21305 träffar på

ASTM D3614
Standard · ASTM ASTM D3614

Standard Guide for Laboratories Engaged in Sampling and Analysis of Atmospheres and Emissions

1.1 This guide covers criteria to be used by those responsible for the selection, evaluation, operation, and control of laboratory organizations engaged in sampling and analysis of

Språk

Publicerad

2007-09-05
PDF · 533 SEK
ASTM D4307
Standard · ASTM ASTM D4307

Standard Practice for Preparation of Liquid Blends for Use as Analytical Standards

1.1 This practice covers a laboratory procedure for the preparation of small volumes of multicomponent liquid blends for use as analytical standards. 1.2 This practice is applicable to components t...

Språk

Publicerad

2004-05-01
PDF · 468 SEK
ASTM F289
Standard · ASTM ASTM F289

Standard Specification for Molybdenum Wire and Rod for Electronic Applications

D1.1 This specification covers two grades of molybdenum wire less than 0.050 in. (1.27 mm) in diameter and one grade of molybdenum rod 1.00 in. (25.4 mm) or less in diameter as follows: 1.1.1 This ...

Språk

Publicerad

1996-01-01
PDF · 468 SEK
ASTM D6042
Standard · ASTM ASTM D6042

Standard Test Method for Determination of Phenolic Antioxidants and Erucamide Slip Additives in Polypropylene Homopolymer Formulations Using Liquid...

1.1 This test method covers a liquid-chromatographic procedure for the separation of some additives currently used in polypropylene. These additives are extracted with a cyclohexane:methylene chlor...

Språk

Publicerad

2009-09-01
PDF · 533 SEK
ASTM D4711
Standard · ASTM ASTM D4711

Standard Test Method for Sulfonic and Sulfuric Acids in Alkylbenzene Sulfonic Acids

1.1 This test method is applicable to the determination of sulfonic and sulfuric acids in branched and linear alkylbenzene sulfonic acids used as intermediates in synthetic detergents. 1.2 The valu...

Språk

Publicerad

2009-10-01
PDF · 468 SEK
ASTM A983/A983M
Standard · ASTM ASTM A983/A983M

Standard Specification for Continuous Grain Flow Forged Carbon and Alloy Steel Crankshafts for Medium Speed Diesel Engines

1.1 This specification covers continuous grain flow forged carbon and alloy steel crankshafts for medium speed diesel and natural gas engines. 1.2 The steel used in the manufacture of the forgings...

Språk

Publicerad

2006-09-01
PDF · 533 SEK
ASTM D952
Standard · ASTM ASTM D952

Standard Test Method for Bond or Cohesive Strength of Sheet Plastics and Electrical Insulating Materials

1.1 This test method covers the determination of the bond strength or ply adhesion strength of sheet plastic and electrical insulating materials. It is applicable to both laminated and nonlaminated...

Språk

Publicerad

2010-09-17
PDF · 468 SEK
ASTM D4228
Standard · ASTM ASTM D4228

Standard Practice for Qualification of Coating Applicators for Application of Coatings to Steel Surfaces

1.1 This practice provides a standard qualifying method for coating applicators to verify their proficiency and ability to attain the required quality for application of specified coatin This pract...

Språk

Publicerad

2005-12-01
PDF · 468 SEK
ASTM E987
Standard · ASTM ASTM E987

Standard Test Methods for Deglazing Force of Fenestration Products

1.1 These test methods measure the resistance of elements of fenestration products such as operating (or removable) window sashes, storm sashes, and sliding glass door panels (hereafter referred to...

Språk

Publicerad

2009-11-01
PDF · 468 SEK
ASTM F1903
Standard · ASTM ASTM F1903

Standard Practice for Testing For Biological Responses to Particles In Vitro

1.1 This practice covers the production of wear debris and degradation products from implanted materials that may lead to a cascade of biological responses resulting in damage to adjacent and remot...

Språk

Publicerad

2010-09-17
PDF · 468 SEK
ASTM F1712
Standard · ASTM ASTM F1712

Standard Specification for Steel Chain-Link Fencing Materials Used for High Security Applications

1.1 This specification covers chain-link fencing material applications for high security applications. 1.2 The values stated in inch-pound units are to be regarded as standard. The values given in ...

Språk

Publicerad

2011-09-16
PDF · 468 SEK
ASTM D5243
Standard · ASTM ASTM D5243

Standard Test Method for Open-Channel Flow Measurement of Water Indirectly at Culverts

1.1 This test method covers the computation of discharge (the volume rate of flow) of water in open channels or streams using culverts as metering devices. In general, this test m

Språk

Publicerad

2007-09-05
PDF · 858 SEK
ASTM E2489
Standard · ASTM ASTM E2489

Standard Practice for Statistical Analysis of One-Sample and Two-Sample Interlaboratory Proficiency Testing Programs

1.1 This practice describes methods for the statistical analysis of laboratory results obtained from interlaboratory proficiency testing programs. As in accordance with Practice <a href="http://...

Språk

Publicerad

2011-11-18
PDF · 611 SEK
ASTM D6004
Standard · ASTM ASTM D6004

Standard Test Method for Determining Adhesive Shear Strength of Carpet Adhesives

1.1 This test method describes a procedure to measure shear strength development for adhesives used to bond carpet adhesives to selected underlayments. 1.2 This test method provides a quantitative ...

Språk

Publicerad

2004-04-01
PDF · 468 SEK
ASTM D1072
Standard · ASTM ASTM D1072

Standard Test Method for Total Sulfur in Fuel Gases by Combustion and Barium Chloride Titration

1.1 This test method is for the determination of total sulfur in combustible fuel gases, when present in sulfur concentrations between approximately 25 and 700 mg/m3 (1 to 30 This test method is fo...

Språk

Publicerad

2006-06-01
PDF · 533 SEK
ASTM F2781
Standard · ASTM ASTM F2781

Standard Practice for Testing Forced Entry, Ballistic and Low Impact Resistance of Security Fence Systems

1.1 The forced entry resistance of fence systems is evaluated relative to three levels of forced entry threat using the limited hand tool inventory outlined in Table 1. It also establishes a system...

Språk

Publicerad

2011-03-18
PDF · 533 SEK
ASTM D7056
Standard · ASTM ASTM D7056

Standard Test Method for Determining the Tensile Shear Strength of Pre-Fabricated Bituminous Geomembrane Seams

1.1 This test method presents the procedures used for determining the quality of prefabricated bituminous geomembrane (PBGM) bonded seams subjected to a shear test. It describes a destructive qua...

Språk

Publicerad

2007-09-05
PDF · 468 SEK
ASTM B162
Standard · ASTM ASTM B162

Standard Specification for Nickel Plate, Sheet, and Strip

1.1 This specification covers rolled nickel (UNS N02200) and low-carbon nickel (UNS N02201)* plate, sheet, and strip. 1.2 The values stated in inch-pound units are to be regarded as standard. T...

Språk

Publicerad

2009-10-01
PDF · 533 SEK
ASTM F438
Standard · ASTM ASTM F438

Standard Specification for Socket-Type Chlorinated Poly(Vinyl Chloride) (CPVC) Plastic Pipe Fittings, Schedule 40

1.1 This specification covers chlorinated poly(vinyl chloride) (CPVC) Schedule 40 socket-type pipe fittings. Included are requirements for materials, workmanship, dimensions, and burst pressure. ...

Språk

Publicerad

2009-08-01
PDF · 533 SEK
ASTM D6088
Standard · ASTM ASTM D6088

Standard Practice for Installation of Geocomposite Pavement Drains

1.1 This practice covers recommendations and identifies pertinent areas of consideration for the installation of buried geocomposite drains used for highway edgedrains, under-drains, or other pavem...

Språk

Publicerad

2006-06-01
PDF · 533 SEK
ASTM C1613
Standard · ASTM ASTM C1613

Standard Specification for Precast Concrete Grease Interceptor Tanks

1.1 This specification covers design requirements, manufacturing practices, and performance requirements for monolithic or sectional precast concrete grease interceptor tanks. 1.2 This specificatio...

Språk

Publicerad

2010-01-01
PDF · 533 SEK
ASTM D6558
Standard · ASTM ASTM D6558

Standard Test Method for Determination of TGA CO2 Reactivity of Baked Carbon Anodes and Cathode Blocks

1.1 This test method covers the thermogravimetric (TGA) determination of CO2 reactivity and dusting of shaped carbon anodes and cathode blocks used in the aluminum reduction industry. The apparatus...

Språk

Publicerad

2005-05-01
PDF · 533 SEK
ASTM D6005
Standard · ASTM ASTM D6005

Standard Test Method for Determining Slump Resistance of Carpet Adhesives

1.1 This test method describes a procedure to measure slump, or sag, resistance of a trowel-grade carpet adhesive using a button slump test apparatus. 1.2 This test method provides a visual e...

Språk

Publicerad

2009-11-01
PDF · 468 SEK
ASTM F1524
Standard · ASTM ASTM F1524

Standard Guide for Use of Advanced Oxidation Process for the Mitigation of Chemical Spills

1.1&#x00a0;This guide covers the considerations for advanced oxidation processes (AOPs) in the mitigation of spilled chemicals and hydrocarbons dissolved into ground and surface waters.</

Språk

Publicerad

2008-01-09
PDF · 468 SEK
ASTM D3597
Standard · ASTM ASTM D3597

Standard Specification for Woven Upholstery Fabrics-Plain, Tufted, or Flocked

1.1 This performance specification covers the performance requirements for plain, tufted, or flocked woven upholstery fabrics as used in the manufacture of new indoor furniture. These requirements...

Språk

Publicerad

2002-04-10
PDF · 468 SEK
ASTM E1948
Standard · ASTM ASTM E1948

Standard Guide for Analytical Data Interchange Protocol for Chromatographic Data

1.1 This guide covers the implementation of the Chromatographic Data Protocol in analytical software applications. Implementation of this protocol requires: 1.1.1 Specification <a href="http://...

Språk

Publicerad

2009-10-01
PDF · 533 SEK
ASTM D4532
Standard · ASTM ASTM D4532

Standard Test Method for Respirable Dust in Workplace Atmospheres Using Cyclone Samplers

1.1 This test method provides details for the determination of respirable dust concentration defined in terms of international convention in a range from 0.5 to 10 mg/m3 in workplace atmospheres. S...

Språk

Publicerad

2010-08-20
PDF · 533 SEK
ASTM C471M
Standard · ASTM ASTM C471M

Standard Test Methods for Chemical Analysis of Gypsum and Gypsum Products (Metric)

1.1 These test methods cover the chemical analysis of gypsum and gypsum products, including gypsum ready-mixed plaster, gypsum wood-fibered plaster and gypsum concrete. 1.2 The test methods appear ...

Språk

Publicerad

2006-12-01
PDF · 611 SEK
ASTM D6750
Standard · ASTM ASTM D6750

Standard Test Methods for Evaluation of Engine Oils in a High-Speed, Single-Cylinder Diesel Engine&#x2014;1K Procedure (0.4 % Fuel Sulfur) and ...

1.1 These test methods cover the performance of engine oils intended for use in certain diesel engines. They are performed in a standardized high-speed, single-cylinder diesel engine by either the ...

Språk

Publicerad

2010-09-17
PDF · 923 SEK
ASTM D1198
Standard · ASTM ASTM D1198

Standard Test Method for Solvent Tolerance of Amine Resins (Withdrawn 2007)

1.1 This test method covers the determination of the quantity of hydrocarbon solvent that an amine resin will tolerate at 77&#176F (25&#176C). 1.2 This standard does not purport to addres...

Språk

Publicerad

1993-01-01

Upphävd

2007-03-16
PDF · 468 SEK
Förfina din sökning genom att visa:
...som handlar om:

Ämnesområden (0)

Avbryt

Branscher (0)

Avbryt

Syfte (0)

Avbryt

Material (0)

Avbryt
Visa varukorgen Fortsätt handla 0
Varukorgen Stäng
Annonstext