21289 träffar på

Standard · ASTM ASTM D4511 Standard Test Method for Hydraulic Conductivity of Essentially Saturated Peat 1.1 This test method covers the determination of the hydraulic conductivity (permeability) of essentially saturated, intact cylindrical specimens of peat when the hydraulic conductivity is greater ... Språk Publicerad 2006-02-01 Upphävd 2011-11-01

PDF · 533 SEK

Standard · ASTM ASTM D4561 Standard Practice for Quality Control Systems for Organizations Producing and Applying Bituminous Paving Materials 1.1 This practice prescribes the general requirements for the establishment and maintenance of a quality control system for organizations producing or applying bituminous paving materials, or both,... Språk Publicerad 2007-01-11 Upphävd 2011-12-01

PDF · 468 SEK

Standard · ASTM ASTM D4595 Standard Test Method for Tensile Properties of Geotextiles by the Wide-Width Strip Method 1.1 This test method covers the measurement of tensile properties of geotextiles using a wide-width strip specimen tensile method. This test method is applicable to most geotextiles that include wo... Språk Publicerad 2009-01-15 Upphävd 2011-10-01

PDF · 611 SEK

Standard · ASTM ASTM D4637/D4637M Standard Specification for EPDM Sheet Used In Single-Ply Roof Membrane 1.1 This specification covers flexible sheet made from ethylene-propylene-diene terpolymer (EPDM) intended for use in single-ply roofing membranes exposed to the weather. The tests and property lim... Språk Publicerad 2010-05-01 Upphävd 2012-01-01

PDF · 533 SEK

Standard · ASTM ASTM D4678 Standard Practice for Rubber-Preparation, Testing, Acceptance, Documentation, and Use of Reference Materials 1.1 This practice covers materials used on an industry-wide basis as reference materials, which are vitally important to conduct product, specification, and development testing in the rubber and ca... Språk Publicerad 2004-12-01 Upphävd 2011-11-01

PDF · 767 SEK

Standard · ASTM ASTM D4754 Standard Test Method for Two-Sided Liquid Extraction of Plastic Materials Using FDA Migration Cell 1.1 This test method covers the use of the FDA migration cell in the extraction of components and permits quantitation of individual migrants from plastic materials by suitable extracting liquids, ... Språk Publicerad 2003-03-10 Upphävd 2011-12-01

PDF · 533 SEK

Standard · ASTM ASTM D4812 Standard Test Method for Unnotched Cantilever Beam Impact Resistance of Plastics 1.1 This test method covers the determination of the resistance of plastics to breakage by flexural shock, as indicated by the energy extracted from standardized pendulum-type hammers, mounted in s... Språk Publicerad 2006-03-15 Upphävd 2011-12-01

PDF · 611 SEK

Standard · ASTM ASTM D4829 Standard Test Method for Expansion Index of Soils 1.1 This test method allows for determination of expansion potential of compacted soils when inundated with distilled water. 1.2 This test method provides a simple yet sensitive method for determi... Språk Publicerad 2008-12-01 Upphävd 2011-11-01

PDF · 533 SEK

Standard · ASTM ASTM D4871 Standard Guide for Universal Oxidation/Thermal Stability Test Apparatus 1.1 This guide covers an apparatus used to measure the oxidation or thermal stability of liquids by subjecting them to temperatures in the range from 50 to 375°C in the presence of air, ox... Språk Publicerad 2006-05-01 Upphävd 2011-12-01

PDF · 468 SEK

Standard · ASTM ASTM D4944 Standard Test Method for Field Determination of Water (Moisture) Content of Soil by the Calcium Carbide Gas Pressure Tester 1.1 This test method outlines procedures for determining the water (moisture) content of soil by chemical reaction using calcium carbide as a reagent to react with the available water in the soil p... Språk Publicerad 2004-07-01 Upphävd 2011-11-01

PDF · 533 SEK

Standard · ASTM ASTM D5025 Standard Specification for Laboratory Burner Used for Small-Scale Burning Tests on Plastic Materials 1.1 This specification covers the physical dimensions and characteristics of a laboratory burner to be used as an ignition source for small-scale burning tests on plastic materials. The burner is u... Språk Publicerad 2005-04-01 Upphävd 2011-12-01

PDF · 468 SEK

Standard · ASTM ASTM D5311 Standard Test Method for Load Controlled Cyclic Triaxial Strength of Soil 1.1 This test method covers the determination of the cyclic strength (sometimes called the liquefaction potential) of saturated soils in either undisturbed or reconstituted states by the load-contr... Språk Publicerad 1992-10-15 Upphävd 2011-11-01

PDF · 533 SEK

Standard · ASTM ASTM D5337 Standard Practice for Flow Rate for Calibration of Personal Sampling Pumps 1.1 This practice describes the calibration of sampling pumps commonly used for monitoring personal airborne exposures in the work-place.1.2 This practice includes procedures for describing primary... Språk Publicerad 2004-12-01 Upphävd 2011-11-15

PDF · 468 SEK

Standard · ASTM ASTM D5448/D5448M Standard Test Method for Inplane Shear Properties of Hoop Wound Polymer Matrix Composite Cylinders 1.1 This test method determines the inplane shear properties of wound polymer matrix composites reinforced by high-modulus continuous fibers. It describes testing of hoop wound (90&#176) cylind... Språk Publicerad 2006-01-15 Upphävd 2011-11-15

PDF · 611 SEK

Standard · ASTM ASTM D5449/D5449M Standard Test Method for Transverse Compressive Properties of Hoop Wound Polymer Matrix Composite Cylinders 1.1 This test method determines the transverse compressive properties of wound polymer matrix composites reinforced by high-modulus continuous fibers. It describes testing of hoop wound (90) cylind... Språk Publicerad 2006-01-15 Upphävd 2011-11-15

PDF · 533 SEK

Standard · ASTM ASTM D5450/D5450M Standard Test Method for Transverse Tensile Properties of Hoop Wound Polymer Matrix Composite Cylinders 1.1 This test method determines the transverse tensile properties of wound polymer matrix composites reinforced by high-modulus continuous fibers. It describes testing of hoop wound (90&#176) c... Språk Publicerad 2006-01-15 Upphävd 2011-11-15

PDF · 533 SEK

Standard · ASTM ASTM D5520 Standard Test Method for Laboratory Determination of Creep Properties of Frozen Soil Samples by Uniaxial Compression 1.1 This test method covers the determination of the creep behavior of cylindrical specimens of frozen soil, subjected to uniaxial compression. It specifies the apparatus, instrumentation, and proc... Språk Publicerad 2006-05-01 Upphävd 2011-11-01

PDF · 533 SEK

Standard · ASTM ASTM D5757 Standard Test Method for Determination of Attrition and Abrasion of Powdered Catalysts by Air Jets 1.1 This test method covers the determination of the relative attrition characteristics of powdered catalysts by means of air jet attrition. It is applicable to spherically or irregularly shaped pa... Språk Publicerad 2007-01-11 Upphävd 2011-11-15

PDF · 468 SEK

Standard · ASTM ASTM D5865 Standard Test Method for Gross Calorific Value of Coal and Coke 1.1 This test method pertains to the determination of the gross calorific value of coal and coke by either an isoperibol or adiabatic bomb calorimeter. 1.2 The values stated in SI units are to b... Språk Publicerad 2010-09-17 Upphävd 2011-11-01

PDF · 611 SEK

Standard · ASTM ASTM D5865 Standard Test Method for Gross Calorific Value of Coal and Coke 1.1 This test method pertains to the determination of the gross calorific value of coal and coke by either an isoperibol or adiabatic bomb calorimeter. 1.2 The values stated in SI units are to be r... Språk Publicerad 2008-03-12 Upphävd 2010-05-01

PDF · 611 SEK

Standard · ASTM ASTM D5865 Standard Test Method for Gross Calorific Value of Coal and Coke 1.1 This test method pertains to the determination of the gross calorific value of coal and coke by either an isoperibol or adiabatic bomb calorimeter. 1.2 The values stated in SI units are to be r... Språk Publicerad 2007-09-05 Upphävd 2007-07-15

PDF · 611 SEK

Standard · ASTM ASTM D5890 Standard Test Method for Swell Index of Clay Mineral Component of Geosynthetic Clay Liners - Språk Publicerad 2006-01-01 Upphävd 2011-10-01

PDF · 468 SEK

Standard · ASTM ASTM D5947 Standard Test Methods for Physical Dimensions of Solid Plastics Specimens 1.1 These test methods cover determination of the physical dimensions of solid plastic specimens where the dimensions are used directly in determining the results of tests for various properties. U... Språk Publicerad 2006-04-01 Upphävd 2011-12-15

PDF · 533 SEK

Standard · ASTM ASTM D6039/D6039M Standard Specification for Open and Covered Wood Crates 1.1 This specification covers five types and two styles of open and one type, and one style of covered wood crates designed for net loads not exceeding 4000 lb [1814 kg]. Open crates are suitable f... Språk Publicerad 2008-10-01 Upphävd 2011-11-01

PDF · 767 SEK

Standard · ASTM ASTM D6063 Standard Guide for Sampling of Drums and Similar Containers by Field Personnel 1.1 This guide covers information, including flow charts, for field personnel to follow in order to collect samples from drums and similar containers.1.2 The purpose of this guide is to help field ... Språk Publicerad 2007-01-11 Upphävd 2011-11-15

PDF · 611 SEK

Standard · ASTM ASTM D6066 Standard Practice for Determining the Normalized Penetration Resistance of Sands for Evaluation of Liquefaction Potential 1.1 This practice outlines a procedure to obtain a record of normalized resistance of sands to the penetration of a standard sampler driven by a standard energy for estimating soil liquefaction pot... Språk Publicerad 2004-11-01 Upphävd 2011-12-01

PDF · 611 SEK

Standard · ASTM ASTM D6130 Standard Test Method for Determination of Silicon and Other Elements in Engine Coolant by Inductively Coupled Plasma-Atomic Emission Spectroscopy 1.1 This test method covers the determination of silicon in engine coolant by inductively coupled plasma-atomic emission spectroscopy (ICP-AES). Silicon can be determined as low as the range of 5 p... Språk Publicerad 2009-11-01 Upphävd 2011-11-01

PDF · 468 SEK

Standard · ASTM ASTM D6324 Standard Test Methods for Male Condoms Made from Polyurethane 1.1 These test methods cover and shall be used to evaluate male condoms made only of polyurethane. These test methods also describe the minimum inspection and quality levels that shall be utilized ... Språk Publicerad 2005-12-15 Upphävd 2011-11-01

PDF · 533 SEK

Standard · ASTM ASTM D6358 Standard Classification System for Poly (Phenylene Sulfide) Injection Molding and Extrusion Materials Using ISO Methods 1.1 This classification system covers unfilled, reinforced and filled materials suitable for injection molding and extrusion using ISO methods. The system allows for the use of poly(phenylene sulfi... Språk Publicerad 2006-03-15 Upphävd 2011-12-01

PDF · 533 SEK

Standard · ASTM ASTM D6391 Standard Test Method for Field Measurement of Hydraulic Conductivity Limits of Porous Materials Using Two Stages of Infiltration from a Borehole 1.1 This test method covers field measurement of limiting values for vertical and horizontal hydraulic conductivities (also referred to as coefficients of permeability) of porous materials using th... Språk Publicerad 2006-02-01 Upphävd 2011-11-01

PDF · 611 SEK

• < Föregående
• 387
• 388
• 389
• 390
• 391
• 392
• 393
• 394
• 395
• 396
• Nästa >