21321 träffar på

ASTM D6764
Standard · ASTM ASTM D6764

Standard Guide for Collection of Water Temperature, Dissolved-Oxygen Concentrations, Specific Electrical Conductance, and pH Data from Open Channels

1.1&#x00a0;This guide describes procedures to collect cross-sectional means of temperature, dissolved oxygen, specific electrical conductance, and pH of water flowing in open channels.</

Språk

Publicerad

2007-09-05
PDF · 611 SEK
ASTM A500/A500M
Standard · ASTM ASTM A500/A500M

Standard Specification for Cold-Formed Welded and Seamless Carbon Steel Structural Tubing in Rounds and Shapes

1.1 This specification covers cold-formed welded and seamless carbon steel round, square, rectangular, or special shape structural tubing for welded, riveted, or bolted construction of bridges and...

Språk

Publicerad

2010-05-17
PDF · 533 SEK
ASTM G58
Standard · ASTM ASTM G58

Standard Practice for Preparation of Stress-Corrosion Test Specimens for Weldments

. 1.1 This practice covers procedures for the making and utilization of test specimens for the evaluation of weldments in stress-corrosion cracking (SCC) environments. 1.2 Test specimens are descr...

Språk

Publicerad

2005-05-01
PDF · 533 SEK
ASTM E2179
Standard · ASTM ASTM E2179

Standard Test Method for Laboratory Measurement of the Effectiveness of Floor Coverings in Reducing Impact Sound Transmission Through Concrete Floors

1.1 This test method describes a method for the laboratory measurement of the effectiveness of floor coverings in reducing impact noise from a standard tapping machine through concrete floors. The ...

Språk

Publicerad

2003-04-10
PDF · 533 SEK
ASTM D2943
Standard · ASTM ASTM D2943

Standard Test Method for Aluminum Scratch of 1,1,1-Trichloroethane to Determine Stability

1.1 This is a screening test method to determine if sufficient inhibitors are present in 1,1,1-trichloroethane to provide at least minimal stability in the presence of aluminum. 1.2 Solvent passing...

Språk

Publicerad

2007-05-09
PDF · 468 SEK
ASTM E1346
Standard · ASTM ASTM E1346

Standard Practice for Bulk Sampling, Handling, and Preparing Edible Vegetable Oils for Sensory Evaluation

1.1 This practice covers the recommended procedures for bulk sampling, handling, and preparing edible vegetable oil (liquid at room temperature) prior to sensory evaluation. 1.2 This practice is c...

Språk

Publicerad

2006-04-01
PDF · 468 SEK
ASTM F1536
Standard · ASTM ASTM F1536

Standard Test Method for Determining Strength and Setting Time of Synthetic Water-Activated Polyurethane Fiberglass Orthopaedic Casting Tape

1.1 This test method covers the functional diametral compression strength of cylindrical test specimens formed from synthetic fiberglass polyurethane casting materials. The test specimens employed...

Språk

Publicerad

2005-04-01
PDF · 533 SEK
ASTM D6412/D6412M
Standard · ASTM ASTM D6412/D6412M

Standard Specification For Epoxy (Flexible) Adhesive For Bonding Metallic And Nonmetallic Materials

1.1&#x00a0;The specification covers a two-part modified epoxy paste adhesive for bonding metallic and nonmetallic materials. The adhesive should be suitable for forming bonds that can wit The s...

Språk

Publicerad

2005-04-01
PDF · 468 SEK
ASTM D76/D76M
Standard · ASTM ASTM D76/D76M

Standard Specification for Tensile Testing Machines for Textiles

1.1 This specification covers the operating characteristics of three types of tensile testing machines used for the determination of the force-elongation properties of textile materials. These type...

Språk

Publicerad

2012-02-24
PDF · 533 SEK
ASTM B517
Standard · ASTM ASTM B517

Standard Specification for Welded Nickel-Chromium-Iron-Alloy (UNS N06600, UNS N06603, UNS N06025, and UNS N06045) Pipe

1.1 This specification covers welded, cold-worked, and annealed nickel-chromium-iron alloy (UNS N06600,* N06603, N06025, and N06045) pipe for general corrosive service and heat-resisting app...

Språk

Publicerad

2009-10-01
PDF · 468 SEK
ASTM F1817
Standard · ASTM ASTM F1817

Standard Test Method for Performance of Conveyor Ovens

1.1 This test method covers an evaluation of the energy consumption and cooking performance of conveyor ovens. The food service operator can use this evaluation to select a conveyor oven and unders...

Språk

Publicerad

2009-10-01
PDF · 611 SEK
ASTM E664/E664M
Standard · ASTM ASTM E664/E664M

Standard Practice for the Measurement of the Apparent Attenuation of Longitudinal Ultrasonic Waves by Immersion Method

1.1 This practice describes a procedure for measuring the apparent attenuation of ultrasound in materials or components with flat, parallel surfaces using conventional pulse-echo ultrasonic flaw de...

Språk

Publicerad

2010-06-01
PDF · 468 SEK
ASTM F2188
Standard · ASTM ASTM F2188

Standard Test Method for Determining the Effect of Variable Frequency Vibration on a Membrane Switch or Membrane Switch Assembly

1.1 This test method establishes procedures for determining the effect of sinusoidal vibration, within the specified frequency range, on switch contacts, mounting hardware, adhered component parts,...

Språk

Publicerad

2002-05-10
PDF · 468 SEK
ASTM E1941
Standard · ASTM ASTM E1941

Standard Test Method for Determination of Carbon in Refractory and Reactive Metals and Their Alloys by Combustion Analysis

1.1 This test method applies to the determination of carbon in refractory and reactive metals and their alloys in quantities from 20 &#x03BC;g to 500 &#x03BC;g. This corresponds to

Språk

Publicerad

2010-12-01
PDF · 468 SEK
ASTM A335/A335M
Standard · ASTM ASTM A335/A335M

Standard Specification for Seamless Ferritic Alloy-Steel Pipe for High-Temperature Service

1.1 This specification covers nominal wall and minimum wall seamless ferritic alloy-steel pipe intended for high-temperature service. Pipe ordered to this specification shall be suitable for bendi...

Språk

Publicerad

2011-11-18
PDF · 533 SEK
ASTM D5558
Standard · ASTM ASTM D5558

Standard Test Method for Determination of the Saponification Value of Fats and Oils

1.1 This test method covers the determination of the saponification value of fats and oils. 1.2 The values stated in SI units are to be regarded as standard. No other units of measurement are inc...

Språk

Publicerad

2006-04-01
PDF · 468 SEK
ASTM E1079
Standard · ASTM ASTM E1079

Standard Practice for Calibration of Transmission Densitometers

1.1 This practice covers the calibration of transmission densitometers used to perform radiographic film density measurements (see Note 1). 1.2 This standard does not purport to address all of the sa

Språk

Publicerad

2010-09-17
PDF · 468 SEK
ASTM F152
Standard · ASTM ASTM F152

Standard Test Methods for Tension Testing of Nonmetallic Gasket Materials

1.1 These test methods cover the determination of tensile strength of certain nonmetallic gasketing materials at room temperature. The types of materials covered are those containing asbestos and o...

Språk

Publicerad

1995-01-15
PDF · 468 SEK
ASTM F1238
Standard · ASTM ASTM F1238

Standard Specification for Refractory Silicide Sputtering Targets for Microelectronic Applications

1.1 This specification covers sputtering targets fabricated from metallic silicides (molybdenum silicide, tantalum silicide, titanium silicide, and tungsten silicide). These targets are referred to...

Språk

Publicerad

1999-12-10
PDF · 468 SEK
ASTM D5322
Standard · ASTM ASTM D5322

Standard Practice for Immersion Procedures for Evaluating the Chemical Resistance of Geosynthetics to Liquids

1.1 This practice covers laboratory immersion procedures for the testing of geosynthetics for chemical resistance to liquid wastes, prepared chemical solutions, and leachates derived from solid was...

Språk

Publicerad

1998-05-10
PDF · 468 SEK
ASTM D3307
Standard · ASTM ASTM D3307

Standard Specification for Perfluoroalkoxy (PFA)-Fluorocarbon Resin Molding and Extrusion Materials

1.1 This specification covers melt processable molding and extrusion materials of PFA-perfluoro(alkoxy alkane) fluorocarbon resin. The materials are copolymers of TFE-fluorocarbon resins containing...

Språk

Publicerad

2010-09-17
PDF · 533 SEK
ASTM A116
Standard · ASTM ASTM A116

Standard Specification for Metallic-Coated, Steel Woven Wire Fence Fabric

1.1 This specification covers metallic-coated steel fence fabric having a series of horizontal (line) wires, with vertical (stay) wires either wrapped around the line wire (hinge joint) or fixed wi...

Språk

Publicerad

2011-05-20
PDF · 533 SEK
ASTM D4826
Standard · ASTM ASTM D4826

Standard Practice for Units of Measurement and Conversion Factors for Pulp, Paper, and Paperboard (Withdrawn 2010)

1.1 This practice covers the application of the International System of Units (abbreviated SI) within the field of pulp, paper, and paperboard. The SI units have been adopted by ISO, ASTM, and TAPP...

Språk

Publicerad

2007-09-05

Upphävd

2010-05-01
PDF · 533 SEK
ASTM B768
Standard · ASTM ASTM B768

Standard Specification for Copper-Cobalt-Beryllium Alloy and Copper-Nickel-Beryllium Alloy Strip and Sheet

1.1 This specification establishes the requirements for copper-cobalt-beryllium and copper-nickel-beryllium strip and sheet. The following alloys are covered:1.2 The values stated in inch-pound uni...

Språk

Publicerad

2011-12-16
PDF · 468 SEK
ASTM D4551
Standard · ASTM ASTM D4551

Standard Specification for Poly(Vinyl Chloride) (PVC) Plastic Flexible Concealed Water-Containment Membrane

1.1 This specification covers poly(vinyl chloride) (PVC) flexible sheeting which is used without mastic, bedding, or coating for construction of concealed water-containment-membranes in This specif...

Språk

Publicerad

2012-11-23
PDF · 533 SEK
ASTM D1562
Standard · ASTM ASTM D1562

Standard Classification System and Basis for Specification for Cellulose Acetate Propionate Molding and Extrusion Compounds

1.1 This classification system covers requirements for plasticized cellulose acetate propionate thermoplastic compounds suitable for injection molding and extrusion. These compounds have a propiony...

Språk

Publicerad

2009-11-01
PDF · 533 SEK
ASTM D5194
Standard · ASTM ASTM D5194

Standard Test Method for Trace Chloride in Liquid Aromatic Hydrocarbons

1.1 This test method covers the determination of total chloride (organic and inorganic) in liquid aromatic hydrocarbons and cyclohexane. 1.2 The test method is applicable to samples with chlorid...

Språk

Publicerad

2011-03-18
PDF · 468 SEK
ASTM F1437
Standard · ASTM ASTM F1437

Standard Practice for Inclined Cargo Tank Ladders (Withdraw 2010)

1.1 This practice provides design, construction, and installation criteria for inclined ladders to be installed within cargo tanks.1.2 Where ladders are attached to platforms, see Fig. 1 and Fig. 2...

Språk

Publicerad

2006-12-01

Upphävd

2010-03-01
PDF · 468 SEK
ASTM E2191/E2191M
Standard · ASTM ASTM E2191/E2191M

Standard Practice for Examination of Gas-Filled Filament-Wound Composite Pressure Vessels Using Acoustic Emission

1.1 This practice provides guidelines for acoustic emission (AE) examination of filament-wound composite pressure vessels, for example, the type used for fuel tanks in vehicles which use natural ga...

Språk

Publicerad

2010-06-01
PDF · 533 SEK
ASTM D5879
Standard · ASTM ASTM D5879

Standard Practice for Surface Site Characterization for On-Site Septic Systems

1.1 This practice covers procedures for the characterization of surface conditions at a site for evaluating suitability for an on-site septic system for disposal and treatment of wastewater. This p...

Språk

Publicerad

1995-12-10
PDF · 468 SEK
Förfina din sökning genom att visa:
...som handlar om:

Ämnesområden (0)

Avbryt

Branscher (0)

Avbryt

Syfte (0)

Avbryt

Material (0)

Avbryt
Visa varukorgen Fortsätt handla 0
Varukorgen Stäng
Annonstext