21317 träffar på

ASTM D1102
Standard · ASTM ASTM D1102

Standard Test Method for Ash in Wood

1.1 This test method covers the determination of ash, expressed as the percentage of residue remaining after dry oxidation (oxidation at 580 to 600°C), of wood or wood products.1.2 This st...

Språk

Publicerad

2007-05-09
PDF · 468 SEK
ASTM D2746
Standard · ASTM ASTM D2746

Standard Test Method for Staining Tendency of Asphalt (Stain Index)

1.1 This test method covers the determination of the staining tendency of asphalt and the assignment of a stain index proportional to the extent of staining observed.1.2 This test method is applica...

Språk

Publicerad

2007-09-05
PDF · 468 SEK
ASTM F1520
Standard · ASTM ASTM F1520

Standard Test Method for Determining the Drive Torque for Film and Fabric Ribbon Cartridges

1.1 This test method describes a procedure for determining the drive torque of typewriter and printer cartridges using a handheld torque gage. This test method is applicable to cartridges that con...

Språk

Publicerad

2008-07-01
PDF · 468 SEK
ASTM F1270
Standard · ASTM ASTM F1270

Standard Practice for Preparing and Locating Emergency Muster Lists

1.1 This practice sets forth the elements to be included in an emergency muster list, including emergency signals, and its location on a vessel or facility. This practice also includes emergency in...

Språk

Publicerad

2007-09-05
PDF · 468 SEK
ASTM D5651
Standard · ASTM ASTM D5651

Standard Test Method for Surface Bond Strength of Wood-Base Fiber and Particle Panel Materials

1.1 This test method is a measure of the cohesive bond strength of the fibers, or particles, on the surface of wood-base fiber and particle panels (for example, particleboard and medium-density fib...

Språk

Publicerad

2008-08-01
PDF · 468 SEK
ASTM E1058
Standard · ASTM ASTM E1058

Standard Test Methods for the Toxic Contamination of the Environment in the Operator Enclosure of Self-Propelled Agriculture Vehicles (Withdrawn 2010)

1.1 This practice may be used to determine the level of specific harmful airborne contaminants within a vehicle operator enclosure under standardized test conditions. The air exchange rate, air pre...

Språk

Publicerad

2002-04-10

Upphävd

2010-10-01
PDF · 533 SEK
ASTM E1864
Standard · ASTM ASTM E1864

Standard Practice for Evaluating Quality Systems of Organizations Conducting Facility and Hazard Assessments for Lead in Paint, Dust, Airborne Part...

1.1 This practice covers the quality system requirements, competency and qualifications, to include minimum requirements for training, sampling design, personnel and equipment, duties, responsibili...

Språk

Publicerad

2002-07-10

Upphävd

2011-01-01
PDF · 533 SEK
ASTM F834
Standard · ASTM ASTM F834

Standard Consumer Safety Specification for Toy Chests

1.1 This consumer safety specification covers the performance requirements and test methods to ensure the safety of toy chests. 1.2 This consumer safety specification is intended to minimize the ac...

Språk

Publicerad

2008-08-15
PDF · 468 SEK
ASTM D2112
Standard · ASTM ASTM D2112

Standard Test Method for Oxidation Stability of Inhibited Mineral Insulating Oil by Pressure Vessel

1.1 This test method covers and is intended as a rapid method for the evaluation of the oxidation stability of new mineral insulating oils containing a synthetic oxidation inhibitor. This test is c...

Språk

Publicerad

2007-09-05
PDF · 533 SEK
ASTM D2190
Standard · ASTM ASTM D2190

Standard Specification for Vinyl Acetate

1.1 This specification covers vinyl acetate.1.2 The following applies to all specified limits in this standard; for purposes of determining conformance with this standard, an observed value or a ca...

Språk

Publicerad

2007-09-05
PDF · 468 SEK
ASTM D1933
Standard · ASTM ASTM D1933

Standard Specification for Nitrogen Gas as an Electrical Insulating Material

1.1 This specification covers three types of nitrogen used as an electrical insulating material in electrical equipment: 1.1.1 Type I, obtained from the air by liqu This specification covers three...

Språk

Publicerad

2008-05-01
PDF · 468 SEK
ASTM F1858
Standard · ASTM ASTM F1858

Standard Performance Requirements for Multipositional Plastic Chairs with Adjustable Backs or Reclining Mechanisms for Outdoor Use

1.1 These performance requirements cover nationally recognized performance requirements for multipositional plastic chairs, with adjustable backs or reclining mechanisms, intended for outdoor use. ...

Språk

Publicerad

2008-08-01
PDF · 533 SEK
ASTM D5466
Standard · ASTM ASTM D5466

Standard Test Method for Determination of Volatile Organic Chemicals in Atmospheres (Canister Sampling Methodology)

1.1 This test method describes a procedure for sampling and analysis of volatile organic compounds (VOCs) in ambient, indoor, or workplace atmospheres. The test method is based on the collection of...

Språk

Publicerad

2007-09-05
PDF · 767 SEK
ASTM C1082
Standard · ASTM ASTM C1082

Standard Specification for Asbestos-Cement Flat Sheet for Cooling Tower Fill

1.1 This specification covers three classes of flat asbestos-cement sheets for use as cooling tower fill. 1.2 Specifically excluded from this specification are asbestos-cement products intended for...

Språk

Publicerad

2008-05-01
PDF · 468 SEK
ASTM D5093
Standard · ASTM ASTM D5093

Standard Test Method for Field Measurement of Infiltration Rate Using Double-Ring Infiltrometer with Sealed-Inner Ring

1.1 This test method describes a procedure for measuring the infiltration rate of water through in-place soils using a double-ring infiltrometer with a sealed inner ring. 1.2 This test method is us...

Språk

Publicerad

2008-09-01
PDF · 533 SEK
ASTM F615M
Standard · ASTM ASTM F615M

Standard Practice for Determining Safe Current Pulse-Operating Regions for Metallization on Semiconductor Components (Metric)

1.1 This practice covers procedures for determining operating regions that are safe from metallization burnout induced by current pulses of less than 1-s duration. Note 1—In this practic

Språk

Publicerad

2008-06-15
PDF · 533 SEK
ASTM D6037
Standard · ASTM ASTM D6037

Standard Test Methods for Dry Abrasion Mar Resistance of High Gloss Coatings

1.1 Two test methods are included. Test Method A uses a device that contains an abrasive wheel. Test Method B uses a device that contains a wheel that has been fitted with abrasive paper. Eithe...

Språk

Publicerad

2008-07-01
PDF · 468 SEK
ASTM F1515
Standard · ASTM ASTM F1515

Standard Test Method for Measuring Light Stability of Resilient Flooring by Color Change

1.1 This test method covers a procedure for determining the resistance of resilient floor covering to color change from exposure to light over a specified period of time. 1.2 This standard does not pu

Språk

Publicerad

2008-05-01
PDF · 468 SEK
ASTM F307
Standard · ASTM ASTM F307

Standard Practice for Sampling Pressurized Gas for Gas Analysis

1.1 This practice describes the procedure for obtaining a sample of pressurized gas for gas analysis from a system or component.1.2 The values stated in SI units are to be regarded as the standard....

Språk

Publicerad

2007-09-05
PDF · 468 SEK
ASTM D3996
Standard · ASTM ASTM D3996

Standard Performance Specification for Knit Swimwear Fabrics

1.1 This performance specification covers circular and warp knitted fabrics for use in knit swimwear, composed of any textile fiber or mixture of textile fibers. 1.2 These requirements apply to bo...

Språk

Publicerad

2008-08-01
PDF · 468 SEK
ASTM F1312
Standard · ASTM ASTM F1312

Standard Specification for Brick, Insulating, High Temperature, Fire Clay

1.1 This specification covers one type of thermal insulating brick for use as backup insulation for refractory furnace linings of boiler furnaces.1.2 The values stated in inch-pound units are to be...

Språk

Publicerad

2007-09-05
PDF · 468 SEK
ASTM D4066
Standard · ASTM ASTM D4066

Standard Classification System for Nylon Injection and Extrusion Materials (PA)

1.1 This classification system covers nylon materials suitable for injection molding and extrusion. Some of these compositions are also suitable for compression molding and application from solutio...

Språk

Publicerad

2008-09-15
PDF · 611 SEK
ASTM D5086
Standard · ASTM ASTM D5086

Standard Test Method for Determination of Calcium, Magnesium, Potassium, and Sodium in Atmospheric Wet Deposition by Flame Atomic Absorption Spectr...

1.1 This test method is applicable to the determination of calcium, magnesium, potassium, and sodium in atmospheric wet deposition (rain, snow, sleet, and hail) by flame atomic absorption spectrop...

Språk

Publicerad

2008-04-01
PDF · 533 SEK
ASTM C338
Standard · ASTM ASTM C338

Standard Test Method for Softening Point of Glass

1.1 This test method covers the determination of the softening point of a glass by determining the temperature at which a round fiber of the glass, nominally 0.65 mm in diameter and 235 mm long wit...

Språk

Publicerad

2008-04-01
PDF · 468 SEK
ASTM F2179
Standard · ASTM ASTM F2179

Standard Specification for Annealed Soda-Lime-Silicate Glass Containers That Are Produced for Use as Candle Containers

1.1 This specification covers the minimum requirements for annealed soda-lime-silicate glass containers when the producer knows the containers are to be used as candle containers.This standard does...

Språk

Publicerad

2002-01-01
PDF · 468 SEK
ASTM C912
Standard · ASTM ASTM C912

Standard Practice for Designing a Process for Cleaning Technical Glasses

1.1 This practice covers information that will permit design of a rational cleaning procedure that can be used with a glass that is somewhat soluble in many aqueous chemical solutions. Typically, t...

Språk

Publicerad

2008-09-01
PDF · 533 SEK
ASTM D6033
Standard · ASTM ASTM D6033

Standard Guide for Describing the Functionality of a Ground-Water Modeling Code

1.1 This guide presents a systematic approach to the classification and description of computer codes used in ground-water modeling. Due to the complex nature of fluid flow and biotic and chemical ...

Språk

Publicerad

2008-09-15
PDF · 533 SEK
ASTM D5179
Standard · ASTM ASTM D5179

Standard Test Method for Surface Area of Catalysts and Catalyst Carriers

1.1 This test method covers the determination of surface areas of catalyst and catalyst carriers that have Type II or IV nitrogen adsorption isotherms, and at least 1 m2/g of area. A volumetric me...

Språk

Publicerad

2002-10-01
PDF · 533 SEK
ASTM D1331
Standard · ASTM ASTM D1331

Standard Test Methods for Surface and Interfacial Tension of Solutions of Surface-Active Agents (Withdrawn 2010)

1.1 These test methods cover the determination of surface tension and interfacial tension of solutions of surface-active agents, as defined in Terminology D 459. Two methods are covered as follows:...

Språk

Publicerad

1989-05-26

Upphävd

2010-02-01
PDF · 468 SEK
ASTM B866
Standard · ASTM ASTM B866

Standard Test Method for Gross Defects and Mechanical Damage in Metallic Coatings by Polysulfide Immersion

1.1 This test method covers equipment and methods for detecting gross defects and mechanical damage (including wear-through) in metallic coatings where the breaks in the coating penetrate down to a...

Språk

Publicerad

2008-08-01
PDF · 468 SEK
Förfina din sökning genom att visa:
...som handlar om:

Ämnesområden (0)

Avbryt

Branscher (0)

Avbryt

Syfte (0)

Avbryt

Material (0)

Avbryt
Visa varukorgen Fortsätt handla 0
Varukorgen Stäng
Annonstext