21321 träffar på

Standard · ASTM ASTM D4 Standard Test Method for Bitumen Content 1.1 This test method covers the determination of bitumen content in materials containing at least 25 % bitumen. Bitumen content may usually be expeditiously and accurately determined by Procedure N... Språk Publicerad 2004-07-01

PDF · 468 SEK

Standard · ASTM ASTM D6006 Standard Guide for Assessing Biodegradability of Hydraulic Fluids 1.1 This guide covers and provides information to assist in planning a laboratory test or series of tests from which may be inferred information about the biodegradability of an unused fully formul... Språk Publicerad 2011-05-20

PDF · 533 SEK

Standard · ASTM ASTM G185 Standard Practice for Evaluating and Qualifying Oil Field and Refinery Corrosion Inhibitors Using the Rotating Cylinder Electrode 1.1 This practice covers a generally accepted procedure to use the rotating cylinder electrode (RCE) for evaluating corrosion inhibitors for oil field and refinery applications in Språk Publicerad 2006-01-15

PDF · 533 SEK

Standard · ASTM ASTM D6391 Standard Test Method for Field Measurement of Hydraulic Conductivity Using Borehole Infiltration 1.1 This test method covers field measurement of hydraulic conductivity (also referred to as coefficient of permeability) of porous materials using a cased borehole technique. When isotropic condit... Språk Publicerad 2012-02-24

PDF · 611 SEK

Standard · ASTM ASTM D2835 Standard Specification for Lubricant for Installation of Preformed Compression Seals in Concrete Pavements 1.1 This specification covers a lubricant suitable for facilitating the insertion and positioning of preformed elastomeric compression seals in prepared voids (usually contraction joints This speci... Språk Publicerad 2008-03-12

PDF · 468 SEK

Standard · ASTM ASTM F1759 Standard Practice for Design of High-Density Polyethylene (HDPE) Manholes for Subsurface Applications 1.1 This practice covers general and basic procedures related to the design of manholes and components manufactured from high-density polyethylene (HDPE) for use in subsurface applications and appl... Språk Publicerad 2004-09-01

PDF · 611 SEK

Standard · ASTM ASTM B696 Standard Specification for Coatings of Cadmium Mechanically Deposited 1.1 This specification covers the requirements for a coating of cadmium mechanically deposited on metal products. The coating is provided in various thicknesses up to and including 12 μm... Språk Publicerad 2004-10-01

PDF · 533 SEK

Standard · ASTM ASTM C1043 Standard Practice for Guarded-Hot-Plate Design Using Circular Line-Heat Sources 1.1 This practice covers the design of a circular line-heat-source guarded hot plate for use in accordance with Test Method C177. <p class="desc" id="N Språk Publicerad 2007-02-07

PDF · 611 SEK

Standard · ASTM ASTM C634 Standard Terminology Relating to Building and Environmental Acoustics 1.1 This terminology covers terms and definitions related to environmental acoustics. Only definitions common to two or more standards under the jurisdiction of Committee E33 are listed here. The ... Språk Publicerad 2012-02-24

PDF · 611 SEK

Standard · ASTM ASTM D3500 Standard Test Methods for Structural Panels in Tension 1.1 These test methods cover the determination of the tensile properties of structural panels. 1.2 Structural panels in use include plywood, waferboard, oriented strand board and composites of vene... Språk Publicerad 1990-10-26

PDF · 533 SEK

Standard · ASTM ASTM E131 Standard Terminology Relating to Molecular Spectroscopy 1.1 The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard. Språk Publicerad 2010-05-17

PDF · 533 SEK

Standard · ASTM ASTM A874/A874M Standard Specification for Ferritic Ductile Iron Castings Suitable for Low-Temperature Service 1.1 This specification covers ductile iron castings suitable for service at temperatures of −40°F [–40° This specification covers ductile iron castings s... Språk Publicerad 2004-10-01

PDF · 468 SEK

Standard · ASTM ASTM D6502 Standard Test Method for Measurement of On-line Integrated Samples of Low Level Suspended Solids and Ionic Solids in Process Water by X-Ray Fluores... 1.1 This test method covers the operation, calibration, and data interpretation for an on-line corrosion product (metals) monitoring system. The monitoring system is based on x-ray fluorescence (XR... Språk Publicerad 2010-05-01

PDF · 533 SEK

Standard · ASTM ASTM D6898 Standard Test Method for Evaluating Diesel Fuel Lubricity by an Injection Pump Rig 1.1 This test method covers evaluating the lubricity of diesel fuels using a pump rig test and Stanadyne Model DB4427-4782 pumps. Note 1—Other pumps may be used if a corre Språk Publicerad 2003-03-10

PDF · 533 SEK

Standard · ASTM ASTM C1397 Standard Practice for Application of Class PB Exterior Insulation and Finish Systems (EIFS) and EIFS with Drainage 1.1 This practice covers the minimum requirements and procedures for field or prefabricated application of Class PB Exterior Insulation and Finish Systems (EIFS) and EIFS with Drainage. Class PB ... Språk Publicerad 2009-07-15

PDF · 533 SEK

Standard · ASTM ASTM E493/E493M Standard Practice for Leaks Using the Mass Spectrometer Leak Detector in the Inside-Out Testing Mode 1.1 This practice covers procedures for testing devices that are sealed prior to testing, such as semiconductors, hermetically enclosed relays, pyrotechnic devices, etc., for leakage through the w... Språk Publicerad 2011-09-16

PDF · 468 SEK

Standard · ASTM ASTM D4080 Standard Specification for Trichloroethylene, Technical and Vapor-Degreasing Grade 1.1 This specification covers technical and vapor degreasing grade trichloroethylene. Note 1—Guide This specification covers technical and vapor degreasing grade trichloroethylene. Tech... Språk Publicerad 2006-01-01

PDF · 468 SEK

Standard · ASTM ASTM F2261 Standard Test Method for Pressure Rating Poly(Vinyl Chloride) (PVC) Plastic Pipe Fittings, Schedule 40 and 80 Socket-Type 1.1 This test method covers a procedure for establishing Pressure Rating for PVC schedule 40 and 80 socket-type fittings by evaluating fitting failure test data derived by testing water-filled asse... Språk Publicerad 2006-07-01

PDF · 468 SEK

Standard · ASTM ASTM D3299 Standard Specification for Filament-Wound Glass-Fiber-Reinforced Thermoset Resin Corrosion-Resistant Tanks 1.1 This specification covers cylindrical tanks fabricated by filament winding for above-ground vertical installation, to contain aggressive chemicals at atmospheric pressure as classified herein, ... Språk Publicerad 2010-09-17

PDF · 611 SEK

Standard · ASTM ASTM C1255 Standard Test Method for Analysis of Uranium and Thorium in Soils by Energy Dispersive X-Ray Fluorescence Spectroscopy 1.1 This test method covers the energy dispersive X-ray fluorescence (EDXRF) spectrochemical analysis of trace levels of uranium and thorium in soils. Any sample matrix that differs from the genera... Språk Publicerad 2011-08-25

PDF · 533 SEK

Standard · ASTM ASTM F2844 Standard Test Method for Displacement Compression of Softball and Baseball Bat Barrels 1.1 This test method describes a comparative measurement method for determining the compression force of softball and baseball bat barrels as defined by a static compression displacement test. 1.2 ... Språk Publicerad 2011-05-20

PDF · 468 SEK

Standard · ASTM ASTM D2274 Standard Test Method for Oxidation Stability of Distillate Fuel Oil (Accelerated Method) 1.1 This test method covers the measurement of the inherent stability of middle distillate petroleum fuels under specified oxidizing conditions at 95&#x00B0;C. <span class="small Språk Publicerad 2010-10-15

PDF · 533 SEK

Standard · ASTM ASTM F526 Standard Test Method for Measuring Dose for Use in Linear Accelerator Pulsed Radiation Effects Tests 1.1 This test method covers a calorimetric measurement of the total dose delivered in a single pulse of electrons from an electron linear accelerator or a flash X-ray machine (FXR, e-beam mode) use... Språk Publicerad 2011-05-20

PDF · 611 SEK

Standard · ASTM ASTM A48/A48M Standard Specification for Gray Iron Castings 1.1 This specification covers gray iron castings intended for general engineering use where tensile strength is a major consideration. Castings are classified on the basis of the tensile This speci... Språk Publicerad 2008-10-01

PDF · 533 SEK

Standard · ASTM ASTM E866 Standard Specification for Corrosion-Inhibiting Adhesive Primer for Aluminum Alloys to Be Adhesively Bonded in Honeycomb Shelter Panels 1.1 This specification covers sprayable, pigmented liquid primers for use on aluminum alloys that are to be adhesively bonded in the fabrication of honeycomb sandwich panels for tactical shelters. ... Språk Publicerad 2011-09-16

PDF · 533 SEK

Standard · ASTM ASTM B798 Standard Test Method for Porosity in Gold or Palladium Coatings on Metal Substrates by Gel-Bulk Electrography 1.1 This test method covers equipment and techniques for determining porosity in noble metal coatings, particularly electrodeposits and clad metals used on electrical contacts. 1.2 The test method ... Språk Publicerad 2009-10-01

PDF · 533 SEK

Standard · ASTM ASTM C928/C928M Standard Specification for Packaged, Dry, Rapid-Hardening Cementitious Materials for Concrete Repairs 1.1 This specification covers packaged, dry, cementitious mortar or concrete materials for rapid repairs to hardened hydraulic-cement concrete pavements and structures. Materials that contain orga... Språk Publicerad 2009-12-01

PDF · 533 SEK

Standard · ASTM ASTM D3865 Standard Test Method for Plutonium in Water 1.1 This test method covers the determination of alpha-particle-emitting isotopes of plutonium concentrations over 0.01 Bq/L (0.3 pCi/L) in water by means of chemical separations and alpha pulse-he... Språk Publicerad 2009-02-01

PDF · 533 SEK

Standard · ASTM ASTM B474 Standard Specification for Electric Fusion Welded Nickel and Nickel Alloy Pipe 1.1 This specification covers electric fusion welded pipe suitable for high-temperature or corrosive service as listed in Table 1. (Although no restrictions are placed on the sizes of pipe that m... Språk Publicerad 2009-10-01

PDF · 533 SEK

Standard · ASTM ASTM D2257 Standard Test Method for Extractable Matter in Textiles 1.1 This test method covers a procedure for determining the extractable material on most fibers, yarns, and fabrics. Three options are included. Option 1 uses heat and Soxhlet extraction apparatus.... Språk Publicerad 2012-02-01

PDF · 533 SEK

• < Föregående
• 694
• 695
• 696
• 697
• 698
• 699
• 700
• 701
• 702
• 703
• Nästa >