21297 träffar på

ASTM D4126
Standard · ASTM ASTM D4126

Standard Specification for Vapor-Degreasing Grade and General Solvent Grade 1,1,1-Trichloroethane

1.1 This specification covers vapor-degreasing grade and general solvent grade 1,1,1-trichloroethane. High purity grades of 1,1,1-trichloroethane are available but should not be evaluated by this s...

Språk

Publicerad

2007-05-09
PDF · 468 SEK
ASTM D2860/D2860M
Standard · ASTM ASTM D2860/D2860M

Standard Test Method for Adhesion of Pressure-Sensitive Tape to Fiberboard at 90 Angle and Constant Stress

1.1 This test method covers the determination of the property of adhesion of pressure-sensitive tape to a fiber-board surface. The user of this test method has the option of choosing the paper sur...

Språk

Publicerad

2004-10-01
PDF · 533 SEK
ASTM A968/A968M
Standard · ASTM ASTM A968/A968M

Standard Specification for Chromium, Chromium-Nickel, and Silicon Alloy Steel Bars and Shapes for Corrosion and Heat-Resisting Service

1.1 This specification covers hot- and cold-finished alloy steel bars having a chromium content equal to or less than 11.0 % including rounds, squares, hexagons, and hot-rolled or extruded shapes f...

Språk

Publicerad

1996-09-10
PDF · 468 SEK
ASTM C860
Standard · ASTM ASTM C860

Standard Test Method for Determining the Consistency of Refractory Castable Using the Ball-In-Hand Test

1.1 This test method covers the procedures for determining the consistency of a castable using the Ball-in-Hand Test. The amount of water used in a castable has a significant influence on its perfo...

Språk

Publicerad

2011-05-20
PDF · 468 SEK
ASTM C969
Standard · ASTM ASTM C969

Standard Practice for Infiltration and Exfiltration Acceptance Testing of Installed Precast Concrete Pipe Sewer Lines

1.1 This practice covers procedures for testing installed precast concrete pipe sewer lines using either water infiltration or exfiltration acceptance limits to demonstrate the integrity of the ins...

Språk

Publicerad

2002-08-10
PDF · 468 SEK
ASTM D6710
Standard · ASTM ASTM D6710

Standard Guide for Evaluation of Hydrocarbon-Based Quench Oil

1.1 This guide covers information without specific limits, for selecting standard test methods for testing hydrocarbon-based quench oils for quality and aging. 1.2 This standard does not purport to a

Språk

Publicerad

2007-09-05
PDF · 533 SEK
ASTM E1636
Standard · ASTM ASTM E1636

Standard Practice for Analytically Describing Depth-Profile and Linescan-Profile Data by an Extended Logistic Function

1.1 This practice describes a systematic method for analyzing depth-profile and linescan data and for accurately characterizing the shape of an interface region or topographic feature. The profi...

Språk

Publicerad

2011-05-20
PDF · 533 SEK
ASTM D4576
Standard · ASTM ASTM D4576

Standard Test Method for Mold Growth Resistance of Wet Blue

1.1 This test method covers the determination of mold growth resistance of wet blue and wet white subject to storage and shipping requirements and intended for use in leather manuf

Språk

Publicerad

2008-12-03
PDF · 468 SEK
ASTM F1070
Standard · ASTM ASTM F1070

Standard Specification for Doors, Non-Tight, for Marine Use

1.1 This specification to be used in conjunction with Specification F1073, co This specification covers the dimensional and mechanical requirements as well as the construction of steel, aluminum, a...

Språk

Publicerad

2004-11-01
PDF · 533 SEK
ASTM B934
Standard · ASTM ASTM B934

Standard Test Method for Effective Case Depth of Ferrous Powder Metallurgy (P/M) Parts Using Microindentation Hardness Measurements

1.1 This test method covers a procedure for determination of the effective case depth of powder metallurgy (PM) parts. 1.2 A microindentation hardness traverse procedure is described to determine e...

Språk

Publicerad

2011-05-20
PDF · 533 SEK
ASTM D6388
Standard · ASTM ASTM D6388

Standard Practice for Tests to Evaluate the Chemical Resistance of Geonets to Liquids

1.1 This practice describes procedures for testing geonet products for chemical resistance with liquid wastes, prepared chemical solutions, or leachates, or both, derived from soli

Språk

Publicerad

2005-06-01
PDF · 468 SEK
ASTM F1175
Standard · ASTM ASTM F1175

Standard Practice for Using the Computer Impact Print-Out Unit as a Test Instrument for Manifold Comparison

1.1 This practice covers a standardized procedure utilizing the computer impact print-out unit as an imaging device where the performance properties of carbonless paper, carbon paper, and similar i...

Språk

Publicerad

2006-06-01
PDF · 468 SEK
ASTM F846
Standard · ASTM ASTM F846

Standard Guide for Testing Performance of Amusement Rides and Devices

1.1 This guide covers the basic tests which shall be conducted on amusement rides and devices during prototype development, installation or erection, following major modifications, and during norma...

Språk

Publicerad

2003-10-01
PDF · 468 SEK
ASTM G173
Standard · ASTM ASTM G173

Standard Tables for Reference Solar Spectral Irradiances: Direct Normal and Hemispherical on 37° Tilted Surface

1.1 These tables contain terrestrial solar spectral irradiance distributions for use in terrestrial applications that require a standard reference spectral irradiance for hemispher

Språk

Publicerad

2003-01-10
PDF · 611 SEK
ASTM D3521
Standard · ASTM ASTM D3521

Standard Test Method for Surface Wax Coating On Corrugated Board

1.1 This test method covers determination of the weight of wax that is present as a coating on the surface of corrugated board. This method is applicable to board to which wax has

Språk

Publicerad

2007-09-05
PDF · 468 SEK
ASTM C1208/C1208M
Standard · ASTM ASTM C1208/C1208M

Standard Specification for Vitrified Clay Pipe and Joints for Use in Microtunneling, Sliplining, Pipe Bursting, and Tunnels

1.1 This specification establishes the criteria for the manufacture, quality assurance testing, inspection, installation, field acceptance testing, and product marking of vitrified clay pipe to b...

Språk

Publicerad

2011-05-20
PDF · 533 SEK
ASTM C884/C884M
Standard · ASTM ASTM C884/C884M

Standard Test Method for Thermal Compatibility Between Concrete and an Epoxy-Resin Overlay

1.1 This test method covers the determination of which epoxy-resin formulations are subject to debonding when used as overlays for concrete when the combination of the two is subjected to temperatu...

Språk

Publicerad

2005-11-01
PDF · 468 SEK
ASTM D5973
Standard · ASTM ASTM D5973

Standard Specification for Elastomeric Strip Seals with Steel Locking Edge Rails Used in Expansion Joint Sealing

1.1 This specification covers the material requirements for preformed elastomeric strip seals and the corresponding steel locking edge rail used in expansion joint sealing. The scope of This specif...

Språk

Publicerad

2008-02-06
PDF · 468 SEK
ASTM D1538
Standard · ASTM ASTM D1538

Standard Specification for Distilled Linseed Fatty Acids (Withdrawn 2007)

1.1 This specification covers distilled acids derived from the distillation of linseed oil. Two types are covered as follows: 1.1.1 Type I -Usually produced from degummed linseed oil and referre...

Språk

Publicerad

1998-05-10

Upphävd

2007-03-20
PDF · 468 SEK
ASTM E523
Standard · ASTM ASTM E523

Standard Test Method for Measuring Fast-Neutron Reaction Rates by Radioactivation of Copper

1.1 This test method covers procedures for measuring reaction rates by the activation reaction 63Cu(n,α)60Co. The cross section for 60Co produced in this reaction increa

Språk

Publicerad

2011-09-16
PDF · 468 SEK
ASTM D6620
Standard · ASTM ASTM D6620

Standard Practice for Asbestos Detection Limit Based on Counts

1.1 This practice presents the procedure for determining the detection limit (DL) for measurements of fibers or structures using microscopy methods. 1.2 This practice applies to samples of air th...

Språk

Publicerad

2007-01-11
PDF · 611 SEK
ASTM E1673
Standard · ASTM ASTM E1673

Standard Test Method for Percent Suspensibility

1.1 This test method is used to determine the percent suspensibility of dry pesticide formulations. 1.

Språk

Publicerad

2001-01-01
PDF · 468 SEK
ASTM F1932
Standard · ASTM ASTM F1932

Standard Test Method for Measuring Sleeping Bag Loft

1.1 This test method covers the determination of the loft of a sleeping bag under a standardized load. 1.2 The test method uses a physical height measurement applicable in the laboratory. 1.3 The v...

Språk

Publicerad

2004-05-01
PDF · 468 SEK
ASTM D4561
Standard · ASTM ASTM D4561

Standard Practice for Quality Control Systems for Organizations Producing and Applying Bituminous Paving Materials

1.1 This practice prescribes the general requirements for the establishment and maintenance of a quality control system for organizations producing or applying bituminous paving materials, or both,...

Språk

Publicerad

2012-02-24
PDF · 468 SEK
ASTM C141/C141M
Standard · ASTM ASTM C141/C141M

Standard Specification for Hydrated Hydraulic Lime for Structural Purposes

1.1 This specification covers hydrated hydraulic lime for structural purposes. 1.2 Hydrated hydraulic lime may be used in the scratch or brown coat of plaster, stucco, mortar, or in portland-cement...

Språk

Publicerad

2009-10-01
PDF · 468 SEK
ASTM D6654
Standard · ASTM ASTM D6654

Standard Test Method for Basic Storage Stability of a Mechanical Pump Dispenser

1.1 This test method covers the determination of the basic storage stability of a mechanical pump dispenser with a product. 1.2 This test method covers an evaluation of the weight lost during stor...

Språk

Publicerad

2005-10-01
PDF · 468 SEK
ASTM D3466
Standard · ASTM ASTM D3466

Standard Test Method for Ignition Temperature of Granular Activated Carbon

1.1 This test method covers the determination of reference ignition temperature of granular activated carbon in flowing air. This test method provides a basis for comparing the ignition characteris...

Språk

Publicerad

2006-04-01
PDF · 468 SEK
ASTM D7353
Standard · ASTM ASTM D7353

Standard Practice for Sampling of Liquids in Waste Management Activities Using a Peristaltic Pump

1.1 This practice covers the use of a peristaltic pump for sampling liquids from multiple depths. It is applicable for a wide range of fluids including: high-viscosity fluids, agg

Språk

Publicerad

2007-09-05
PDF · 468 SEK
ASTM C1459
Standard · ASTM ASTM C1459

Standard Specification for Performance of Non-Asbestos Fiber-Reinforced Cement Shake, Shingle, and Slate Roofing Systems

1.1 This specification covers the performance of non-asbestos, fiber-reinforced cement shake, shingle, and slate roofing systems that are of uniform or nonuniform thickness and texture. 1.2 This sp...

Språk

Publicerad

2009-11-01
PDF · 468 SEK
ASTM F1042
Standard · ASTM ASTM F1042

Standard Practice for Estimating Toner and Dispersant Usage in Copiers Utilizing Liquid Developers

1.1 This practice describes a procedure for estimating the number of copies that can be produced for a given unit of toner, and a given unit of dispersant in a copier utilizing liquid developer. 1....

Språk

Publicerad

2009-10-01
PDF · 468 SEK
Förfina din sökning genom att visa:
...som handlar om:

Ämnesområden (0)

Avbryt

Branscher (0)

Avbryt

Syfte (0)

Avbryt

Material (0)

Avbryt
Visa varukorgen Fortsätt handla 0
Varukorgen Stäng
Annonstext