21313 träffar på

ASTM E2302
Standard · ASTM ASTM E2302

Standard Test Method for Measurement of the Luminance Coefficient Under Diffuse Illumination of Pavement Marking Materials Using a Portable Reflect...

1.1 This test method covers measurement of the luminance coefficient under diffuse illumination of horizontal pavement markings, such as traffic stripes and surface symbols, and pavement surfac...

Språk

Publicerad

2003-12-01
PDF · 533 SEK
ASTM D3758
Standard · ASTM ASTM D3758

Standard Practice for Evaluation of Spray-Buff Products on Test Floors

1.1 This practice covers the comparison of the performance of spray-buff products on test floors against a reference material. Spray-buff products are to be used to maintain base floor-polish films...

Språk

Publicerad

1995-07-15
PDF · 468 SEK
ASTM D5483
Standard · ASTM ASTM D5483

Standard Test Method for Oxidation Induction Time of Lubricating Greases by Pressure Differential Scanning Calorimetry

1.1 This test method covers the determination of oxidation induction time of lubricating greases subjected to oxygen at 3.5 MPa (500 psig) and temperatures between 155 and 210°C. 1.2 T

Språk

Publicerad

2005-12-15
PDF · 533 SEK
ASTM E1324
Standard · ASTM ASTM E1324

Standard Guide for Measuring Some Electronic Characteristics of Ultrasonic Testing Instruments

1.1 This guide describes procedures for electronically measuring the following performance-related characteristics of some sections of ultrasonic instruments: 1.1.1 Power Supply S

Språk

Publicerad

2011-09-16
PDF · 611 SEK
ASTM D6161
Standard · ASTM ASTM D6161

Standard Terminology Used for Microfiltration, Ultrafiltration, Nanofiltration and Reverse Osmosis Membrane Processes

1.1 This terminology covers the use of microfiltration, ultrafiltration, nanofiltration and reverse osmosis for membrane separation processes.

Språk

Publicerad

2010-02-01
PDF · 611 SEK
ASTM D3752
Standard · ASTM ASTM D3752

Standard Test Method for Strength Imparted by Asbestos to a Cementitious Matrix

1.1 This test method covers the measurement, on a laboratory scale, of the contribution of asbestos fibers to the strength of asbestos-cement products. The results obtained are used in the primary...

Språk

Publicerad

2006-06-01
PDF · 533 SEK
ASTM F2392
Standard · ASTM ASTM F2392

Standard Test Method for Burst Strength of Surgical Sealants

1.1 This test method provides a means for comparison of the burst or rupture strength of sealants on soft tissue. This test method can be used as a clinically relevant model for quality assurance...

Språk

Publicerad

2004-05-01
PDF · 533 SEK
ASTM G12
Standard · ASTM ASTM G12

Standard Test Method for Nondestructive Measurement of Film Thickness of Pipeline Coatings on Steel (Withdrawn 2007)

1.1 This test method describes the nondestructive measurement of the thickness of a dry, nonmagnetic coating applied to the external surface of steel pipe. The method is recommended for coating thi...

Språk

Publicerad

1998-07-10

Upphävd

2007-03-21
PDF · 468 SEK
ASTM D1684
Standard · ASTM ASTM D1684

Standard Practice for Lighting Cotton Classing Rooms for Color Grading

1.1 This practice covers practices in general use in the United States for lighting cotton classing rooms, provides general background information regarding the development and establishment of the...

Språk

Publicerad

2007-01-01
PDF · 468 SEK
ASTM C1467/C1467M
Standard · ASTM ASTM C1467/C1467M

Standard Specification for the Installation of Molded Glass Fiber Reinforced Gypsum Parts

1.1 This specification covers the installation of molded glass fiber reinforced gypsum (GRG) parts. 1.2 The values stated in either inch-pound units or SI (metric) are to be regarded separately as ...

Språk

Publicerad

2006-05-01
PDF · 468 SEK
ASTM F1601
Standard · ASTM ASTM F1601

Standard Test Method for Motor Life Evaluation of an Electric Motorized Nozzle for Central Vacuum Cleaning Systems

1.1 This test method covers the motorized nozzle used in household or commercial central vacuum cleaning systems. 1.2 This test method provides a test for determining operating motor life in hours ...

Språk

Publicerad

2006-01-01
PDF · 533 SEK
ASTM B177/B177M
Standard · ASTM ASTM B177/B177M

Standard Guide for Engineering Chromium Electroplating

1.1 This guide provides information about the deposition of chromium on steel for engineering uses. This is sometimes called “functional” or &#x2 This guide provides info...

Språk

Publicerad

2011-09-16
PDF · 533 SEK
ASTM D4985
Standard · ASTM ASTM D4985

Standard Specification for Low Silicate Ethylene Glycol Base Engine Coolant for Heavy Duty Engines Requiring a Pre-Charge of Supplemental Coolant A...

1.1 This specification covers the requirements for low silicate ethylene glycol base engine coolants for cooling systems of heavy-duty engines. When concentrates are used at 40 to 60 % concentratio...

Språk

Publicerad

2010-05-17
PDF · 533 SEK
ASTM B951
Standard · ASTM ASTM B951

Standard Practice for Codification of Unalloyed Magnesium and Magnesium-Alloys, Cast and Wrought

1.1 This practice provides a system for designating unalloyed magnesium and magnesium-alloys that have been used commercially since 1952, and thus is intended to be the registration source for unal...

Språk

Publicerad

2012-02-24
PDF · 533 SEK
ASTM D1831
Standard · ASTM ASTM D1831

Standard Test Method for Roll Stability of Lubricating Grease

1.1 This test method covers determination of the changes in the consistency, as measured by cone penetration, of lubricating greases when worked in the roll stability test apparatus. 1.2 The values...

Språk

Publicerad

2011-05-20
PDF · 468 SEK
ASTM D3774
Standard · ASTM ASTM D3774

Standard Test Method for Width of Textile Fabric

1.1 This test method covers the measurement of the width of fabrics, pile or napped surface width, or both. The method is applicable to full rolls, bolts of fabric, and short specimens removed from...

Språk

Publicerad

2008-07-01
PDF · 468 SEK
ASTM D7488
Standard · ASTM ASTM D7488

Standard Test Method for Open Time of Latex Paints

1.1 This test method covers a procedure to determine the length of time a latex paint remains “wet” or “open&#

Språk

Publicerad

2011-09-16
PDF · 468 SEK
ASTM D6350
Standard · ASTM ASTM D6350

Standard Test Method for Mercury Sampling and Analysis in Natural Gas by Atomic Fluorescence Spectroscopy (Withdrawn 2012)

1.1 This test method covers the determination of total mercury in natural gas streams down to 0.001 μg/m3. It includes procedures to both obtaining a representative sample and the atomic f...

Språk

Publicerad

2003-05-10

Upphävd

2012-07-01
PDF · 533 SEK
ASTM F2773
Standard · ASTM ASTM F2773

Standard Practice for Transfilling Compressed Air or Nitrogen and Safe Handling of Small Paintball Cylinders

1.1 This practice is intended to satisfy the demand for information on the basic procedures for the safe handling and transfilling of small (not bulk) paintball compressed air cylinders commonly us...

Språk

Publicerad

2011-05-20
PDF · 468 SEK
ASTM C1443
Standard · ASTM ASTM C1443

Standard Specification for Glasses, Portlight, Circular, Fully Tempered

1.1 This specification covers the requirements for circular, fully tempered, high clarity, flat glasses used for portlight applications. 1.2 The values stated in inch-pound units are to be regarded...

Språk

Publicerad

2005-04-01
PDF · 533 SEK
ASTM C950/C950M
Standard · ASTM ASTM C950/C950M

Standard Practice for Repair of a Rigid Cellular Polyurethane Insulation System on Outdoor Service Vessels

1.1 This practice covers the repair of spray-applied polyurethane insulation on vessels normally operating at temperatures between − 30 and +&...

Språk

Publicerad

2008-12-01
PDF · 468 SEK
ASTM E2590
Standard · ASTM ASTM E2590

Standard Guide for Conducting Hazard Analysis-Critical Control Point (HACCP) Evaluations

1.1 This guide describes a stepwise procedure for using existing information, and if available, supporting field and laboratory data concerning a process, materials, or products potentially linked ...

Språk

Publicerad

2009-11-01
PDF · 611 SEK
ASTM D1646
Standard · ASTM ASTM D1646

Standard Test Methods for Rubber—Viscosity, Stress Relaxation, and Pre-Vulcanization Characteristics (Mooney Viscometer)

1.1 These test methods cover procedures for measuring a property called Mooney viscosity. Mooney viscosity is defined as the shearing torque resisting rotation of a cylindrical metal disk (or rot...

Språk

Publicerad

2008-01-09
PDF · 611 SEK
ASTM E822
Standard · ASTM ASTM E822

Standard Practice for Determining Resistance of Solar Collector Covers to Hail by Impact With Propelled Ice Balls

1.1 This practice covers a procedure for determining the ability of cover plates for flat-plate solar collectors to withstand impact forces of falling hail. Propelled ice balls are used to simulat...

Språk

Publicerad

1992-09-15
PDF · 533 SEK
ASTM D1343
Standard · ASTM ASTM D1343

Standard Test Method for Viscosity of Cellulose Derivatives by Ball-Drop Method

1.1 This test method describes the apparatus and general procedure for making ball-drop viscosity measurements on solutions of various cellulose derivatives. Instructions for sample preparation,...

Språk

Publicerad

2006-04-01
PDF · 468 SEK
ASTM A336/A336M
Standard · ASTM ASTM A336/A336M

Standard Specification for Alloy Steel Forgings for Pressure and High-Temperature Parts

1.1 This specification covers ferritic steel forgings for boilers, pressure vessels, high-temperature parts, and associated equipment. 1.2 Forgings made of steel grades listed in Specification Th...

Språk

Publicerad

2010-06-18
PDF · 533 SEK
ASTM D502
Standard · ASTM ASTM D502

Standard Test Method for Particle Size of Soaps and Other Detergents

1.1 This test method covers the determination of the particle size of soaps and other detergents by hand sieving and machine sieving methods. 1.2 The values stated in SI units are to be regarded as...

Språk

Publicerad

2009-10-01
PDF · 468 SEK
ASTM E816
Standard · ASTM ASTM E816

Standard Test Method for Calibration of Pyrheliometers by Comparison to Reference Pyrheliometers

1.1 This test method has been harmonized with, and is technically equivalent to, ISO 9059. 1.2 Two types of calibrations are covered by this test method. One is the calibration of a secondary refer...

Språk

Publicerad

2005-10-01
PDF · 611 SEK
ASTM D5265
Standard · ASTM ASTM D5265

Standard Test Method for Bridge Impact Testing

1.1 This test method is intended to determine the capability of a long package with a narrow cross-section to resist impact near its center when the package is supported only at its ends. This test...

Språk

Publicerad

2009-11-01
PDF · 533 SEK
ASTM D6857/D6857M
Standard · ASTM ASTM D6857/D6857M

Standard Test Method for Maximum Specific Gravity and Density of Bituminous Paving Mixtures Using Automatic Vacuum Sealing Method

1.1 This test method covers the determination of maximum specific gravity of and density of uncompacted bituminous paving mixtures at 25°C [77°F]. 1.

Språk

Publicerad

2011-09-16
PDF · 533 SEK
Förfina din sökning genom att visa:
...som handlar om:

Ämnesområden (0)

Avbryt

Branscher (0)

Avbryt

Syfte (0)

Avbryt

Material (0)

Avbryt
Visa varukorgen Fortsätt handla 0
Varukorgen Stäng
Annonstext