21300 träffar på

ASTM D3698
Standard · ASTM ASTM D3698

Standard Practice for Solvent Vapor Degreasing Operations

1.1 This practice recommends work practices for conventional vapor degreasing operations utilizing any solvent or solvent blend that has been categorized as nonflammable. 1.2 This practice is not i...

Språk

Publicerad

2010-06-01
PDF · 533 SEK
ASTM D5159
Standard · ASTM ASTM D5159

Standard Guide for Dusting Attrition of Granular Activated Carbon

1.1 This guide presents a procedure for evaluating the resistance to dusting attrition of granular activated carbons. For the purpose of this guide, the dust attrition coefficient, DA, is defined a...

Språk

Publicerad

2004-02-01
PDF · 468 SEK
ASTM A705/A705M
Standard · ASTM ASTM A705/A705M

Standard Specification for Age-Hardening Stainless Steel Forgings

1.1 This specification covers age-hardening stainless steel forgings for general use. 1.2 The values stated in either SI units or inch-pound units are to be regarded separately as standard. The v...

Språk

Publicerad

2004-01-01
PDF · 533 SEK
ASTM E660
Standard · ASTM ASTM E660

Standard Practice for Accelerated Polishing of Aggregates or Pavement Surfaces Using a Small-Wheel, Circular Track Polishing Machine

1.1 This practice describes a laboratory procedure for estimating the extent to which aggregates or pavement surfaces are likely to polish when subjected to traffic. Specimens to be evaluated for p...

Språk

Publicerad

2008-03-12
PDF · 533 SEK
ASTM D4683
Standard · ASTM ASTM D4683

Standard Test Method for Measuring Viscosity of New and Used Engine Oils at High Shear Rate and High Temperature by Tapered Bearing Simulator Visco...

1.1 This test method covers the laboratory determination of the viscosity of engine oils at 150 &#x00B0;C and 1.0&#x00B7;106 s&#x2212;1</

Språk

Publicerad

2011-04-15
PDF · 611 SEK
ASTM E1148
Standard · ASTM ASTM E1148

Standard Test Method for Measurements of Aqueous Solubility (Withdrawn 2013)

1.1 This test method covers procedures for measurement of the solubility of organic compounds in water. Three procedures are described which will work over a variety of solubility ranges. These pro...

Språk

Publicerad

2008-02-01

Upphävd

2013-03-15
PDF · 468 SEK
ASTM F665
Standard · ASTM ASTM F665

Standard Classification for Vinyl Chloride Plastics Used in Biomedical Application

1.1 This classification provides guidance to engineers and users in the selection of practical vinyl chloride plastics for medical applications and further provides a method for specifying these ma...

Språk

Publicerad

2009-08-01
PDF · 468 SEK
ASTM D6217
Standard · ASTM ASTM D6217

Standard Test Method for Particulate Contamination in Middle Distillate Fuels by Laboratory Filtration

1.1 This test method covers the determination of the mass of particulate contamination in a middle distillate fuel by filtration. This test method is suitable for all No. 1 and No. 2 grades in Spe...

Språk

Publicerad

2011-09-16
PDF · 533 SEK
ASTM G17
Standard · ASTM ASTM G17

Standard Test Method for Penetration Resistance of Pipeline Coatings (Blunt Rod) (Withdrawn 2007)

1.1 This accelerated test method is used to determine the relative resistance of steel pipeline coatings to penetration or deformation by a blunt rod under a specified load. The test method is inte...

Språk

Publicerad

1998-07-10

Upphävd

2007-03-21
PDF · 533 SEK
ASTM D7024
Standard · ASTM ASTM D7024

Standard Test Method for Steady State and Dynamic Thermal Performance of Textile Materials (Withdrawn 2013)

1.1 This test method covers the determination of the overall thermal transmission coefficient due to conduction for dry specimens of textile fabrics, battings, and other materials and the determina...

Språk

Publicerad

2004-03-01

Upphävd

2013-03-18
PDF · 468 SEK
ASTM F2263
Standard · ASTM ASTM F2263

Standard Test Method for Evaluating the Oxidative Resistance of Polyethylene (PE) Pipe to Chlorinated Water

1.1 This test method describes the general requirements for evaluating the long-term, chlorinated water, oxidative resistance of polyethylene (PE), used in cold water supply or service systems by e...

Språk

Publicerad

2007-12-05
PDF · 533 SEK
ASTM B135
Standard · ASTM ASTM B135

Standard Specification for Seamless Brass Tube

1.1 This specification covers seamless round and rectangular including square copper alloy tube in straight lengths. Ten alloys are specified having the following nominal compositions: This specif...

Språk

Publicerad

2011-03-18
PDF · 533 SEK
ASTM B762
Standard · ASTM ASTM B762

Standard Test Method of Variables Sampling of Metallic and Inorganic Coatings

1.1 This test method provides sampling plans that are intended for use in the inspection of metallic and inorganic coatings on products for the purpose of deciding whether submitted lots of coated...

Språk

Publicerad

2005-05-15
PDF · 533 SEK
ASTM F900
Standard · ASTM ASTM F900

Standard Specification for Industrial and Commercial Swing Gates

1.1 This specification covers detailed requirements for chain link fence gates, gate posts and accessories for both single and double swing-type gates for industrial and commercial application. Thi...

Språk

Publicerad

2012-02-24
PDF · 468 SEK
ASTM C1576
Standard · ASTM ASTM C1576

Standard Test Method for Determination of Slow Crack Growth Parameters of Advanced Ceramics by Constant Stress Flexural Testing (Stress Rupture) at...

1.1 This standard test method covers the determination of slow crack growth (SCG) parameters of advanced ceramics by using constant stress flexural testing in which time to failure of flexure t...

Språk

Publicerad

2005-06-01
PDF · 611 SEK
ASTM F2772
Standard · ASTM ASTM F2772

Standard Specification for Athletic Performance Properties of Indoor Sports Floor Systems

1.1 This specification establishes levels for athletic performance properties of multi-purpose indoor sports floor systems, excluding turf and materials specific to running tracks and tennis courts...

Språk

Publicerad

2012-02-24
PDF · 468 SEK
ASTM E1299
Standard · ASTM ASTM E1299

Standard Specification for Reusable Phase-Change-Type Fever Thermometer for Intermittent Determination of Human Temperature

1.1 This specification covers reusable phase-change-type clinical thermometers. 1.2 The following safety hazards caveat pertains only to the test method portion, Section 6, of this s This specifica...

Språk

Publicerad

1996-05-10
PDF · 468 SEK
ASTM F770
Standard · ASTM ASTM F770

Standard Practice for Ownership, Operation, Maintenance, and Inspection of Amusement Rides and Devices

1.1 This practice covers and establishes information for operating procedures of amusement rides and devices. 1.2 This standard does not purport to address all of the safety concerns, if any, associat

Språk

Publicerad

2011-09-16
PDF · 468 SEK
ASTM D7575
Standard · ASTM ASTM D7575

Standard Test Method for Solvent-Free Membrane Recoverable Oil and Grease by Infrared Determination

1.1 This test method covers the determination of oil and grease in produced and waste water samples over the concentration range outlined in Table 1 that can be extracted with an infrared-amenable ...

Språk

Publicerad

2011-12-16
PDF · 611 SEK
ASTM B578
Standard · ASTM ASTM B578

Standard Test Method for Microhardness of Electroplated Coatings

1.1 This test method covers the determination of the hardness of metallic coatings upon various substrates. The measurements are made with the Knoop indenter under a test load of 0.245 N (25 gf) o...

Språk

Publicerad

2009-09-01
PDF · 468 SEK
ASTM D692/D692M
Standard · ASTM ASTM D692/D692M

Standard Specification for Coarse Aggregate for Bituminous Paving Mixtures

1.1 This specification covers crushed stone, crushed hydraulic-cement concrete, crushed blast-furnace slag, crushed gravel, crushed expanded shale, crushed expanded clay, and crushed expanded slate...

Språk

Publicerad

2009-06-01
PDF · 468 SEK
ASTM D5366
Standard · ASTM ASTM D5366

Standard Test Method for Determining the Dynamic Performance of a Wind Vane

1.1 This test method covers the determination of the starting threshold, delay distance, and overshoot ratio of a wind vane from direct measurements in a wind tunnel. This test method is applicable...

Språk

Publicerad

2008-02-06
PDF · 468 SEK
ASTM D3406
Standard · ASTM ASTM D3406

Standard Specification for Joint Sealant, Hot-Applied, Elastomeric-Type, for Portland Cement Concrete Pavements (Withdrawn 2013)

1.1 This specification covers an elastomeric-type one component, hot-applied concrete joint sealant, resistant to weathering, for use in sealing joints and cracks in Portland cement concrete highwa...

Språk

Publicerad

2006-06-01

Upphävd

2013-03-19
PDF · 468 SEK
ASTM F25/F25M
Standard · ASTM ASTM F25/F25M

Standard Test Method for Sizing and Counting Airborne Particulate Contamination in Cleanrooms and Other Dust-Controlled Areas

1.1 This test method covers counting and sizing airborne particulate matter 5 &#x00B5;m and larger (macroparticles). The sampling areas are specifically those with contamination levels typical ...

Språk

Publicerad

2009-04-01
PDF · 533 SEK
ASTM E213
Standard · ASTM ASTM E213

Standard Practice for Ultrasonic Testing of Metal Pipe and Tubing

1.1 This practice covers a procedure for detecting discontinuities in metal pipe and tubing during a volumetric examination using ultrasonic methods. Specific techniques of the ultrasonic method ...

Språk

Publicerad

2009-06-01
PDF · 611 SEK
ASTM D3212
Standard · ASTM ASTM D3212

Standard Specification for Joints for Drain and Sewer Plastic Pipes Using Flexible Elastomeric Seals

1.1&#x00a0; This specification covers joints for plastic pipe systems intended for drain, and gravity sewerage pipe at internal or external pressures less than 25-ft head using flexible w This ...

Språk

Publicerad

2008-03-12
PDF · 468 SEK
ASTM D4962
Standard · ASTM ASTM D4962

Standard Practice for NaI(Tl) Gamma-Ray Spectrometry of Water

1.1 This practice covers the measurement of radionuclides in water by means of gamma-ray spectrometry. It is applicable to nuclides emitting gamma-rays with energies greater than 50 keV. For typica...

Språk

Publicerad

2002-02-10
PDF · 533 SEK
ASTM D6419
Standard · ASTM ASTM D6419

Standard Test Method for Volatile Content of Sheet-Fed and Coldset Web Offset Printing Inks

1.1 This test method describes a procedure for determination of the weight percent volatile content of sheet-fed and coldset web offset printing inks. Test specimens are heated at 110&#x00B0; &...

Språk

Publicerad

2009-12-01
PDF · 468 SEK
ASTM D2269
Standard · ASTM ASTM D2269

Standard Test Method for Evaluation of White Mineral Oils by Ultraviolet Absorption

1.1 This test method describes a procedure for the examination and evaluation of NF and USP grade white mineral oils. 1.2 This test method is not applicable to oils containing additives soluble in ...

Språk

Publicerad

2010-09-17
PDF · 468 SEK
ASTM D2062
Standard · ASTM ASTM D2062

Standard Test Methods for Operability of Zippers

1.1 These test methods cover procedures for determining the following characteristics of zippers: <td align="center"

Språk

Publicerad

2003-12-01
PDF · 533 SEK
Förfina din sökning genom att visa:
...som handlar om:

Ämnesområden (0)

Avbryt

Branscher (0)

Avbryt

Syfte (0)

Avbryt

Material (0)

Avbryt
Visa varukorgen Fortsätt handla 0
Varukorgen Stäng
Annonstext