21301 träffar på

Standard · ASTM ASTM F711

Standard Specification for Fiberglass-Reinforced Plastic (FRP) Rod and Tube Used in Live Line Tools

1.1 This specification covers insulating rods and foam-filled tubes made from fiberglass-reinforced plastic (FRP) that are intended for use in live line tools.1.2 This specification does not includ...

Språk

Publicerad

2007-12-05

PDF · 533 SEK
Standard · ASTM ASTM F1825

Standard Specification for Clampstick Type Live Line Tools

1.1 This specification applies to the Clampstick type live line tools to ensure manufacturing processes and materials are compatible and no deterioration of components occur during the assembly pro...

Språk

Publicerad

2007-12-05

PDF · 468 SEK
Standard · ASTM ASTM D1172

Standard Guide for pH of Aqueous Solutions of Soaps and Detergents

1.1 This guide covers the preparation of aqueous solutions of soaps and detergents and the determination of their pH.1.2 The values stated in SI units are to be regarded as the standard.1.3 This st...

Språk

Publicerad

2007-12-05

PDF · 468 SEK
Standard · ASTM ASTM D1280

Standard Guide for Total Immersion Corrosion Test for Soak Tank Metal Cleaners

1.1 This guide covers determination of the corrosive effects of soak tank metal cleaners on all metals other than aluminum and its alloys, under conditions of total immersion, by quantitative measu...

Språk

Publicerad

2007-12-05

PDF · 468 SEK
Standard · ASTM ASTM D4685

Standard Test Method for Pile Fabric Abrasion

1.1 This test method covers the determination of the abrasion of pile fabrics when the loss of pile tuffs occur, sometimes called pile retention or pile pull out. It includes two procedures:1.1.1 P...

Språk

Publicerad

2007-11-07

PDF · 533 SEK
Standard · ASTM ASTM D7347

Standard Test Method for Determination of Olefin Content in Denatured Ethanol by Supercritical Fluid Chromatography

1.1 This test method covers the determination of the total amount of olefins in denatured ethanol to be used as an oxygenate additive in blended spark ignition engine fuels. The method of determina...

Språk

Publicerad

2007-11-07

PDF · 533 SEK
Standard · ASTM ASTM D5657

Standard Test Method for Fluid Tightness Ability of Adhesives Used on Threaded Fasteners

1.1 This test method covers the determination of the ability of adhesives used for locking and sealing threaded fasteners, to make leak-tight assemblies.1.2 The values stated in inch-pound units a...

Språk

Publicerad

2007-11-07

PDF · 468 SEK
Standard · ASTM ASTM E2563

Standard Test Method for Enumeration of Non-Tuberculosis Mycobacteria in Aqueous Metalworking Fluids by Plate Count Method

1.1 This test method covers the detection and enumeration of viable and culturable rapidly growing Mycobacteria (RGM), or non-tuberculosis Mycobacteria (NTM) in aqueous metalworking fluids (MWF) i...

Språk

Publicerad

2007-11-07

PDF · 468 SEK
Standard · ASTM ASTM C1006

Standard Test Method for Splitting Tensile Strength of Masonry Units

1.1 This test method covers the determination of the splitting tensile strength of masonry units.1.2 The values stated in inch-pound units are to be regarded as standard. The values given in parent...

Språk

Publicerad

2007-11-07

PDF · 468 SEK
Standard · ASTM ASTM D1412

Standard Test Method for Equilibrium Moisture of Coal at 96 to 97 Percent Relative Humidity and 30°C

DESIG: D1412 07 ^TITLE: Standard Test Method for Equilibrium Moisture of Coal at 96 to 97 Percent Relative Humidity and 30C ^SCOPE:1. Scope 1.1 This test method covers determination of the equilib...

Språk

Publicerad

2007-11-07

PDF · 533 SEK
Standard · ASTM ASTM D2797

Standard Practice for Preparing Coal Samples for Microscopical Analysis by Reflected Light

1.1 This practice covers laboratory procedures for the preparation of granular samples of bituminous coal and anthracite samples for examination with a microscope using reflected light illumination...

Språk

Publicerad

2007-11-07

PDF · 533 SEK
Standard · ASTM ASTM D5061

Standard Test Method for Microscopical Determination of the Textural Components of Metallurgical Coke

1.1 This test method covers the equipment and procedures used for determining the types and amounts of coke carbon forms and associated recognizable coal- and process-derived textural components in...

Språk

Publicerad

2007-11-07

PDF · 533 SEK
Standard · ASTM ASTM F2328M

Standard Test Method for Determining Decarburization and Carburization in Hardened and Tempered Threaded Steel Bolts, Screws and Studs [Metric]

1.1 This test method covers procedures for measuring, classifying, and determining the presence of decarburization and carburization in the threaded section of hardened and tempered metric steel bo...

Språk

Publicerad

2007-11-07

PDF · 468 SEK
Standard · ASTM ASTM D5022

Standard Specification for Identification of Vials and Ampoules Containing Concentrated Solutions of Drugs to be Diluted Before Use

1.1 This specification deals with identification of small volume containers of drugs intended to be diluted before parenteral administration, as follows:1.1.1 Container shape,1.1.2 Labeling stateme...

Språk

Publicerad

2007-11-07

PDF · 468 SEK
Standard · ASTM ASTM E1735

Standard Test Method for Determining Relative Image Quality of Industrial Radiographic Film Exposed to X-Radiation from 4 to 25 MeV

1.1 This test method covers determination of the relative image quality response of industrial radiographic film when exposed to X-radiation sources having photon energies from 4 to 25 MeV. Evaluat...

Språk

Publicerad

2007-05-09

PDF · 533 SEK
Standard · ASTM ASTM D5954

Standard Test Method for Mercury Sampling and Measurement in Natural Gas by Atomic Absorption Spectroscopy

1.1 This test covers the determination of total mercury in natural gas at concentrations down to 1 ng/m3. It includes separate procedures for both sampling and atomic absorption spectrophotometric ...

Språk

Publicerad

2007-05-09

PDF · 533 SEK
Standard · ASTM ASTM C90

Standard Specification for Loadbearing Concrete Masonry Units

1.1 This specification covers hollow and solid (see and ) concrete masonry units made from hydraulic cement, water, and mineral aggregates with or without the inclusion of other materials. There a...

Språk

Publicerad

2007-02-07

Upphävd

2008-11-01

PDF · 468 SEK
Standard · ASTM ASTM D1143/D1143M

Standard Test Methods for Deep Foundations Under Static Axial Compressive Load

1.1 The test methods described in this standard measure the axial deflection of a vertical or inclined deep foundation when loaded in static axial compression. These methods apply to all deep found...

Språk

Publicerad

2007-09-05

PDF · 611 SEK
Standard · ASTM ASTM D4427

Standard Classification of Peat Samples by Laboratory Testing

1.1 This classification is a system for subdividing and assigning nomenclature to peat samples through laboratory tests. This standard does not purport to address all of the safety problems, if any...

Språk

Publicerad

2007-05-09

Upphävd

2007-05-01

PDF · 468 SEK
Standard · ASTM ASTM ANSI/ISO10651.5

Lung Ventilators for Medical Use - Particular Requirements for Basic Safety - and Essential Performance

This part of ISO 10651 specifies the basic safety and essential performance requirements for gas-powered emergency resuscitators (3.10) intended for use with humans by first responders. This equipm...

Språk

Publicerad

2007-05-09

PDF · 858 SEK
Standard · ASTM ASTM F2442

Standard Guide for Layout of Ice Arena

1.1 This guide for the layout of the ice rink/arenas includes guidelines for developing an artificial indoor ice rink/arena. This guide describes systematic procedures and criteria for the developm...

Språk

Publicerad

2007-05-09

PDF · 533 SEK
Standard · ASTM ASTM F2194

Standard Consumer Safety Specification for Bassinets and Cradles

1.1 This consumer safety specification covers performance requirements, test methods, and marking requirements to promote safe use of bassinets and cradles.1.2 This consumer safety performance spec...

Språk

Publicerad

2007-05-09

Upphävd

2007-10-01

PDF · 533 SEK
Standard · ASTM ASTM F1166

Standard Practice for Human Engineering Design for Marine Systems, Equipment, and Facilities

1.1 This practice provides ergonomic design criteria from a human-machine perspective for the design and construction of maritime vessels and structures and for equipments, systems, and subsystems ...

Språk

Publicerad

2007-05-09

PDF · 1.118 SEK
Standard · ASTM ASTM D87

Standard Test Method for Melting Point of Petroleum Wax (Cooling Curve)

1.1 This test method covers the determination of the melting point (cooling curve) of petroleum wax. It is unsuitable for waxes of the petrolatum group, microcrystalline waxes, or blends of such wa...

Språk

Publicerad

2007-05-09

Upphävd

2007-11-01

PDF · 468 SEK
Standard · ASTM ASTM D6322

Standard Guide to International Test Methods Associated with Textile Care Procedures

1.1 This guide lists general home laundering and commercial drycleaning textile care procedures and the associated ASTM (American Society for Testing and Materials), AATCC (American Association of ...

Språk

Publicerad

2007-05-09

PDF · 533 SEK
Standard · ASTM ASTM A765/A765M

Standard Specification for Carbon Steel and Low-Alloy Steel Pressure-Vessel-Component Forgings with Mandatory Toughness Requirements

1.1 This specification covers heat-treated carbon steel and alloy steel forgings with mandatory toughness requirements. These forgings are intended for pressure vessels, feedwater heaters, and simi...

Språk

Publicerad

2004-07-01

Upphävd

2007-09-01

PDF · 468 SEK
Standard · ASTM ASTM E1251

Test Method for Analysis of Aluminum and Aluminum Alloys by Atomic Emission Spectrometry

1.1 This test method describes the analysis of aluminum and its alloys by atomic emission spectrometry. The aluminum specimen to be analyzed may be in the form of a chill cast disk, casting, foil, ...

Språk

Publicerad

2004-07-01

Upphävd

2007-06-01

PDF · 611 SEK
Standard · ASTM ASTM D2178

Standard Specification for Asphalt Glass Felt Used in Roofing and Waterproofing

1.1 This specification covers glass felts impregnated with asphalt that may be used with asphalts conforming to the requirements of Specification D 312 in the construction of built-up roofs, and wi...

Språk

Publicerad

2004-10-01

PDF · 468 SEK
Standard · ASTM ASTM E2531

Standard Guide for Development of Conceptual Site Models and Remediation Strategies for Light Nonaqueous-Phase Liquids Released to the Subsurface

1.1 This guide applies to sites with LNAPL present as residual, free, or mobile phases, and anywhere that LNAPL is a source for impacts in soil, ground water, and soil vapor. Use of this guide may ...

Språk

Publicerad

2007-03-14

PDF · 923 SEK
Standard · ASTM ASTM E2079

Standard Test Methods for Limiting Oxygen (Oxidant) Concentration in Gases and Vapors

1.1 These test methods cover the determination of the limiting oxygen (oxidant) concentration of mixtures of oxygen (oxidant) and inert gases with flammable gases and vapors at a specified initial ...

Språk

Publicerad

2007-03-14

PDF · 533 SEK
Visa varukorgen Fortsätt handla 0
Varukorgen Stäng
Annonstext