21356 träffar på

ASTM E868
Standard · ASTM ASTM E868

Standard Test Methods for Conducting Performance Tests on Mechanical Conveying Equipment Used in Resource Recovery Systems

1.1 These test methods include descriptions for conducting and reporting throughput and electrical power tests on mechanical conveying equipment for municipal solid waste and recovered products fro...

Språk

Publicerad

2005-02-01
PDF · 533 SEK
ASTM D7051
Standard · ASTM ASTM D7051

Standard Test Method for Cyclic Thermal Shock of SBS-Modified Bituminous Roofing Sheets with Factory-Applied Metal Surface

1.1 This test method covers the measurement of movement due to cyclic thermal exposure of SBS (styrene-butadiene-styrene)-modified bituminous sheets with a factory-applied metal foil surface.1.2 Th...

Språk

Publicerad

2005-05-01
PDF · 533 SEK
ASTM F2015
Standard · ASTM ASTM F2015

Standard Specification for Lap Joint Flange Pipe End Applications

DESIG: F2015 00 (Reapproved 2006) ^TITLE: Standard Specification for Lap Joint Flange Pipe End Applications ^SCOPE:1. Scope 1.1 This specification covers the pipe material and wall thickness appli...

Språk

Publicerad

2006-05-01
PDF · 468 SEK
ASTM C1371
Standard · ASTM ASTM C1371

Standard Test Method for Determination of Emittance of Materials Near Room Temperature Using Portable Emissometers

1.1 This test method covers a technique for determination of the emittance of typical materials using a portable differential thermopile emissometer. The purpose of the test method is to provide a ...

Språk

Publicerad

2004-09-01
PDF · 533 SEK
ASTM D3685/D3685M
Standard · ASTM ASTM D3685/D3685M

Standard Test Methods for Sampling and Determination of Particulate Matter in Stack Gases

1.1 These test methods describe procedures to determine the mass emission rates of particulate matter and collected residue in gaseous streams by in-stack test methods (Test Method A) or out-of-sta...

Språk

Publicerad

2005-03-01
PDF · 611 SEK
ASTM D1857
Standard · ASTM ASTM D1857

Standard Test Method for Fusibility of Coal and Coke Ash

1.1 This test method covers the observation of the temperatures at which triangular pyramids (cones) prepared from coal and coke ash attain and pass through certain defined stages of fusing and flo...

Språk

Publicerad

2004-07-01
PDF · 533 SEK
ASTM D5409
Standard · ASTM ASTM D5409

Standard Guide for Set of Data Elements to Describe a Ground-Water Site; Part Two-Physical Descriptors

1.1 This guide covers Part Two of three guides to be used in conjunction with Practice D 5254 that delineates the data desirable to describe a ground-water data collection or sampling site. This gu...

Språk

Publicerad

2004-07-01
PDF · 611 SEK
ASTM D3423
Standard · ASTM ASTM D3423

Standard Practice for Application of Emulsified Coal-Tar Pitch (Mineral Colloid Type)

1.1 This practice covers the application of mineral-colloid-stabilized, emulsified coal-tar pitch meeting the requirements of Specification D 3320, as a weather protection and aliphatic-solvent-res...

Språk

Publicerad

2003-07-10
PDF · 468 SEK
ASTM B462
Standard · ASTM ASTM B462

Specification for Forged or Rolled UNS N06030,N06022,N06035,N06200,N06059,N06686,N08020,N08024,N08026,N08367,N10276,N10665, N10675,N10629, N08031,N...

DESIG: B462 06 ^TITLE: Standard Specification for Forged or Rolled UNS N06030, UNS N06022, UNS N06035, UNS N06200, UNS N06059, UNS N06686, UNS N08020, UNS N08024, UNS N08026, UNS N08367, UNS N1027...

Språk

Publicerad

2006-06-01
PDF · 533 SEK
ASTM D4074
Standard · ASTM ASTM D4074

Standard Test Method for Bitumen and Aggregate Content of Bitumen-Aggregate Mixtures From Roofing Samples

1.1 This test method covers the determination of the bitumen content of adhered aggregate surfacing on a roof, and the approximate mass per unit area of the flood coat and adhered aggregate.1.2 The...

Språk

Publicerad

2004-09-01
PDF · 468 SEK
ASTM E2134
Standard · ASTM ASTM E2134

Standard Test Method for Evaluating the Tensile-Adhesion Performance of an Exterior Insulation and Finish System (EIFS)

1.1 This test method evaluates the tensile-adhesion performance of an exterior insulation and finish System (EIFS) or its individual components by two different procedures: Procedure A, Dry Conditi...

Språk

Publicerad

2006-09-01
PDF · 468 SEK
ASTM D1641
Standard · ASTM ASTM D1641

Standard Practice for Conducting Outdoor Exposure Tests of Varnishes

1.1 This practice covers the procedure for evaluating durability of varnishes applied to a wooden substrate.1.2 The values stated in SI units are to be regarded as the standard. The values given in...

Språk

Publicerad

2004-06-01
PDF · 468 SEK
ASTM D4687
Standard · ASTM ASTM D4687

Standard Guide for General Planning of Waste Sampling

1.1 This guide provides information for formulating and planning the many aspects of waste sampling (see 1.2) which are common to most waste sampling situations.1.2 The aspects of sampling which th...

Språk

Publicerad

2006-02-01
PDF · 611 SEK
ASTM D4027
Standard · ASTM ASTM D4027

Standard Test Method for Measuring Shear Properties of Structural Adhesives by the Modified-Rail Test

1.1 This test method describes equipment and procedures to measure the shear modulus and shear strength of adhesive layers between rigid adherends. The equipment may also be used for determining th...

Språk

Publicerad

2004-04-01
PDF · 533 SEK
ASTM D800
Standard · ASTM ASTM D800

Standard Test Methods of Chemical Analysis of Industrial Metal Cleaning Compositions

1.1 These test methods describe the procedures for the chemical analysis of industrial metal cleaning compositions in solid, paste, or liquid form. These cleaning compositions may contain caustic a...

Språk

Publicerad

2005-05-01
PDF · 611 SEK
ASTM E349
Standard · ASTM ASTM E349

Standard Terminology Relating to Space Simulation

-

Språk

Publicerad

2006-04-01
PDF · 533 SEK
ASTM D4603
Standard · ASTM ASTM D4603

Standard Test Method for Determining Inherent Viscosity of Poly(Ethylene Terephthalate) (PET) by Glass Capillary Viscometer

1.1 This test method is for the determination of the inherent viscosity of poly(ethylene terephthalate) (PET) soluble at 0.50 % concentration in a 60/40 phenol/1,1,2,2-tetrachloroethane solution by...

Språk

Publicerad

2003-01-01
PDF · 468 SEK
ASTM C186
Standard · ASTM ASTM C186

Standard Test Method for Heat of Hydration of Hydraulic Cement

1.1 This test method covers the determination of the heat of hydration of a hydraulic cement by measuring the heat of solution of the dry cement and the heat of solution of a separate portion of th...

Språk

Publicerad

2005-07-01
PDF · 533 SEK
ASTM D7253
Standard · ASTM ASTM D7253

Standard Test Method for Polyurethane Raw Materials: Determination of Acidity as Acid Number for Polyether Polyols

1.1 This test method measures the acidic constituents in polyether polyols and reports the results as acid number. The typical acid number range is 0-0.1 mg KOH/g sample. (See Note 1.)1.2 This stan...

Språk

Publicerad

2006-04-01
PDF · 468 SEK
ASTM D869
Standard · ASTM ASTM D869

Standard Test Method for Evaluating Degree of Settling of Paint

1.1 This test method covers the determination of the degree of pigment suspension and ease of remixing a shelf-aged sample of paint to a homogeneous condition suitable for the intended use.1.2 The ...

Språk

Publicerad

2004-06-01
PDF · 468 SEK
ASTM D6490
Standard · ASTM ASTM D6490

Standard Test Method for Water Vapor Transmission of NonFilm Forming Treatments Used on Cementitious Panels

1.1 This test method covers the determination of the rate at which water vapor passes through non film forming treatments, such as silanes, siloxanes and blends of silanes/siloxanes applied to ceme...

Språk

Publicerad

2006-06-01
PDF · 468 SEK
ASTM D5843
Standard · ASTM ASTM D5843

Standard Guide for Application of Fully Adhered Vulcanized Rubber Sheets Used in Waterproofing

1.1 This guide provides information to assist the specifier in developing a specification for the application and protection of fully adhered EPDM (elastomeric terpolymer synthesized from ethylene,...

Språk

Publicerad

2006-05-01
PDF · 468 SEK
ASTM E951
Standard · ASTM ASTM E951

Standard Test Methods for Laboratory Testing of Non-Commercial Mosquito Repellent Formulations On the Skin

1.1 These test methods apply to repellent compounds and formulations that can be appropriately diluted with ethanol, acetone, or a similar inert carrier for test purposes. The test methods describe...

Språk

Publicerad

2006-04-01
PDF · 533 SEK
ASTM F980M
Standard · ASTM ASTM F980M

Standard Guide for Measurement of Rapid Annealing of Neutron-Induced Displacement Damage in Silicon Semiconductor Devices [Metric]

1.1 This guide defines the requirements and procedures for testing silicon discrete semiconductor devices and integrated circuits for rapid-annealing effects from displacement damage resulting from...

Språk

Publicerad

1996-06-10
PDF · 533 SEK
ASTM D5898
Standard · ASTM ASTM D5898

Standard Guide for Standard Details for Adhered Sheet Waterproofing

p>1.1 This guide covers details for typical conditions encountered in adhered sheet waterproofing on below grade structures and plazas.1.2 This guide does not cover liquid applied waterproofing....

Språk

Publicerad

2005-07-01
PDF · 611 SEK
ASTM D6945
Standard · ASTM ASTM D6945

Standard Specification for Emulsified Refined Coal-Tar (Ready to Use, Commercial Grade)

1.1 This specification covers mineral-colloid-stabilized, emulsified refined coal tar suitable for use as a weather-protective and petroleum (aliphatic) solvent resistant coating. This product is t...

Språk

Publicerad

2003-07-10
PDF · 468 SEK
ASTM B363
Standard · ASTM ASTM B363

Standard Specification for Seamless and Welded Unalloyed Titanium and Titanium Alloy Welding Fittings

1.1 This specification covers fittings intended for general corrosion-resisting and elevated-temperature services, factory made from unalloyed titanium and titanium alloys. The term welding fitting...

Språk

Publicerad

2006-04-01
PDF · 468 SEK
ASTM E1941
Standard · ASTM ASTM E1941

Standard Test Method for Determination of Carbon in Refractory and Reactive Metals and Their Alloys

1.1 This test method applies to the determination of carbon in refractory and reactive metals and their alloys in concentrations from 0.004 to 0.100 % (see Note 1).Note 1—Actual instrumen...

Språk

Publicerad

2004-05-01
PDF · 468 SEK
ASTM D6927
Standard · ASTM ASTM D6927

Standard Test Method for Marshall Stability and Flow of Bituminous Mixtures

1.1 This test method covers measurement of resistance to plastic flow of 102 mm (4 in.) cylindrical specimens of bituminous paving mixture loaded in a direction perpendicular to the cylindrical axi...

Språk

Publicerad

2006-07-01
PDF · 533 SEK
ASTM D3643
Standard · ASTM ASTM D3643

Standard Test Method for Acid Number of Certain Alkali-Soluble Resins

1.1 This test method covers the measurement of the free acidity present in certain alkali-soluble resins. 1.2 This test method is not suitable for styrene-maleic anhydride resins. 1.3 The resin man...

Språk

Publicerad

2004-09-01

Upphävd

2010-05-01
PDF · 468 SEK
Förfina din sökning genom att visa:
...som handlar om:

Ämnesområden (0)

Avbryt

Branscher (0)

Avbryt

Syfte (0)

Avbryt

Material (0)

Avbryt
Visa varukorgen Fortsätt handla 0
Varukorgen Stäng
Annonstext