21321 träffar på

ASTM D6388
Standard · ASTM ASTM D6388

Standard Practice for Tests to Evaluate the Chemical Resistance of Geonets to Liquids

1.1 This practice describes procedures for testing geonet products for chemical resistance with liquid wastes, prepared chemical solutions, or leachates, or both, derived from soli

Språk

Publicerad

2005-06-01
PDF · 468 SEK
ASTM B605
Standard · ASTM ASTM B605

Standard Specification for Electrodeposited Coatings of Tin-Nickel Alloy

1.1 This specification covers the requirements for electrodeposited tin-nickel alloy coatings from aqueous solutions intended for the corrosion protection of fabricated articles of iron, steel, zi...

Språk

Publicerad

2004-04-01
PDF · 533 SEK
ASTM B502
Standard · ASTM ASTM B502

Standard Specification for Aluminum-Clad Steel Core Wire for Use in Overhead Electrical Aluminum Conductors

1.1 This specification covers round, aluminum-clad steel core wire with two designations of tensile strengths, AW2 (Normal Strength) and AW3 (High Strength). 1.2 The values stated in either SI unit...

Språk

Publicerad

2011-03-18
PDF · 468 SEK
ASTM D7377
Standard · ASTM ASTM D7377

Standard Practice for Evaluating the Water Wash-Off Resistance of Traffic Paints using a Water Faucet

1.1 A traffic paint film freshly applied to a roadway, air strip, or parking lot may be exposed to rain of varying intensities shortly after application. This practice was designed to det...

Språk

Publicerad

2009-06-01
PDF · 468 SEK
ASTM C285
Standard · ASTM ASTM C285

Standard Test Methods for Sieve Analysis of Wet-Milled and Dry-Milled Porcelain Enamel

1.1 These test methods cover the determination of the fineness of frit in wet- or dry-milled porcelain enamels and other ceramic coatings for metals by means of the No. 200 (75-μm) or No...

Språk

Publicerad

2010-06-18
PDF · 468 SEK
ASTM F1816
Standard · ASTM ASTM F1816

Standard Safety Specification for Drawstrings on Children's Upper Outerwear

1.1 This specification covers and is intended to reduce strangulation and vehicular dragging hazards associated with drawstrings on children's upper outerwear. 1.2 The type of clothing covered by t...

Språk

Publicerad

2009-10-01
PDF · 468 SEK
ASTM C1097
Standard · ASTM ASTM C1097

Standard Specification for Hydrated Lime for Use in Asphalt Cement or Bituminous Pavements

1.1 This specification covers high calcium, dolomitic and magnesian-hydrated lime for use in asphalt cement or bituminous pavement. This specification covers high calcium, dolomitic and ...

Språk

Publicerad

2007-09-05
PDF · 468 SEK
ASTM D4148
Standard · ASTM ASTM D4148

Standard Test Method for Analysis of Phytoplankton in Surface Water by the Sedgwick-Rafter Method

1.1 This test method covers determining the density and taxonomic classification of phytoplankton. It is applicable both to relatively sparse or dense phytoplankton concentrations,

Språk

Publicerad

2004-04-01
PDF · 468 SEK
ASTM A673/A673M
Standard · ASTM ASTM A673/A673M

Standard Specification for Sampling Procedure for Impact Testing of Structural Steel

1.1 This specification covers the procedure for longitudinal Charpy V-notch testing of structural steel and contains two frequencies of testing. The impact properties of steel can vary within the ...

Språk

Publicerad

2007-05-09
PDF · 533 SEK
ASTM F2103
Standard · ASTM ASTM F2103

Standard Guide for Characterization and Testing of Chitosan Salts as Starting Materials Intended for Use in Biomedical and Tissue-Engineered Medica...

1.1 This guide covers the evaluation of chitosan salts suitable for use in biomedical or pharmaceutical applications, or both, including, but not limited to, tissue-engineered medical products (TEM...

Språk

Publicerad

2011-05-20
PDF · 533 SEK
ASTM F1885
Standard · ASTM ASTM F1885

Standard Guide for Irradiation of Dried Spices, Herbs, and Vegetable Seasonings to Control Pathogens and Other Microorganisms

1.1 This guide covers procedures for irradiation of dried spices, herbs, and vegetable seasonings for microbiological control. Generally, these items have moisture content of 4.5 to 12 % and are ...

Språk

Publicerad

2004-01-01
PDF · 533 SEK
ASTM E290
Standard · ASTM ASTM E290

Standard Test Methods for Bend Testing of Material for Ductility

1.1 These test methods cover bend testing for ductility of materials. Included in the procedures are four conditions of constraint on the bent portion of the specimen; a guided-bend test using a ma...

Språk

Publicerad

2009-04-01
PDF · 533 SEK
ASTM C1517
Standard · ASTM ASTM C1517

Standard Test Method for Determination of Metallic Impurities in Uranium Metal or Compounds by DC-Arc Emission Spectroscopy

1.1 This test method describes the steps necessary for the preparation and determination of impurity metals in uranium metal and uranium compounds by DC arc emission spectroscopy. 1.2 The method is...

Språk

Publicerad

2009-06-01
PDF · 468 SEK
ASTM C366/C366M
Standard · ASTM ASTM C366/C366M

Standard Test Methods for Measurement of Thickness of Sandwich Cores

1.1 These test methods cover plant manufacturing procedures for measuring the thickness of flat sandwich cores. Permissible core material forms include those with continuous bonding surfaces (such ...

Språk

Publicerad

2011-06-17
PDF · 533 SEK
ASTM E1677
Standard · ASTM ASTM E1677

Standard Specification for Air Barrier (AB) Material or System for Low-Rise Framed Building Walls

1.1 This specification covers minimum performances and specification criteria for an air barrier (AB) material or system for framed walls of low-rise buildings. The intended users are purchasers o...

Språk

Publicerad

2011-12-16
PDF · 533 SEK
ASTM E2034
Standard · ASTM ASTM E2034

Standard Practices for Simulating Truck Response to Longitudinal Profiles of Vehicular Traveled Surfaces

1.1 These practices cover the calculation of truck response to longitudinal profiles of traveled surface roughness. 1.2 These practices utilize computer stimulations to obtain two truck responses i...

Språk

Publicerad

2003-12-01
PDF · 533 SEK
ASTM B823
Standard · ASTM ASTM B823

Standard Specification for Materials for Copper Base Powder Metallurgy (PM) Structural Parts

1.1 This specification covers a variety of copper base powder metallurgy (PM) structural materials, including those used in applications where high electrical conductivity is required. It includ...

Språk

Publicerad

2009-10-01
PDF · 533 SEK
ASTM F2735
Standard · ASTM ASTM F2735

Standard Specification for Plastic Insert Fittings For SDR9 Cross-linked Polyethylene (PEX) and Polyethylene of Raised Temperature (PE-RT) Tubing

1.1 This specification establishes requirements for sulfone plastic insert fittings and copper crimp rings for three sizes (½, ¾, and 1) of cross-linked polyethyl

Språk

Publicerad

2009-12-01
PDF · 533 SEK
ASTM D4007
Standard · ASTM ASTM D4007

Standard Test Method for Water and Sediment in Crude Oil by the Centrifuge Method (Laboratory Procedure)

1.1 This test method describes the laboratory determination of water and sediment in crude oils by means of the centrifuge procedure. This centrifuge method for determining water and sediment in cr...

Språk

Publicerad

2011-09-16
PDF · 611 SEK
ASTM D1537
Standard · ASTM ASTM D1537

Standard Specification for Distilled Soybean Fatty Acids (Withdrawn 2007)

1.1 This specification covers distilled acids derived from the distillation of soybean oil. Three types are covered, as follows: 1.1.1 Type I -Usually produced from degummed soybean oil and refe...

Språk

Publicerad

1998-05-10

Upphävd

2007-03-20
PDF · 468 SEK
ASTM F2181
Standard · ASTM ASTM F2181

Standard Specification for Wrought Seamless Stainless Steel Tubing for Surgical Implants

1.1 This specification covers the requirements for five compositions of wrought seamless stainless steel tubing for the manufacture of surgical implants. Material shall conform to the applicable re...

Språk

Publicerad

2009-02-01
PDF · 533 SEK
ASTM F1223
Standard · ASTM ASTM F1223

Standard Test Method for Determination of Total Knee Replacement Constraint

1.1 This test method covers the establishment of a database of total knee replacement (TKR) motion characteristics with the intent of developing guidelines for the assignment of co

Språk

Publicerad

2008-10-08
PDF · 533 SEK
ASTM D3833/D3833M
Standard · ASTM ASTM D3833/D3833M

Standard Test Method for Water Vapor Transmission of Pressure-Sensitive Tapes

1.1 This test method covers one procedure for measuring the water vapor transmission rate of pressure-sensitive tape. 1.2 The values stated in either SI or inch-pound units are to be regarded separ...

Språk

Publicerad

2006-04-01
PDF · 468 SEK
ASTM C901
Standard · ASTM ASTM C901

Standard Specification for Prefabricated Masonry Panels

1.1 This specification covers the structural design and quality control of fabrication for load-bearing and non-load-bearing prefabricated masonry panels. Methods of prefabrication, field erection...

Språk

Publicerad

2011-04-15
PDF · 468 SEK
ASTM D4614
Standard · ASTM ASTM D4614

Standard Specification for Ethyl Acetate (All Grades)

1.1 This specification covers the various grades of ethyl acetate suitable for use as solvents in paint and related coatings. 1.2 The values stated in SI units are to be regarded as standard. No ...

Språk

Publicerad

2011-12-16
PDF · 468 SEK
ASTM D3654/D3654M
Standard · ASTM ASTM D3654/D3654M

Standard Test Methods for Shear Adhesion of Pressure-Sensitive Tapes

1.1 This test method covers procedures for determining the ability of pressure-sensitive tapes and labels to remain adhered under constant load applied parallel to the surface of the tape and subst...

Språk

Publicerad

2006-04-01
PDF · 533 SEK
ASTM C1279
Standard · ASTM ASTM C1279

Standard Test Method for Non-Destructive Photoelastic Measurement of Edge and Surface Stresses in Annealed, Heat-Strengthened, and Fully Tempered F...

1.1 This test method covers the determination of edge stresses and surface stresses in annealed, heat-strengthened, and fully tempered flat glass products. 1.2 This test method is non-destructive....

Språk

Publicerad

2009-10-01
PDF · 533 SEK
ASTM B78
Standard · ASTM ASTM B78

Standard Test Method of Accelerated Life of Iron-Chromium-Aluminum Alloys for Electrical Heating

1.1 This test method covers the determination of the resistance to oxidation of iron-chromium-aluminum electrical heating alloys at elevated temperatures under intermittent heating

Språk

Publicerad

2007-09-05
PDF · 533 SEK
ASTM A854/A854M
Standard · ASTM ASTM A854/A854M

Standard Specification for Metallic-Coated Steel Smooth High-Tensile Fence and Trellis Wire

1.1 This specification covers 12 1/2-gage (0.099-in.) [2.5- mm] Class 3 metallic-coated steel wire suitable for use in parallel–wire fence, trellis, an This specification cove...

Språk

Publicerad

2008-05-01
PDF · 468 SEK
ASTM C895
Standard · ASTM ASTM C895

Standard Test Method for Lead and Cadmium Extracted from Glazed Ceramic Tile

1.1 This test method covers the precise determination of lead and cadmium extracted by acetic acid from glazed ceramic tile that are intended for use in areas of food preparation. The procedure of ...

Språk

Publicerad

2003-10-01
PDF · 468 SEK
Förfina din sökning genom att visa:
...som handlar om:

Ämnesområden (0)

Avbryt

Branscher (0)

Avbryt

Syfte (0)

Avbryt

Material (0)

Avbryt
Visa varukorgen Fortsätt handla 0
Varukorgen Stäng
Annonstext