1.1 This specification covers gabions and revet matresses produced from double-twisted metallic-coated wire mesh, and metallic-coated wire for lacing wire, stiffeners, and fasteners used for manufa...
2012-02-24
1.1 This performance specification covers fabrics used in bathrobes, dressing gowns, negligee, nightgown, and pajamas. 1.2 These requirements apply to the length and width directions for those p...
2005-07-01
1.1 These criteria cover thermoset plastics based on diglycidyl ethers of bisphenol A (DGEBPA) and appropriate curing agents or catalysts as opposed to thermoplastics based on epoxy structures. 1....
2009-08-01
1.1 This specification provides for the identification of virgin, natural color, unmodified homopolymer ultra-high-molecular-weight polyethylene (UHMW-PE) plastics molding and extrusion materials. ...
2011-11-18
1.1 This test method determines the effect of cooling system chemical solutions on organic finishes used on motor vehicles. Cooling system chemicals include: coolants or corrosion
2006-11-01
1.1 This specification covers coal tar adhesive with or without polymer modification suitable for brush, spray, squeegee and trowel application to coal tar built up and coal tar modified bitumen me...
2009-07-01
1.1 This test method describes the determination of the retention of air by fabrics coated on one or both sides with rubber. 1.2 The values stated in either SI units or inch-pound units are to be r...
2002-12-10
1.1 This specification sets minimum requirements for light sport gyroplane or gyroplane component quality assurance and production acceptance programs. 1.2 This specification applies to light sport...
2009-10-01
1.1 This test method covers the determination of residual stresses in a transparent glass matrix by means of a polarizing microscope using null or retardation compensation procedures. 1.2 Such resi...
2004-06-01
1.1 This practice describes test methods and data analyses used to develop models for the prediction of the long-term behavior of materials, such as engineered barrier system (EBS)
2007-09-05
1.1 This test method establishes the requirements for a standardized method of evaluating the quality of crimped-type electrical connections to solid or stranded conductors. This test method ap...
2005-11-01
1.1 This specification covers post-applied coatings, pavings, and linings for corrugated steel pipe and corrugated steel structural plate pipe, pipe-arches, and arches coated, paved, or lined with ...
2011-04-15
1.1 This test method is a small-scale test for obtaining information regarding the free-swelling properties of a coal. The results may be used as an indication of the caking characteristic of th...
2004-04-01
1.1 This specification covers the magnetic properties of 50 nickel-50 iron parts fabricated by powder metallurgy techniques and is intended for parts that require high magnetic permeability, high e...
2009-11-01
1.1 These test methods are intended for determining the softening point of hydrocarbon resins, rosin based resins and similar materials by means of an automated ring-and-ball apparatus. Portions ...
2011-09-16
1.1 This practice covers the procedure for preparation of hot recycled bituminous blends for testing in the laboratory. The procedure involves an iterative trial blend process followed by the pre...
1.1 This specification covers carbon and low alloy steel castings having chemical analyses similar to that of the standard wrought grades. This specification covers carbon and low alloy...
2008-04-09
1.1 This practice covers general use in reporting structural performance tests of building constructions, elements, connections, and assemblies. A comprehensive report describing the conditions und...
2005-10-01
1.1 This test method is applicable to any vacuum cleaner that is classified as a utility vac. 1.2 The values stated in inch-pound units are to be regarded as standard. The values in parentheses are...
2006-07-01
1.1 This practice covers the determination of the corrosiveness of tank-type aircraft maintenance chemicals on aircraft metals and the corrodibility of metals in these maintenance chemicals with ti...
2009-05-15
1.1 This set of definitions is intended for use by all parties who use, sell, manufacture, test, or develop printer or copier machines so that they will have a common basis for communications.
1.1 This specification covers isobutyl acetate (95 % grade). 1.2 The following applies to all specified limits in this standard; for purposes of determining conformance with this standard, an...
2009-12-01
1.1 This test method covers the evaluation of gaskets under corrosive conditions at varying temperature and pressure levels. The test unit may be glass lined if the flanges are sufficiently plane (...
1.1 These test methods provide three procedures for the determination of the moisture content of activated carbon. The procedures may also be used to dry samples required for other tests. The oven...
1.1 This specification covers all forms of fiber-reinforced concrete that are delivered to a purchaser with the ingredients uniformly mixed, and that can be sampled and tested at the point of deli...
2011-05-20
1.1 This specification covers tool steel compositions for usable shapes cast by pouring directly into suitable molds and for master heats for remelting and casting. Note 1—A This speci...
2010-10-01
1.1 This test method describes a laboratory procedure for determining the flow characteristics of preformed tape sealants after a specified time, temperature, and load. 1.2 The values stated in SI ...
1.1 This specification covers vacuum-treated carbon and alloy steel forgings for turbine rotors and shafts. 1.2 The values stated in either SI units or inch-pound units are to be regarded separate...
2005-09-01
1.1 This test method covers the calculation of the viscosity-gravity constant (VGC) of petroleum oils having viscosities in excess of 5.5 mm2/s at 40°C (104°</spa
2011-12-16
1.1 This specification establishes the criteria for the manufacture, quality assurance testing, inspection, installation, field acceptance testing, and product marking of vitrified clay pipe to b...