1.1 This guide covers the use of overtesting in order to reduce the required number of parts that must be tested to meet a given quality acceptance standard. Overtesting is testing a sample number...
2011-09-16
1.1 This practice covers all surgeon's and examination gloves, made from either synthetic or natural rubber latex, marketed at the time this practice is published, for which there is no previous re...
2005-06-15
1.1 This practice describes the basic considerations that will help preserve different items or types of sexual assault related evidence for subsequent analysis. This practice is designed to be use...
2010-09-17
1.1 This test method covers the determination of the relative solvent power of hydrocarbon solvents used in paint and lacquer formulations. This test method is suitable for use with solve...
2011-04-15
1.1 This practice covers testing to evaluate chemical constituents, chemical and physical properties of compounding materials, and compounded and cured rubbers, which may frequently be conducted by...
2004-12-01
1.1 This specification covers seamless round and rectangular including square copper alloy tube in straight lengths. Ten alloys are specified having the following nominal compositions: This specif...
2011-03-18
1.1 This practice covers the use of X-ray fluorescence (XRF) techniques for determination of the coating weight of chromium treatments on metal substrates. These techniques are applicable for deter...
1995-05-15
1.1 This specification covers aluminum alloys in the 8000 series cited in B8 This specification covers aluminum alloys in the 8000 series in tempers ?0? and H1X or H2X bare compact-round...
2007-12-05
1.1 These test methods, Test Method A—Boiling Slurry and Test Method B—Sonic Slurry, are used to indicate the pH of the carbon black surface by measuring the pH of wa
2005-12-15
1.1 This specification covers the minimum requirements for, and methods of, application of gypsum veneer base for gypsum veneer plasters. 1.2 Gypsum veneer base shall not be used as a base for dire...
2010-10-15
1.1 This specification covers drycleaning-grade perchloroethylene suitable for use in the drycleaning industry. 1.2 The values stated in SI units are to be regarded as standard. No other units of ...
2006-02-01
1.1 This test method covers the procedure for testing the tensile breaking strength of the perforations in one-part continuous forms. 1.2 The values stated in SI units are to be regarded as standa...
2009-02-10
2010-08-01
1.1 This test method covers the determination of tensile strength of cured chemical-resistant materials in the form of molded briquets. These materials include mortars, brick and t
2008-06-01
1.1 This practice specifically addresses the criteria for determining the suitability of gravity sewers for secondary uses such as the installation of optical fiber systems. 1.1.1 This practice a...
2003-09-10
1.1 This test method covers the measurement of flow rate of water in open channels, streams, and closed conduits with a free water surface. <
2007-09-05
1.1 This test method provides a means for comparison of the burst or rupture strength of sealants on soft tissue. This test method can be used as a clinically relevant model for quality assurance...
2004-05-01
1.1 This test method covers the determination of maximum specific gravity of and density of uncompacted bituminous paving mixtures at 25°C [77°F]. 1.
1.1 This test method covers a procedure to determine the volatile content of precipitated hydrated silicas. These volatiles are generally excess water adsorbed onto the surface of the silica. This ...
1.1 This specification covers the testing technique to determine the rating velocities of a compound bow. 1.2 This specification will provide only a certification of performance, that is, the veloc...
2012-02-24
1.1 This test method ( 1, 2, 3 ) is applicable to the determination of the following analytes in finished drinking water, drinking water during intermediate stages of treatment, and the raw source...
2003-01-10
1.1 This specification is applicable in the classification of alpaca into types according to fineness. 1.2 The values stated in inch-pound units are to be regarded as standard. The values given i...
2005-03-01
1.1 This classification contains pairs of scales for classifying an aspect of the serviceability of an office facility, that is, the capability of an office facility to meet certain possible requir...
2005-05-01
1.1 This specification covers requirements and test methods for materials, dimensions and tolerances, deflection load, crush resistance, flattening resistance, impact resistance, and solvent cement...
1.1 This test method covers the use of the FDA migration cell in the extraction of components and permits quantitation of individual migrants from plastic materials by suitable extracting liquids, ...
1.1 These test methods cover the determination of the sulfur content of silanes, or of admixtures of silane and carbon black, of the type bis-(triethoxysilylpropyl)sulfane. The following test metho...
1.1 This guide covers a general methodology to develop and assess the linear relationship between results produced by a total analyzer system versus the results produced by the corresponding primar...
2010-11-19
1.1 This specification covers alloy UNS N06333 in the form of welded tube intended for heat-resisting applications and general corrosive service. 1.2 The values stated in inch-pound units are to ...
2007-01-11
1.1 This practice guides the user in selection of procedures commonly used to measure depth in water bodies that are as follows:
1.1 This guide covers general guidelines for the in vivo assessment of tissue engineered medical products (TEMPs) intended to repair or regenerate bone. TEMPs included in this guide may be composed...
2009-06-01
1.1 This test method covers the measurement of yarn number up to 4000 dtex (3600 denier) and related variability properties of filament and spun yarns using an automated tester with capability for ...
2006-06-01