21293 träffar på

Standard · ASTM ASTM E171 Standard Specification for Standard Atmospheres for Conditioning and Testing Flexible Barrier Materials 1.1 This specification defines the standard temperature and humidity for conditioning and testing of materials at nominally ambient conditions.1.2 There are many other temperature and humidity cond... Språk Publicerad 2007-04-01 Upphävd 2011-11-15

PDF · 468 SEK

Standard · ASTM ASTM C1729 Standard Specification for Aluminum Jacketing for Insulation 1.1 This specification covers aluminum jacketing for thermal and acoustical insulation operating at either above or below ambient temperatures and in both indoor and outdoor locations. It does not... Språk Publicerad 2010-11-01 Upphävd 2012-01-01

PDF · 533 SEK

Standard · ASTM ASTM E342 Standard Test Method for Determination of Chromium Oxide in Chrome Ores by Permanganate Titrimetry 1.1 This test method covers the determination of chromium oxide (Cr2O3) in chrome ores in the concentration range from 25 to 60 %.1.2 This standard does not purport to address all of the safety con... Språk Publicerad 2004-05-01 Upphävd 2011-12-01

PDF · 468 SEK

Standard · ASTM ASTM E385 Standard Test Method for Oxygen Content Using a 14-MeV Neutron Activation and Direct-Counting Technique 1.1 This test method covers the measurement of oxygen concentration in almost any matrix by using a 14-MeV neutron activation and direct-counting technique. Essentially, the same system may be used... Språk Publicerad 2007-09-05 Upphävd 2011-11-01

PDF · 533 SEK

Standard · ASTM ASTM E454 Standard Specification for Industrial Perforated Plate and Screens (Square Opening Series) 1.1 This specification covers the sizes of square opening perforated plate and screens for general industrial uses, including the separating or grading of materials according to designated nominal ... Språk Publicerad 2009-11-01 Upphävd 2011-11-15

PDF · 533 SEK

Standard · ASTM ASTM E514 Standard Test Method for Water Penetration and Leakage Through Masonry 1.1 This laboratory test method provides a procedure for determining the resistance to water penetration and leakage through unit masonry subjected to wind-driven rain. 1.2 The values stated in SI... Språk Publicerad 2008-10-08 Upphävd 2009-08-01

PDF · 468 SEK

Standard · ASTM ASTM E514/E514M Standard Test Method for Water Penetration and Leakage Through Masonry 1.1 This laboratory test method provides a procedure for determining the resistance to water penetration and leakage through unit masonry subjected to wind-driven rain. 1.2 The values stated in ei... Språk Publicerad 2009-08-01 Upphävd 2011-12-15

PDF · 533 SEK

Standard · ASTM ASTM E672 Standard Specification for Disposable Glass Micropipets 1.1 This specification covers two different types of disposable micropipets, calibrated "to contain," used in measuring microlitre volumes of liquids.1.2 The values stated in SI units are to be reg... Språk Publicerad 2006-11-01 Upphävd 2011-12-01

PDF · 533 SEK

Standard · ASTM ASTM E674 Standard Specification for Industrial Perforated Plate and Screens (Round Opening Series) 1.1 This specification covers the sizes of round opening perforated plate and screens for general industrial uses, including the separating or grading of materials according to designated nominal ... Språk Publicerad 2009-11-01 Upphävd 2011-11-15

PDF · 611 SEK

Standard · ASTM ASTM E691 Standard Practice for Conducting an Interlaboratory Study to Determine the Precision of a Test Method 1.1 This practice describes the techniques for planning, conducting, analyzing, and treating the results of an interlaboratory study (ILS) of a test method. The statistical techniques described in... Språk Publicerad 2009-09-01 Upphävd 2011-11-01

PDF · 767 SEK

Standard · ASTM ASTM E721 Standard Guide for Determining Neutron Energy Spectra from Neutron Sensors for Radiation-Hardness Testing of Electronics 1.1 This guide covers procedures for determining the energy-differential fluence spectra of neutrons used in radiation-hardness testing of electronic semiconductor devices. The types of neutron sou... Språk Publicerad 2007-05-09 Upphävd 2011-11-01

PDF · 611 SEK

Standard · ASTM ASTM E839 Standard Test Methods for Sheathed Thermocouples and Sheathed Thermocouple Material 1.1 These are test methods for sheathed thermocouple material and assemblies.1.2 The tests are intended to ensure quality control and to evaluate the suitability of sheathed thermocouple material o... Språk Publicerad 2005-11-01 Upphävd 2011-11-01

PDF · 611 SEK

Standard · ASTM ASTM E878 Standard Test Method for Determination of Titanium in Iron Ores and Related Materials by Diantipyrylmethane Ultraviolet Spectrometry 1.1 This test method covers the determination of titanium in iron ores, concentrates, and agglomerates in the concentration range from 0.01 to 6.0 % titanium.1.2 This standard does not purport to a... Språk Publicerad 2005-05-01 Upphävd 2011-12-15

PDF · 468 SEK

Standard · ASTM ASTM E1162 Standard Practice for Reporting Sputter Depth Profile Data in Secondary Ion Mass Spectrometry (SIMS) 1.1 This practice covers the information needed to describe and report instrumentation, specimen parameters, experimental conditions, and data reduction procedures. SIMS sputter depth profiles can ... Språk Publicerad 2007-01-11 Upphävd 2011-11-01

PDF · 468 SEK

Standard · ASTM ASTM E1179 Standard Specification for Sound Sources Used for Testing Open Office Components and Systems 1.1 This specification states the requirements for sound sources used for measuring the speech privacy between open offices or for measuring the laboratory performance of acoustical components (see... Språk Publicerad 2008-01-09 Upphävd 2011-11-01

PDF · 468 SEK

Standard · ASTM ASTM E1306 Standard Practice for Preparation of Metal and Alloy Samples by Electric Arc Remelting for the Determination of Chemical Composition 1.1 This practice covers the preparation of solid samples of reactive and refractory metals and alloys by electric arc remelting. The samples for melting may be in the form of chips, turnings, wire... Språk Publicerad 2007-01-15 Upphävd 2011-11-01

PDF · 468 SEK

Standard · ASTM ASTM E1348 Standard Test Method for Transmittance and Color by Spectrophotometry Using Hemispherical Geometry 1.1 This test method describes the instrumental measurement of the transmission properties and color of object-color specimens by the use of a spectrophotometer or spectrocolorimeter with a hemisph... Språk Publicerad 2002-06-10 Upphävd 2011-11-01

PDF · 468 SEK

Standard · ASTM ASTM E1348 Standard Test Method for Transmittance and Color by Spectrophotometry Using Hemispherical Geometry 1.1 This test method describes the instrumental measurement of the transmission properties and color of object-color specimens by the use of a spectrophotometer or spectrocolorimeter with a hemisph... Språk Publicerad 2007-09-05 Upphävd 2011-11-01

PDF · 468 SEK

Standard · ASTM ASTM E1369 Standard Guide for Selecting Techniques for Treating Uncertainty and Risk in the Economic Evaluation of Buildings and Building Systems 1.1 This guide covers techniques for treating uncertainty in input values to an economic analysis of a building investment project. It also recommends techniques for evaluating the risk that a proj... Språk Publicerad 2007-06-11 Upphävd 2011-11-01

PDF · 611 SEK

Standard · ASTM ASTM E1438 Standard Guide for Measuring Widths of Interfaces in Sputter Depth Profiling Using SIMS 1.1 This guide provides the SIMS analyst with a method for determining the width of interfaces from SIMS sputtering data obtained from analyses of layered specimens. This guide does not apply to da... Språk Publicerad 2007-01-11 Upphävd 2011-11-01

PDF · 468 SEK

Standard · ASTM ASTM E1504 Standard Practice for Reporting Mass Spectral Data in Secondary Ion Mass Spectrometry (SIMS) 1.1 This practice provides the minimum information necessary to describe the instrumental, experimental, and data reduction procedures used in acquiring and reporting secondary ion mass spectrometr... Språk Publicerad 2007-01-11 Upphävd 2011-11-01

PDF · 468 SEK

Standard · ASTM ASTM E1571 Standard Practice for Electromagnetic Examination of Ferromagnetic Steel Wire Rope 1.1 This practice covers the application and standardization of instruments that use the electromagnetic, the magnetic flux, and the magnetic flux leakage examination method to detect flaws and cha... Språk Publicerad 2007-02-07 Upphävd 2011-12-01

PDF · 533 SEK

Standard · ASTM ASTM E1594 Standard Guide for Expression of Temperature 1.1 This guide covers uniform methods for expressing temperature, temperature values, and temperature differences.1.2 This guide is intended as a supplement to IEEE/ASTM SI-10. Språk Publicerad 2006-11-01 Upphävd 2011-11-01

PDF · 468 SEK

Standard · ASTM ASTM E1634 Standard Guide for Performing Sputter Crater Depth Measurements 1.1 This guide covers the preferred procedure for acquiring and post-processing of sputter crater depth measurements. This guide is limited to stylus-type surface profilometers equipped with a stag... Språk Publicerad 2007-09-05 Upphävd 2011-11-01

PDF · 468 SEK

Standard · ASTM ASTM E1634 Standard Guide for Performing Sputter Crater Depth Measurements 1.1 This guide covers the preferred procedure for acquiring and post-processing of sputter crater depth measurements. This guide is limited to stylus-type surface profilometers equipped with a stag... Språk Publicerad 2002-04-10 Upphävd 2011-11-01

PDF · 468 SEK

Standard · ASTM ASTM E1680 Standard Test Method for Rate of Air Leakage Through Exterior Metal Roof Panel Systems 1.1 This test method covers the determination of the resistance of exterior metal roof panel systems to air infiltration resulting from either positive or negative air pressure differences. The tes... Språk Publicerad 2003-04-10 Upphävd 2011-11-01

PDF · 533 SEK

Standard · ASTM ASTM E1767 Practice for Specifying the Geometries of Observation and Measurement to Characterize the Appearance of Materials 1.1 This practice describes the geometry of illuminating and viewing specimens and the corresponding geometry of optical measurements to characterize the appearance of materials. It establishes ter... Språk Publicerad 2004-05-01 Upphävd 2011-11-01

PDF · 533 SEK

Standard · ASTM ASTM E1823 Standard Terminology Relating to Fatigue and Fracture Testing 1.1 This terminology contains definitions, definitions of terms specific to certain standards, symbols, and abbreviations approved for use in standards on fatigue and fracture testing. The definit... Språk Publicerad 2009-07-01 Upphävd 2010-06-01

PDF · 767 SEK

Standard · ASTM ASTM E1823 Standard Terminology Relating to Fatigue and Fracture Testing 1.1 This terminology contains definitions, definitions of terms specific to certain standards, symbols, and abbreviations approved for use in standards on fatigue and fracture testing. The definit... Språk Publicerad 2010-09-17 Upphävd 2011-06-01

PDF · 767 SEK

Standard · ASTM ASTM E1915 Standard Test Methods for Analysis of Metal Bearing Ores and Related Materials for Carbon, Sulfur, and Acid-Base Characteristics 1.1 These test methods cover the determination of total carbon and sulfur and acid-base characteristics in metal bearing ores and related materials such as leach residues, tailings, and waste ro... Språk Publicerad 2009-12-01 Upphävd 2011-11-01

PDF · 767 SEK

• < Föregående
• 393
• 394
• 395
• 396
• 397
• 398
• 399
• 400
• 401
• 402
• Nästa >