1.1 This test method describes a procedure for determining the effect of exposure to alkaline environments on the strength of cellulose fibers. An alkaline environment is defined t
2008-06-01
1.1 This is an acceptance specification for the ultrasonic inspection of forged steel crankshafts having main bearing journals or crankpins 4 in. [100 mm] or larger in diameter. 1.2 This specifica...
2006-03-01
1.1 These test methods provide procedures for stressing photovoltaic modules in simulated temperature and humidity environments. Environmental testing is used to simulate aging of module mater...
2009-04-01
1.1 This practice (1,2) covers the basic principles for establishing related unit stresses and stiffness values for design with visually-graded solid sawn structural lumber. This practice starts ...
1.1 This specification covers requirements for HCFC Blend B as a fire-fighting medium. 1.2 This specification does not address the fire-fighting equipment or hardware that employs HCFC Blend B or t...
2011-10-14
1.1 This practice identifies the information to be provided through the use and care booklet accompanying a particular model of vacuum cleaner. 1.2 Included is information that the user needs to op...
2006-01-01
1.1 This guide covers the description of carbide structures in annealed high carbon bearing steels. 1.2 Included is a guide for rating steel specimens by a graded series of photomicrographs showing...
2009-10-01
1.1 This specification describes glass cullet recovered from municipal waste destined for disposal. The recovered cullet is intended for use in the manufacture of glass fiber used for insulation-ty...
1998-09-10
1.1 This specification covers requirements for glass burets of precision and general-purpose grades suitable for laboratory use. This specification covers requirements for glass burets...
2002-10-10
1.1 This specification covers electric-fusion-welded steel pipe with filler metal added, fabricated from pressure vessel quality plate of several analyses and strength levels and suitable for high...
2011-05-20
1.1 This test method covers the determination of the acidity in aviation turbine fuel in the range from 0.000 to 0.100 mg KOH/g. 1.2 The values stated in SI units are to be regarded as standard. No...
2011-09-16
1.1 This practice is intended to evaluate changes in kinetic performance of ion exchange resins used in mixed beds to produce high purity water. Within strict limitations, it also may be used for c...
2004-06-01
1.1 This guide covers the general technique of “spiking” a broad range of materials into aqueous media. This guide will serve the analyst in preparing spiked samples fo
2006-08-15
1.1 This test method is intended to be used for calibration and characterization of primary terrestrial photovoltaic reference cells to a desired reference spectral irradiance distribution, such a...
2010-09-17
1.1 This practice covers a system of general classification for the basic rubbers both in dry and latex forms determined from the chemical composition of the polymer chain. 1.2 The purpose of this...
2010-02-01
1.1 This guide covers a series of options but does not specify a course of action. It should not be used as the sole criterion or basis of comparison and does not replace or relieve professional ju...
2004-05-01
1.1 This test method covers evaluation of the energy consumption and refrigeration performance of refrigerated buffet and preparation tables. The food service operator can use this evaluation to se...
2004-10-01
1.1 This specification covers toluene for toluene diisocyanate (TDI) feedstock. 1.2 The following applies to all specified limits in this specification: for purposes of determining conformance wi...
2009-12-01
1.1 This test method covers the determination of the evaporative resistance of clothing ensembles. It describes the measurement of the resistance to evaporative heat transfer from a heated sweating...
1.1 This specification covers UNS N08120, UNS N08800, UNS N08810, UNS N08811,* and UNS N08890 in the form of hot-worked and cold-worked rod and bar. Alloy UNS N08800 is normally employed in ser...
2007-02-07
1.1 This test method covers the observation of the temperatures at which triangular pyramids (cones) prepared from coal and coke ash attain and pass through certain defined stages of fusing and fl...
2010-09-01
1.1 This practice covers guidelines for evaluating precision and serves as the governing practice for interlaboratory test programs (ITP) used to evaluate precision for test methods as used in the ...
2005-12-01
1.1 This standard is a compilation of terminology, related definitions, and descriptions of terms used in the gasket industry. Included terms are those used to define materials, testing
2004-04-01
1.1 This test method covers the detection of holes in medical gloves. 1.2 This test method is limited to the detection of holes that allow water leakage under the conditions of the test. 1.3 The sm...
2006-12-15
1.1 This specification covers manufacturing and testing of rubber insulating gloves for protection of workers from electrical shock. 1.2 Two types of gloves are provided and are designated as Type...
2009-06-01
1.1 This specification covers high-strength quenched and tempered alloy steel plates intended for use in fusion welded boilers and other pressure vessels. 1.2 This specification includes a number...
2011-03-18
1.1 This test method covers a measurement of the oxidation stability of biodiesel (B100) blendstock as specified in Specification D6751 and blends of
1.1 This test method covers the measurement of the tearing strength of nonwoven fabrics by the tongue (single rip) procedure using a recording constant-rate-of-extension (CRE) tensile testing machi...
2001-01-01
1.1 This classification is intended to establish a classification system and test methods for petroleum waxes used in rubber compounding primarily as a static protective agent or material for unsat...
2005-05-01
1.1 This guide covers the method for measuring the real time, in situ radiation-induced alterations to the Raman spectral signal transmitted by a multimode, step index, silica opti
2004-11-01