing detergent in terms of the buildup of spots and film on glassware. It is designed to evaluate household ...

Språk

Publicerad

2009-12-01
PDF · 468 SEK
ASTM E1486
Standard · ASTM ASTM E1486

Standard Test Method for Determining Floor Tolerances Using Waviness, Wheel Path and Levelness Criteria

1.1 This test method covers data collection and analysis procedures to determine surface flatness and levelness by calculating waviness indices for survey lines and surfaces, elevation differences...

Språk

Publicerad

2004-04-01
PDF · 611 SEK
ASTM E2783
Standard · ASTM ASTM E2783

Standard Test Method for Assessment of Antimicrobial Activity for Water Miscible Compounds Using a Time-Kill Procedure

1.1 This test method measures the changes of a population of aerobic and anaerobic microorganisms within a specific sampling time when tested against antimicrobial test materials in vitro. The orga...

Språk

Publicerad

2011-11-18
PDF · 533 SEK
ASTM D624
Standard · ASTM ASTM D624

Standard Test Method for Tear Strength of Conventional Vulcanized Rubber and Thermoplastic Elastomers

1.1 This test method describes procedures for measuring a property of conventional vulcanized rubber and thermoplastic elastomers called tear strength. 1.2 The values stated in SI units are to be ...

Språk

Publicerad

2008-03-12
PDF · 533 SEK
Förfina din sökning genom att visa:
...som handlar om:

Ämnesområden (0)

Avbryt

Branscher (0)

Avbryt

Syfte (0)

Avbryt

Material (0)

Avbryt
Visa varukorgen Fortsätt handla 0
Varukorgen Stäng
Annonstext